sdhpdhE1t1VcIndex
LUM-SDHPDH-MIB ·
.1.3.6.1.4.1.8708.2.35.2.2.1.1.19
Object
column
SNMPv2-SMIUnsigned32
Shows what index corresponding VC3/VC4 has in clientVc4 table.
Context
- MIB
- LUM-SDHPDH-MIB
- OID
.1.3.6.1.4.1.8708.2.35.2.2.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sdhpdhE1t1Entry
- Table
- sdhpdhE1t1Table
- Siblings
- 21
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sdhpdhE1t1Index An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.1 |
| sdhpdhE1t1AlarmIndicationSignalC2W Alarm indication signal.
A: An 'all ones' signal is detected.
D: Signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.10 |
| sdhpdhE1t1LossOfFrameC2W Loss of frame.
All forms of sync loss. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.11 |
| sdhpdhE1t1LossOfFrameW2C Loss of frame.
All forms of sync loss. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.12 |
| sdhpdhE1t1UnEquipped Shows whether the E1T1 has payload or not.
A: No payload.
D: Has payload | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.13 |
| sdhpdhE1t1ConnectionStatus Shows the name of the wdm port and
possible subchannel that it is connected to
or Unconnected if not connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.35.2.2.1.1.14 |
| sdhpdhE1t1SubChannelId Channel number.
For E1: according to MLK (ITU-T G.707 Figure 7-27)
For T1: TBD. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.15 |
| sdhpdhE1t1MultiplexingInformation Channels are numbered 1.1.1, 2.1.1, 3.1.1, 1.2.1, ....
The digits are called K, L and M: K.L.M
SDH/E1
======
Refer to G.707 7.3
K = TUG3 number
… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.35.2.2.1.1.16 |
| sdhpdhE1t1RxSignalStatus The operational state for incoming (RX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.35.2.2.1.1.17 |
| sdhpdhE1t1TxSignalStatus The operational state for outgoing (TX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.35.2.2.1.1.18 |
| sdhpdhE1t1Name The name of the object, for example
'e1t1:1:2:1-2:1', where the numbers indicate the
subrack, slot, port numbers and e1t1 index. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.35.2.2.1.1.2 |
| sdhpdhE1t1ClockDomain Shows the origin of the clock received from
the hub. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.35.2.2.1.1.20 |
| sdhpdhE1t1TuAlarmIndicationSignalC2W Alarm indication signal.
A: An 'all ones' signal is detected.
D: Signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.21 |
| sdhpdhE1t1TuLossOfPointerC2W Loss of pointer.
All forms of sync loss. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.22 |
| sdhpdhE1t1FrameFormat Select the frame format for T1 signals
esf - Extended Super Frame (ESF) is a T1 framing standard,
sometimes called D5 framing. It is preferred to its
pr… | column | Enumeration | .1.3.6.1.4.1.8708.2.35.2.2.1.1.23 |
| sdhpdhE1t1EquipmentIndex Shows what index corresponding
equipment has in equipment table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.24 |
| sdhpdhE1t1SignalLabel Shows synchronous status of the
incoming signal. | column | Enumeration | .1.3.6.1.4.1.8708.2.35.2.2.1.1.25 |
| sdhpdhE1t1Descr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.35.2.2.1.1.6 |
| sdhpdhE1t1AdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The object is activated but alarms
are suppressed. Int… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.7 |
| sdhpdhE1t1OperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is de-activated or there are
faults preven… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.8 |
| sdhpdhE1t1AlarmIndicationSignalW2C Alarm indication signal.
A: An 'all ones' signal is detected.
D: Signal recovered. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.35.2.2.1.1.9 |