LUM-SYSINFO-MIB

Recognized by Observium
        Contains information about CPU utilization, RAM memory etc.
    
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
Source file
LUM-SYSINFO-MIB
Last revised
Identity
lumSysinfoMIBModule
Base OID
1.3.6.1.4.1.8708.1.1.71
Imported Objects
LUM-REG lumModules lumSysinfoMIB
LUM-TC AdminStatus FaultStatus Integer32WithNA MgmtNameString Unsigned32WithNA
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-SYSINFO-MIB::lumSysinfoMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SYSINFO-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SYSINFO-MIB::lumSysinfoMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (53)
.1.3.6.1.4.1.8708.1.1.71
.1.3.6.1.4.1.8708.2.71.1
.1.3.6.1.4.1.8708.2.71.1.1
.1.3.6.1.4.1.8708.2.71.1.2
.1.3.6.1.4.1.8708.2.71.2
.1.3.6.1.4.1.8708.2.71.2.1
.1.3.6.1.4.1.8708.2.71.2.1.1
.1.3.6.1.4.1.8708.2.71.2.1.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.71.2.1.1.1.1
.1.3.6.1.4.1.8708.2.71.2.1.1.1.2
.1.3.6.1.4.1.8708.2.71.2.1.1.1.3
.1.3.6.1.4.1.8708.2.71.2.1.1.1.4
.1.3.6.1.4.1.8708.2.71.2.1.1.1.5
.1.3.6.1.4.1.8708.2.71.2.2
.1.3.6.1.4.1.8708.2.71.2.2.1
.1.3.6.1.4.1.8708.2.71.2.2.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.71.2.2.1.1.1
.1.3.6.1.4.1.8708.2.71.2.2.1.1.2
.1.3.6.1.4.1.8708.2.71.2.2.1.1.3
.1.3.6.1.4.1.8708.2.71.2.2.1.1.4
.1.3.6.1.4.1.8708.2.71.2.2.1.1.5
.1.3.6.1.4.1.8708.2.71.2.3
.1.3.6.1.4.1.8708.2.71.2.3.1
.1.3.6.1.4.1.8708.2.71.2.3.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.71.2.3.1.1.1
.1.3.6.1.4.1.8708.2.71.2.3.1.1.2
.1.3.6.1.4.1.8708.2.71.2.3.1.1.3
.1.3.6.1.4.1.8708.2.71.2.3.1.1.4
.1.3.6.1.4.1.8708.2.71.2.3.1.1.5
.1.3.6.1.4.1.8708.2.71.2.3.1.1.6
.1.3.6.1.4.1.8708.2.71.2.3.1.1.7
.1.3.6.1.4.1.8708.2.71.2.3.1.1.8
.1.3.6.1.4.1.8708.2.71.2.4
.1.3.6.1.4.1.8708.2.71.2.4.1
.1.3.6.1.4.1.8708.2.71.2.4.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.71.2.4.1.1.1
.1.3.6.1.4.1.8708.2.71.2.4.1.1.10
.1.3.6.1.4.1.8708.2.71.2.4.1.1.11
.1.3.6.1.4.1.8708.2.71.2.4.1.1.12
.1.3.6.1.4.1.8708.2.71.2.4.1.1.2
.1.3.6.1.4.1.8708.2.71.2.4.1.1.3
.1.3.6.1.4.1.8708.2.71.2.4.1.1.4
.1.3.6.1.4.1.8708.2.71.2.4.1.1.5
.1.3.6.1.4.1.8708.2.71.2.4.1.1.6
Enumeration
.1.3.6.1.4.1.8708.2.71.2.4.1.1.7
.1.3.6.1.4.1.8708.2.71.2.4.1.1.8
.1.3.6.1.4.1.8708.2.71.2.4.1.1.9
.1.3.6.1.4.1.8708.2.71.2.5
.1.3.6.1.4.1.8708.2.71.2.5.1
.1.3.6.1.4.1.8708.2.71.2.5.1.1
.1.3.6.1.4.1.8708.2.71.2.5.1.1.1
.1.3.6.1.4.1.8708.2.71.2.5.1.1.2
.1.3.6.1.4.1.8708.2.71.2.5.1.1.3
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. LUM-SYSINFO-MIBinfineraselected
Compliance Statements (2)

OID .1.3.6.1.4.1.8708.2.71.1.2.1
Basic implementation requirements for the SYSINFO MIB (XTM 31.0).
Required groups

OID .1.3.6.1.4.1.8708.2.71.1.2.2
Basic implementation requirements for the SYSINFO MIB (R35.0).
Required groups