LUM-SDHPDH-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
26
sdhpdhE1t1Table
table.1.3.6.1.4.1.8708.2.35.2.2.1
·
1 row entry
·
22 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sdhpdhE1t1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SDHPDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SDHPDH-MIB::sdhpdhE1t1Table'
The SDHPDH table.
An entry in the SDHPDH table.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| sdhpdhE1t1IndexAn arbitrary index assigned to each entry. | Unsigned32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.1 | ||||||||||||||||
| sdhpdhE1t1NameThe name of the object, for example 'e1t1:1:2:1-2:1', where the numbers indicate the subrack, slot, port numbers and e1t1 index. | LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. | .1.3.6.1.4.1.8708.2.35.2.2.1.1.2 | ||||||||||||||||
| sdhpdhE1t1DescrUser configurable label. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.35.2.2.1.1.6 | ||||||||||||||||
| sdhpdhE1t1AdminStatusThe administrative state for the interface. down - The interface should be inactive. service - The object is activated but alarms are suppressed. Intended for use during service or re-confi… | LUM-TCBoardOrInterfaceAdminStatusr/w Type Values:
Description: The administrative state for a board or interface. down - The board/interface should be inactive. service - The board/interface is activated but alarms are suppressed. Intended for use during servi… | .1.3.6.1.4.1.8708.2.35.2.2.1.1.7 | ||||||||||||||||
| sdhpdhE1t1OperStatusThe operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing it from going to the 'up'-state. … | LUM-TCBoardOrInterfaceOperStatus Type Values:
Description: The operational state for a board or interface. notPresent - The board/interface is not available. down - The board/interface is de-activated or there are faults preventing it from going to the 'up… | .1.3.6.1.4.1.8708.2.35.2.2.1.1.8 | ||||||||||||||||
| sdhpdhE1t1AlarmIndicationSignalW2CAlarm indication signal. A: An 'all ones' signal is detected. D: Signal recovered. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.9 | ||||||||||||||||
| sdhpdhE1t1AlarmIndicationSignalC2WAlarm indication signal. A: An 'all ones' signal is detected. D: Signal recovered. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.10 | ||||||||||||||||
| sdhpdhE1t1LossOfFrameC2WLoss of frame. All forms of sync loss. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.11 | ||||||||||||||||
| sdhpdhE1t1LossOfFrameW2CLoss of frame. All forms of sync loss. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.12 | ||||||||||||||||
| sdhpdhE1t1UnEquippedShows whether the E1T1 has payload or not. A: No payload. D: Has payload | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.13 | ||||||||||||||||
| sdhpdhE1t1ConnectionStatusShows the name of the wdm port and possible subchannel that it is connected to or Unconnected if not connected. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.35.2.2.1.1.14 | ||||||||||||||||
| sdhpdhE1t1SubChannelIdChannel number. For E1: according to MLK (ITU-T G.707 Figure 7-27) For T1: TBD. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.15 | ||||||||||||||||
| sdhpdhE1t1MultiplexingInformationChannels are numbered 1.1.1, 2.1.1, 3.1.1, 1.2.1, .... The digits are called K, L and M: K.L.M SDH/E1 ====== Refer to G.707 7.3 K = TUG3 number L = TUG2 number M = TU-1 number … | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.35.2.2.1.1.16 | ||||||||||||||||
| sdhpdhE1t1RxSignalStatusThe operational state for incoming (RX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.8708.2.35.2.2.1.1.17 | ||||||||||||||||
| sdhpdhE1t1TxSignalStatusThe operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The signal quality is impaired. … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.8708.2.35.2.2.1.1.18 | ||||||||||||||||
| sdhpdhE1t1VcIndexShows what index corresponding VC3/VC4 has in clientVc4 table. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.19 | ||||||||||||||||
| sdhpdhE1t1ClockDomainShows the origin of the clock received from the hub. | SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.35.2.2.1.1.20 | ||||||||||||||||
| sdhpdhE1t1TuAlarmIndicationSignalC2WAlarm indication signal. A: An 'all ones' signal is detected. D: Signal recovered. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.21 | ||||||||||||||||
| sdhpdhE1t1TuLossOfPointerC2WLoss of pointer. All forms of sync loss. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.35.2.2.1.1.22 | ||||||||||||||||
| sdhpdhE1t1FrameFormatSelect the frame format for T1 signals esf - Extended Super Frame (ESF) is a T1 framing standard, sometimes called D5 framing. It is preferred to its predecessor, Super Frame, because it inclu… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.8708.2.35.2.2.1.1.23 | ||||||||||||||||
| sdhpdhE1t1EquipmentIndexShows what index corresponding equipment has in equipment table. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.8708.2.35.2.2.1.1.24 | ||||||||||||||||
| sdhpdhE1t1SignalLabelShows synchronous status of the incoming signal. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.8708.2.35.2.2.1.1.25 |
sdhpdhEquipmentTable
table.1.3.6.1.4.1.8708.2.35.2.3.1
·
1 row entry
·
4 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk sdhpdhEquipmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-SDHPDH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-SDHPDH-MIB::sdhpdhEquipmentTable'
The SDHPDH table.
An entry in the SDHPDH table.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| sdhpdhEquipmentIndexAn arbitrary index assigned to each entry. | Unsigned32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.8708.2.35.2.3.1.1.1 | ||||
| sdhpdhEquipmentNameThe management name of the interface, for example 'sdhpdheq:1:2:1' (sdhpdheq:[subrack]:[slot]). | LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. | .1.3.6.1.4.1.8708.2.35.2.3.1.1.2 | ||||
| sdhpdhEquipmentMultiplexingStructureChoose if vc3 or vc4 is used | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.8708.2.35.2.3.1.1.3 | ||||
| sdhpdhEquipmentChangeMultiplexStructureCommandCommand to change the multiplexing structure | LUM-TCCommandString Description: tbd | .1.3.6.1.4.1.8708.2.35.2.3.1.1.4 |