MPLS-FRR-GENERAL-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
15

mplsFrrGeneralConstraintsTable

table
.1.3.6.1.2.1.202.1.3 · 1 row entry · 13 columns
Open in standard view 
This table shows detour LSP or bypass tunnel setup
constraints.
mplsFrrGeneralConstraintsEntry entry .1.3.6.1.2.1.202.1.3.1
An entry in this table represents detour LSP or bypass
tunnel setup constraints for an interface or link to be
protected by detour LSPs or a bypass tunnel.

Once the LSP or tunnel instance to be protected is…
Indexes
mplsFrrGeneralConstraintsIfIndexOrZero mplsFrrGeneralConstraintsTunnelIndex mplsFrrGeneralConstraintsTunnelInstance
Column Syntax OID
mplsFrrGeneralConstraintsIfIndexOrZero
Uniquely identifies an interface that a fast-reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicate that the configured protection tunnel prote…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.202.1.3.1.1
mplsFrrGeneralConstraintsTunnelIndex
Uniquely identifies a tunnel in the mplsTunnelTable that
is configured to possibly protect the interface(s) specified
by mplsFrrGeneralConstraintsIfIndexOrZero in the event of a
fault.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.2.1.202.1.3.1.2
mplsFrrGeneralConstraintsTunnelInstance
Uniquely identifies an existing instance of this tunnel
for which fast reroute is requested. Note that a value of
0 indicates that the configuration points at a tunnel
head (as specified in RFC 3812). This is typicall…
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.202.1.3.1.3
mplsFrrGeneralConstraintsProtectionType
Indicates type of the resource protection:

linkProtection(1) indicates that this tunnel is
set up to protect a particular link's resources.

nodeProtection(2) indicates that this tunnel is
s…
Enumerationr/w
Enumerated Values:
1linkProtection
2nodeProtection
 .1.3.6.1.2.1.202.1.3.1.4
mplsFrrGeneralConstraintsSetupPrio
Indicates the setup priority of the detour LSP
or bypass tunnel.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.2.1.202.1.3.1.5
mplsFrrGeneralConstraintsHoldingPrio
Indicates the holding priority for the detour LSP
or bypass tunnel.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.2.1.202.1.3.1.6
mplsFrrGeneralConstraintsInclAnyAffinity
Indicates the include-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-any constraint if and only if the constraint
is zero, or the link and the constraint have a
resource class in …
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.202.1.3.1.7
mplsFrrGeneralConstraintsInclAllAffinity
Indicates the include-all link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-all constraint if and only if the link contains
all of the administrative groups specified in the
constraint.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.202.1.3.1.8
mplsFrrGeneralConstraintsExclAnyAffinity
Indicates the exclude-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
exclude-any constraint if and only if the link contains
none of the administrative groups specified in the
constraint.
MPLS-TC-STD-MIBMplsTunnelAffinityr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelAffinity Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.202.1.3.1.9
mplsFrrGeneralConstraintsHopLimit
The maximum number of hops that the detour LSP or
bypass tunnel may traverse.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.2.1.202.1.3.1.10
mplsFrrGeneralConstraintsBandwidth
The maximum bandwidth specifically reserved for a detour
LSP or bypass tunnel, in units of thousands of bits
per second (kbps). Note that setting this value to 0
indicates best-effort treatment.
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.202.1.3.1.11
mplsFrrGeneralConstraintsStorageType
The storage type for this configuration entry.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar

objects in the row.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.2.1.202.1.3.1.12
mplsFrrGeneralConstraintsRowStatus
This object is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1)
state, no objects in that row can be modified
except mplsFrrGeneralConstraintsRowStatus and
mplsFrrGene…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.2.1.202.1.3.1.13

mplsFrrGeneralTunnelARHopTable

table
.1.3.6.1.2.1.202.1.4 · 1 row entry · 2 columns
Open in standard view 
This table sparsely extends mplsTunnelARHopTable defined
in the MPLS-TE-STD-MIB module with fast-reroute objects.
These objects specify the status of local protection,
including availability and active use, on a per-hop basis,
of hops traversed by a protected tunnel.
mplsFrrGeneralTunnelARHopEntry entry .1.3.6.1.2.1.202.1.4.1
This entry contains fast-reroute protection status of a
single protected tunnel hop.
Indexes
MPLS-TE-STD-MIBmplsTunnelARHopListIndex MPLS-TE-STD-MIBmplsTunnelARHopIndex
Column Syntax OID
mplsFrrGeneralTunnelARHopSessionAttributeFlags
This object indicates the desired values for the
associated SESSION_ATTRIBUTE flags. Note that since
this object is a BITS type, the bits may be set to
indicate various desired combinations of the
SESSION_ATTRIBUTE fla…
Bits
Enumerated Values:
0arHopSessionAttrFlagsUnsupported
1localProtectionDesired
2labelRecordingDesired
3sestyleDesired
4bandwidthProtectionDesired
5nodeProtectionDesired
 .1.3.6.1.2.1.202.1.4.1.1
mplsFrrGeneralTunnelARHopRROSubObjectFlags
This object indicates the flags that are currently
in use by the associated Record Route Object (RRO)
sub-object.

Note that since this object is a BITS type,
the bits may be set to indicate various combin…
Bits
Enumerated Values:
0arHopRROSubObjectFlagsUnsupported
1localProtectionAvailable
2localProtectionInUse
3bandwidthProtection
4nodeProtection
 .1.3.6.1.2.1.202.1.4.1.2