LUM-SDHPDH-MIB

        The SDHPDH interface and protection group MIB.
        
- General
        
- E1T1 interfaces
    
Source file
LUM-SDHPDH-MIB
Last revised
Identity
lumSdhpdhMIBModule
Base OID
1.3.6.1.4.1.8708.1.1.35
Imported Objects
LUM-REG lumModules lumSdhpdhMIB
LUM-TC BoardOrInterfaceAdminStatus BoardOrInterfaceOperStatus CommandString FaultStatus MgmtNameString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-SDHPDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-SDHPDH-MIB::lumSdhpdhMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SDHPDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SDHPDH-MIB::lumSdhpdhMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (42)
.1.3.6.1.4.1.8708.1.1.35
.1.3.6.1.4.1.8708.2.35.1
.1.3.6.1.4.1.8708.2.35.1.1
.1.3.6.1.4.1.8708.2.35.1.2
.1.3.6.1.4.1.8708.2.35.2
.1.3.6.1.4.1.8708.2.35.2.1
.1.3.6.1.4.1.8708.2.35.2.1.1
.1.3.6.1.4.1.8708.2.35.2.1.2
.1.3.6.1.4.1.8708.2.35.2.1.3
.1.3.6.1.4.1.8708.2.35.2.1.4
.1.3.6.1.4.1.8708.2.35.2.2
.1.3.6.1.4.1.8708.2.35.2.2.1
.1.3.6.1.4.1.8708.2.35.2.2.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.35.2.2.1.1.1
.1.3.6.1.4.1.8708.2.35.2.2.1.1.10
.1.3.6.1.4.1.8708.2.35.2.2.1.1.11
.1.3.6.1.4.1.8708.2.35.2.2.1.1.12
.1.3.6.1.4.1.8708.2.35.2.2.1.1.13
.1.3.6.1.4.1.8708.2.35.2.2.1.1.14
.1.3.6.1.4.1.8708.2.35.2.2.1.1.15
.1.3.6.1.4.1.8708.2.35.2.2.1.1.16
Enumeration
.1.3.6.1.4.1.8708.2.35.2.2.1.1.17
Enumeration
.1.3.6.1.4.1.8708.2.35.2.2.1.1.18
.1.3.6.1.4.1.8708.2.35.2.2.1.1.19
.1.3.6.1.4.1.8708.2.35.2.2.1.1.2
.1.3.6.1.4.1.8708.2.35.2.2.1.1.20
.1.3.6.1.4.1.8708.2.35.2.2.1.1.21
.1.3.6.1.4.1.8708.2.35.2.2.1.1.22
Enumeration
.1.3.6.1.4.1.8708.2.35.2.2.1.1.23
.1.3.6.1.4.1.8708.2.35.2.2.1.1.24
Enumeration
.1.3.6.1.4.1.8708.2.35.2.2.1.1.25
.1.3.6.1.4.1.8708.2.35.2.2.1.1.6
.1.3.6.1.4.1.8708.2.35.2.2.1.1.7
.1.3.6.1.4.1.8708.2.35.2.2.1.1.8
.1.3.6.1.4.1.8708.2.35.2.2.1.1.9
.1.3.6.1.4.1.8708.2.35.2.3
.1.3.6.1.4.1.8708.2.35.2.3.1
.1.3.6.1.4.1.8708.2.35.2.3.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.35.2.3.1.1.1
.1.3.6.1.4.1.8708.2.35.2.3.1.1.2
Enumeration
.1.3.6.1.4.1.8708.2.35.2.3.1.1.3
.1.3.6.1.4.1.8708.2.35.2.3.1.1.4
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. LUM-SDHPDH-MIBinfineraselected
Conformance Groups (4)
The general objects.
.1.3.6.1.4.1.8708.2.35.1.1.1
The SDHPDH E1T1 objects. (15.0)
.1.3.6.1.4.1.8708.2.35.1.1.2
The SDHPDH Equipment objects. (16.0)
.1.3.6.1.4.1.8708.2.35.1.1.3
The SDHPDH E1T1 objects. (17.0)
.1.3.6.1.4.1.8708.2.35.1.1.4
Compliance Statements (2)

OID .1.3.6.1.4.1.8708.2.35.1.2.1
Basic implementation requirements for the SDHPDH MIB V1. (15.0)
Required groups

OID .1.3.6.1.4.1.8708.2.35.1.2.2
Basic implementation requirements for the SDHPDH MIB V2. (16.0)
Required groups