psrMplsLinearProtLocalEvent

LUM-PSR-MIB · .1.3.6.1.4.1.8708.2.43.2.2.1.1.7

Object

column InputRequest

The input request that is triggered locally.
unknown (1)
    -- no board present
noRequest (2)
    -- none of the input sources have generated any input locally
lockOut (3)
    -- the operator requested to prevent switching data traffic
       to the protection path, for any purpose
forcedSwitch (4)
    -- the operator requested that traffic be switched from working path
       to the protection path
signalFailpPath (5)
    -- a failure condition is signaled on the protection path
signalFailwPath (6)
    -- a failure condition is signaled on the working path
manualSwitch (7)
    -- the operator requested that traffic be switched from the working
       path to the protection path, only relevant if there is no currently
       active fault condition or operator command
waitToRestore (8)
    -- the remote end point has determined that the failure condition has
       recovered and has started its WTR timer in preparation for
       reverting to the normal state
doNotRevert (9)
    -- the remote end point has determined that the failure condition has
       recovered and will continue transporting traffic on the protection
       path due to operator configuration that prevents automatic
       reversion to the normal state

Context

MIB: LUM-PSR-MIB
OID: .1.3.6.1.4.1.8708.2.43.2.2.1.1.7
Type: column
Access: readonly
Status: current
Parent: psrMplsLinearProtEntry
Table: psrMplsLinearProtTable
Siblings: 22

Syntax

InputRequest

Source: InputRequest
Base type: Enumeration

Values & Constraints

Type Values

`1`	unknown
`2`	noRequest
`3`	lockOut
`4`	forcedSwitch
`5`	signalFailProtecting
`6`	signalFailWorking
`7`	manualSwitch
`8`	waitToRestore
`9`	doNotRevert
`10`	noConnection

Related Objects

Sibling Objects

Object	Type	Syntax	OID
psrMplsLinearProtIndex An arbitrary index assigned to each entry.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.1`
psrMplsLinearProtWorkingPathIndex The index of the working path.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.10`
psrMplsLinearProtWorkingPathState The status of the working path. down (1) -- signal fail condition is reported up (2) -- no abnormal condition unknown (3) -- no board present	column	PathState	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.11`
psrMplsLinearProtWpathSupvType Supervision type of the working/protection path in protection domain. layer1(1) -- the path state depends only on layer1 faults on the local port. bfd (2) -- the pa…	column	SupvType	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.12`
psrMplsLinearProtProtectionPathId Identifier of the protection path.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.13`
psrMplsLinearProtProtectionPathIndex The index of the protection path.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.14`
psrMplsLinearProtProtectionPathState The state of the protection path. down (1) -- signal fail condition is reported up (2) -- no abnormal condition unknown (3) -- no board present	column	PathState	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.15`
psrMplsLinearProtPpathSupvType Supervision type of the working/protection path in protection domain. layer1(1) -- the path state depends only on layer1 faults on the local port. bfd (2) -- the pa…	column	SupvType	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.16`
psrMplsLinearProtActivePath Indicates which path is transporting the traffic. workingPath (1) -- the data traffic is transported on working path protectionPath (2) -- the data traffic is transported …	column	Enumeration	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.17`
psrMplsLinearProtOperatorCommand The operator command. Operator command may not be executed because an equal or higher priority local/remote event is in effect. noRequest (1) -- cancel an active local administ…	column	Enumeration	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.18`
psrMplsLinearProtHoldoffTimer Hold-off timer coordinates timing of protection switches. When a signal fail event occurs, this event should not be reported before the hold-off timer has elapsed. Unit: milliseco…	column	Unsigned32	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.19`
psrMplsLinearProtInternalReference For internal use only.	column	Unsigned32	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.2`
psrMplsLinearProtProtectionFailed Failure detected on all available paths in tunnel.	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.20`
psrMplsLinearProtProtectionDegraded Failure detected on working path or protection path, or traffic is locked to one path.	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.21`
psrMplsLinearProtCommunicationFailure No connection with far-end LER.	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.22`
psrMplsLinearProtConfigMismatch Configuration of protection mode mismatch between local and far-end LER.	column	LUM-TCFaultStatus	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.23`
psrMplsLinearProtName The management name of the interface, for example 'linPrt:1:2:tunnelId', where the first number indicates subrack, the second slot number, and the third is the tunnel Id, to which…	column	LUM-TCMgmtNameString	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.3`
psrMplsLinearProtTunnelId The tunnel that this protection is applied to.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.4`
psrMplsLinearProtAdminStatus The administrative state for the object. down - The object is de-activated. up - The object will be activated when available.	column	Enumeration	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.5`
psrMplsLinearProtState The state of the protection domain. normal (1) -- both the protection and working paths are fully allocated and active protectionPathUnavailabe (2) -…	column	Enumeration	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.6`
psrMplsLinearProtRemoteEvent The last received remote request. unknown (1) -- no board present noRequest (2) -- the remote end point has no abnormal condition to report lockOut (3) -- the remote e…	column	InputRequest	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.8`
psrMplsLinearProtWorkingPathId Identifier of the working path.	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.8708.2.43.2.2.1.1.9`