mplsFrrGeneralConstraintsEntry
MPLS-FRR-GENERAL-STD-MIB ·
.1.3.6.1.2.1.202.1.3.1
Object
row
An entry in this table represents detour LSP or bypass
tunnel setup constraints for an interface or link to be
protected by detour LSPs or a bypass tunnel.
Once the LSP or tunnel instance to be protected is identified
in the mplsTunnelTable, the corresponding mplsTunnelIfIndex
value of that tunnel can be used to get the ifIndex of
the underlying physical interface using the ifStackTable.
That ifIndex of the underlying physical interface will
be used as mplsFrrGeneralConstraintsIfIndexOrZero in this
table to protect the LSPs or tunnel instances determined
earlier.
It is recommended that ifIndex persistence be enabled
across re-initializations. If persistence is not
implemented, then the value of
mplsFrrGeneralConstraintsIfIndexOrZero in this
table cannot be guaranteed across restarts and all entries
in this table MUST NOT be persistent, or the values of
mplsFrrGeneralConstraintsIfIndexOrZero MUST be reconstructed
on restart.
SNMP engines must only allow entries in this table
to be created for tunnel instances that require fast reroute
as indicated by the presence of the FAST_REROUTE object
in the signaling for the LSP in question.
An entry in this table can be created only if a
corresponding entry in mplsTunnelTable exists with the
same mplsTunnelIndex as mplsFrrGeneralConstraintsTunnelIndex.
Entries in this table are deleted when the corresponding
entries in mplsTunnelTable are deleted.
It is recommended that entries in this table be persistent
across reboots.
Entries indexed with mplsFrrGeneralConstraintsIfIndexOrZero
and set to 0 apply to all interfaces on this device for
which the FRR feature can operate.
If the mplsTunnelInstance object is set to a value of 0,
it indicates that the mplsTunnelEntry contains a tunnel
ingress. This is typically how configuration of this
feature is performed on devices where the actual
protection LSP used is left up to the protecting tunnel.
However, in cases where static configuration is
possible, any valid tunnel instance is possible;
however, it is strongly RECOMMENDED that the instance
index SHOULD use the following convention to identify
backup LSPs:
- lower 16 bits : protected tunnel instance
- higher 16 bits: must be all zeros
Context
- MIB
- MPLS-FRR-GENERAL-STD-MIB
- OID
.1.3.6.1.2.1.202.1.3.1- Type
- row
- Status
- current
- Parent
- mplsFrrGeneralConstraintsTable
- Table
- mplsFrrGeneralConstraintsTable
- Children
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsFrrGeneralConstraintsIfIndexOrZero Uniquely identifies an interface that a fast-reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicate tha… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.202.1.3.1.1 |
| mplsFrrGeneralConstraintsHopLimit The maximum number of hops that the detour LSP or
bypass tunnel may traverse. | column | Unsigned32 | .1.3.6.1.2.1.202.1.3.1.10 |
| mplsFrrGeneralConstraintsBandwidth The maximum bandwidth specifically reserved for a detour
LSP or bypass tunnel, in units of thousands of bits
per second (kbps). Note that setting this value to 0
indicates best-e… | column | kilobits per second MPLS-TC-STD-MIBMplsBitRate | .1.3.6.1.2.1.202.1.3.1.11 |
| mplsFrrGeneralConstraintsStorageType The storage type for this configuration entry.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.202.1.3.1.12 |
| mplsFrrGeneralConstraintsRowStatus This object is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1)
state, no objects in that row can be modified
except mplsFrrGen… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.202.1.3.1.13 |
| mplsFrrGeneralConstraintsTunnelIndex Uniquely identifies a tunnel in the mplsTunnelTable that
is configured to possibly protect the interface(s) specified
by mplsFrrGeneralConstraintsIfIndexOrZero in the event of a
f… | column | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.2.1.202.1.3.1.2 |
| mplsFrrGeneralConstraintsTunnelInstance Uniquely identifies an existing instance of this tunnel
for which fast reroute is requested. Note that a value of
0 indicates that the configuration points at a tunnel
head (as s… | column | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.2.1.202.1.3.1.3 |
| mplsFrrGeneralConstraintsProtectionType Indicates type of the resource protection:
linkProtection(1) indicates that this tunnel is
set up to protect a particular link's resources.
nodeProte… | column | Enumeration | .1.3.6.1.2.1.202.1.3.1.4 |
| mplsFrrGeneralConstraintsSetupPrio Indicates the setup priority of the detour LSP
or bypass tunnel. | column | Unsigned32 | .1.3.6.1.2.1.202.1.3.1.5 |
| mplsFrrGeneralConstraintsHoldingPrio Indicates the holding priority for the detour LSP
or bypass tunnel. | column | Unsigned32 | .1.3.6.1.2.1.202.1.3.1.6 |
| mplsFrrGeneralConstraintsInclAnyAffinity Indicates the include-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-any constraint if and only if the constraint
is zero, or the link and … | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.2.1.202.1.3.1.7 |
| mplsFrrGeneralConstraintsInclAllAffinity Indicates the include-all link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-all constraint if and only if the link contains
all of the administrat… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.2.1.202.1.3.1.8 |
| mplsFrrGeneralConstraintsExclAnyAffinity Indicates the exclude-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
exclude-any constraint if and only if the link contains
none of the administra… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.2.1.202.1.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsFrrGeneralConstraintsIfIndexOrZero Uniquely identifies an interface that a fast-reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicate tha… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.202.1.3.1.1 |
| mplsFrrGeneralConstraintsTunnelIndex Uniquely identifies a tunnel in the mplsTunnelTable that
is configured to possibly protect the interface(s) specified
by mplsFrrGeneralConstraintsIfIndexOrZero in the event of a
f… | column | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.2.1.202.1.3.1.2 |
| mplsFrrGeneralConstraintsTunnelInstance Uniquely identifies an existing instance of this tunnel
for which fast reroute is requested. Note that a value of
0 indicates that the configuration points at a tunnel
head (as s… | column | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.2.1.202.1.3.1.3 |