mplsFrrGeneralConstraintsTunnelInstance

Object

column MPLS-TC-STD-MIBMplsTunnelInstanceIndex

Uniquely identifies an existing instance of this tunnel
for which fast reroute is requested.  Note that a value of
0 indicates that the configuration points at a tunnel
head (as specified in RFC 3812).  This is typically how
configuration of this feature is performed on devices
where the actual protection LSP used is left up to the
protecting tunnel.  However, in cases where static
configuration is possible, any valid tunnel instance is
permissible.  In these cases, it is recommended that the
instance index follow the following convention so as
to make identification of backup LSPs easier:
              
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros

Context

MIB: MPLS-FRR-GENERAL-STD-MIB
OID: .1.3.6.1.2.1.202.1.3.1.3
Type: column
Access: noaccess
Status: current
Parent: mplsFrrGeneralConstraintsEntry
Table: mplsFrrGeneralConstraintsTable
Siblings: 12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mplsFrrGeneralConstraintsIfIndexOrZero Uniquely identifies an interface that a fast-reroute protection tunnel is configured to potentially protect in the event of a fault. Entries with this index set to 0 indicate tha…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.2.1.202.1.3.1.1`
mplsFrrGeneralConstraintsHopLimit The maximum number of hops that the detour LSP or bypass tunnel may traverse.	column	Unsigned32	`.1.3.6.1.2.1.202.1.3.1.10`
mplsFrrGeneralConstraintsBandwidth The maximum bandwidth specifically reserved for a detour LSP or bypass tunnel, in units of thousands of bits per second (kbps). Note that setting this value to 0 indicates best-e…	column	kilobits per second MPLS-TC-STD-MIBMplsBitRate	`.1.3.6.1.2.1.202.1.3.1.11`
mplsFrrGeneralConstraintsStorageType The storage type for this configuration entry. Conceptual rows having the value 'permanent' need not allow write access to any columnar objects in the row.	column	SNMPv2-TCStorageType	`.1.3.6.1.2.1.202.1.3.1.12`
mplsFrrGeneralConstraintsRowStatus This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except mplsFrrGen…	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.202.1.3.1.13`
mplsFrrGeneralConstraintsTunnelIndex Uniquely identifies a tunnel in the mplsTunnelTable that is configured to possibly protect the interface(s) specified by mplsFrrGeneralConstraintsIfIndexOrZero in the event of a f…	column	MPLS-TC-STD-MIBMplsTunnelIndex	`.1.3.6.1.2.1.202.1.3.1.2`
mplsFrrGeneralConstraintsProtectionType Indicates type of the resource protection: linkProtection(1) indicates that this tunnel is set up to protect a particular link's resources. nodeProte…	column	Enumeration	`.1.3.6.1.2.1.202.1.3.1.4`
mplsFrrGeneralConstraintsSetupPrio Indicates the setup priority of the detour LSP or bypass tunnel.	column	Unsigned32	`.1.3.6.1.2.1.202.1.3.1.5`
mplsFrrGeneralConstraintsHoldingPrio Indicates the holding priority for the detour LSP or bypass tunnel.	column	Unsigned32	`.1.3.6.1.2.1.202.1.3.1.6`
mplsFrrGeneralConstraintsInclAnyAffinity Indicates the include-any link constraint for the detour LSP or bypass tunnel. A link satisfies the include-any constraint if and only if the constraint is zero, or the link and …	column	MPLS-TC-STD-MIBMplsTunnelAffinity	`.1.3.6.1.2.1.202.1.3.1.7`
mplsFrrGeneralConstraintsInclAllAffinity Indicates the include-all link constraint for the detour LSP or bypass tunnel. A link satisfies the include-all constraint if and only if the link contains all of the administrat…	column	MPLS-TC-STD-MIBMplsTunnelAffinity	`.1.3.6.1.2.1.202.1.3.1.8`
mplsFrrGeneralConstraintsExclAnyAffinity Indicates the exclude-any link constraint for the detour LSP or bypass tunnel. A link satisfies the exclude-any constraint if and only if the link contains none of the administra…	column	MPLS-TC-STD-MIBMplsTunnelAffinity	`.1.3.6.1.2.1.202.1.3.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects