sysinfoBoardMemoryHighRAMUsage

LUM-SYSINFO-MIB · .1.3.6.1.4.1.8708.2.71.2.3.1.1.7
Commands MIB view Table view

Object

column LUM-TCFaultStatus 
Alarm raised when the RAM memory utilization exceeds the
given threshold of 70%.
The reason for this could be that the current configuration
is too large for the current CU. If an old CU variant is used, consider
upgrading to a newer variant.
              
Warning: While this alarm is active, it is not recommended to upgrade
the node to a newer software release, since this procedure requires
a significant amount of memory. If the problem persists, please contact
Customer Service.
              
A: RAM usage above threshold
              
D: RAM usage below threshold

Context

MIB
LUM-SYSINFO-MIB
OID
.1.3.6.1.4.1.8708.2.71.2.3.1.1.7
Type
column
Access
readonly
Status
current
Parent
sysinfoBoardMemoryEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardMemoryHighRAMUsage'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardMemoryHighRAMUsage.<sysinfoBoardMemoryIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-SYSINFO-MIB::sysinfoBoardMemoryHighRAMUsage'

Syntax

LUM-TCFaultStatus
Source
LUM-TCFaultStatus
Base type
Enumeration
Type Description
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.
          
ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
          
alarm - indicates that a fault condition is present
and an alarm is active.
          
Note: The list of FaultStatus objects forms the list of all
potential alarms for the system.

Values & Constraints

Type Values
1ok
2alarm

Conformance

Member of
sysinfoBoardMemoryGroup