LUM-SYSINFO-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
33
sysinfoBoardStartupTable
table.1.3.6.1.4.1.8708.2.71.2.1.1
·
1 row entry
·
5 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sysinfoBoardStartupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardStartupTable'
The board startup list.
An entry in the board startup list.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
An arbitrary index assigned to each board entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.71.2.1.1.1.1 |
|
Object name, [boardName]:[subrack]:[slot]
|
LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
.1.3.6.1.4.1.8708.2.71.2.1.1.1.2 |
|
Uptime since boot. Syntax (same as 'uptime' and 'top' linux commands):
- 'mm min', example: '23 minutes', or - 'hh:mm', example: '14:08', meaning 14 hours and 8 minutes, or - 'days, mm min', example: '36 days and 48 min… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.8708.2.71.2.1.1.1.3 |
|
Uptime since boot expressed in seconds.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.1.1.1.4 |
|
Reason for the last reboot.
Possible reasons are: - Software upgrade (SWU) function - Watchdog reboot due to a nonrecoverable failure condition - FW activation - Nonrecoverable configuration mismatch betw… |
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.8708.2.71.2.1.1.1.5 |
sysinfoBoardLoadTable
table.1.3.6.1.4.1.8708.2.71.2.2.1
·
1 row entry
·
5 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sysinfoBoardLoadTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardLoadTable'
The board load average list.
An entry in the board list. One entry for each board.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
An arbitrary index assigned to each board entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.71.2.2.1.1.1 |
|
Object name, [boardName]:[subrack]:[slot]
|
LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
.1.3.6.1.4.1.8708.2.71.2.2.1.1.2 |
|
System load averages is the average number of processes that are
either in a runnable or uninterruptable state. A process in a runnable state is either using the CPU or waiting to use the CPU. A process in uninterrupta… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.2.1.1.3 |
|
System load averages is the average number of processes that are
either in a runnable or uninterruptable state. A process in a runnable state is either using the CPU or waiting to use the CPU. A process in uninterrupta… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.2.1.1.4 |
|
System load averages is the average number of processes that are
either in a runnable or uninterruptable state. A process in a runnable state is either using the CPU or waiting to use the CPU. A process in uninterrupta… |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.2.1.1.5 |
sysinfoBoardMemoryTable
table.1.3.6.1.4.1.8708.2.71.2.3.1
·
1 row entry
·
8 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sysinfoBoardMemoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardMemoryTable'
The board memory list.
An entry in the board list. One entry for each board.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
An arbitrary index assigned to each board entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.1 |
||||
|
Object name, [boardName]:[subrack]:[slot]
|
LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.2 |
||||
|
Total usable memory.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.3 |
||||
|
The amount of physical memory not used by the system.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.4 |
||||
|
An estimate of how much memory is available for starting new applications, without swapping.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.5 |
||||
|
Memory utilization expressed as a percentage. Based on available memory.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.6 |
||||
|
Alarm raised when the RAM memory utilization exceeds the
given threshold of 70%. The reason for this could be that the current configuration is too large for the current CU. If an old CU variant is used, consider upgrad… |
LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.7 |
||||
|
The administrative state for the board memory
Up - Alarms are reported Down - Alarms are inhibited |
LUM-TCAdminStatusr/w Type Values:
Description: The administrative state with only up and down. down - The interface should be inactive. up - The interface should be activated. |
.1.3.6.1.4.1.8708.2.71.2.3.1.1.8 |
sysinfoBoardProcessTable
table.1.3.6.1.4.1.8708.2.71.2.4.1
·
1 row entry
·
12 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sysinfoBoardProcessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardProcessTable'
The board process list.
An entry for each process per board.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
An arbitrary index assigned to each board entry.
|
Unsigned32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.1 |
||||
|
Object name, [boardName]:[subrack]:[slot]:[localIndex]
|
LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.2 |
||||
|
Process name. Child processes are displayed within brackets ().
|
LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.3 |
||||
|
Process ID.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.4 |
||||
|
Virtual memory size.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.5 |
||||
|
Resident set size.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.6 |
||||
|
Sets the reference values for virtual memory size
and resident set size |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.8708.2.71.2.4.1.1.7 |
||||
|
Virtual memory size reference value.
|
LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.8 |
||||
|
Resident set size reference value.
|
LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.9 |
||||
|
Difference between the current virtual memory size
and its reference value. |
LUM-TCInteger32WithNA Type Constraints: range: 0..2147483647Description: An Integer32 of an object between 0 and 2147483645. 2147483647 is used to indicate that the attribute is not used on the object. 2147483646 is used to indicate that the attribute is not available currently |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.10 |
||||
|
Difference between the current resident set size
and its reference value. |
LUM-TCInteger32WithNA Type Constraints: range: 0..2147483647Description: An Integer32 of an object between 0 and 2147483645. 2147483647 is used to indicate that the attribute is not used on the object. 2147483646 is used to indicate that the attribute is not available currently |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.11 |
||||
|
Time where reference values were saved.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.8708.2.71.2.4.1.1.12 |
.1.3.6.1.4.1.8708.2.71.2.5.1
·
1 row entry
·
3 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sysinfoBoardConfigMetadataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::sysinfoBoardConfigMetadataTable'
The boardConfigMetadata list.
An entry in the BoardConfigMetadata list.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The index assigned to each entry.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.8708.2.71.2.5.1.1.1 |
|
The management name of the interface, for example
'boardConfigMetadata:1:2', where the first number indicates subrack and the second slot. |
LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. |
.1.3.6.1.4.1.8708.2.71.2.5.1.1.2 |
|
A unique identity for the current config. Internal use.
|
SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.8708.2.71.2.5.1.1.3 |