mplsFrrGeneralConstraintsBandwidth
MPLS-FRR-GENERAL-STD-MIB ·
.1.3.6.1.2.1.202.1.3.1.11
Object
The maximum bandwidth specifically reserved for a detour LSP or bypass tunnel, in units of thousands of bits per second (kbps). Note that setting this value to 0 indicates best-effort treatment.
Context
- MIB
- MPLS-FRR-GENERAL-STD-MIB
- OID
.1.3.6.1.2.1.202.1.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kilobits per second
- Parent
- mplsFrrGeneralConstraintsEntry
- Table
- mplsFrrGeneralConstraintsTable
- Siblings
- 12
Syntax
kilobits per second MPLS-TC-STD-MIBMplsBitRate
- Source
- MPLS-TC-STD-MIBMplsBitRate
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsFrrGeneralConstraintsIfIndexOrZero Uniquely identifies an interface that a fast-reroute
protection tunnel is configured to potentially protect
in the event of a fault. Entries with this index set to
0 indicate tha… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.202.1.3.1.1 |
| mplsFrrGeneralConstraintsHopLimit The maximum number of hops that the detour LSP or
bypass tunnel may traverse. | column | Unsigned32 | .1.3.6.1.2.1.202.1.3.1.10 |
| mplsFrrGeneralConstraintsStorageType The storage type for this configuration entry.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.202.1.3.1.12 |
| mplsFrrGeneralConstraintsRowStatus This object is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1)
state, no objects in that row can be modified
except mplsFrrGen… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.202.1.3.1.13 |
| mplsFrrGeneralConstraintsTunnelIndex Uniquely identifies a tunnel in the mplsTunnelTable that
is configured to possibly protect the interface(s) specified
by mplsFrrGeneralConstraintsIfIndexOrZero in the event of a
f… | column | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.2.1.202.1.3.1.2 |
| mplsFrrGeneralConstraintsTunnelInstance Uniquely identifies an existing instance of this tunnel
for which fast reroute is requested. Note that a value of
0 indicates that the configuration points at a tunnel
head (as s… | column | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.2.1.202.1.3.1.3 |
| mplsFrrGeneralConstraintsProtectionType Indicates type of the resource protection:
linkProtection(1) indicates that this tunnel is
set up to protect a particular link's resources.
nodeProte… | column | Enumeration | .1.3.6.1.2.1.202.1.3.1.4 |
| mplsFrrGeneralConstraintsSetupPrio Indicates the setup priority of the detour LSP
or bypass tunnel. | column | Unsigned32 | .1.3.6.1.2.1.202.1.3.1.5 |
| mplsFrrGeneralConstraintsHoldingPrio Indicates the holding priority for the detour LSP
or bypass tunnel. | column | Unsigned32 | .1.3.6.1.2.1.202.1.3.1.6 |
| mplsFrrGeneralConstraintsInclAnyAffinity Indicates the include-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-any constraint if and only if the constraint
is zero, or the link and … | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.2.1.202.1.3.1.7 |
| mplsFrrGeneralConstraintsInclAllAffinity Indicates the include-all link constraint for the
detour LSP or bypass tunnel. A link satisfies the
include-all constraint if and only if the link contains
all of the administrat… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.2.1.202.1.3.1.8 |
| mplsFrrGeneralConstraintsExclAnyAffinity Indicates the exclude-any link constraint for the
detour LSP or bypass tunnel. A link satisfies the
exclude-any constraint if and only if the link contains
none of the administra… | column | MPLS-TC-STD-MIBMplsTunnelAffinity | .1.3.6.1.2.1.202.1.3.1.9 |