LUM-PSR-MIB

        The MIB module for management of MPLS-TP protection switching
and recovery(PSR).
        
The tables contained in this MIB are:
        
(1) The General group contains some general attributes as timestamps
    and tables sizes.
        
(2) The MPLS linear protection table contains information and
    configuration about Protection State Coordination (PSC) protocol
    used in linear protection switching of MPLS LSPs and Pseudowires.
    
Source file
LUM-PSR-MIB
Last revised
Identity
lumPsrMIBModule
Base OID
1.3.6.1.4.1.8708.1.1.43
Imported Objects
LUM-REG lumModules lumPsrMIB
LUM-TC FaultStatus MgmtNameString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DateAndTime DisplayString TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the infinera MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-PSR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-PSR-MIB::lumPsrMIBModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PSR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PSR-MIB::lumPsrMIBModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (35)
.1.3.6.1.4.1.8708.1.1.43
.1.3.6.1.4.1.8708.2.43.1
.1.3.6.1.4.1.8708.2.43.1.1
.1.3.6.1.4.1.8708.2.43.1.2
.1.3.6.1.4.1.8708.2.43.2
.1.3.6.1.4.1.8708.2.43.2.1
.1.3.6.1.4.1.8708.2.43.2.1.1
.1.3.6.1.4.1.8708.2.43.2.1.2
.1.3.6.1.4.1.8708.2.43.2.1.9
.1.3.6.1.4.1.8708.2.43.2.2
.1.3.6.1.4.1.8708.2.43.2.2.1
.1.3.6.1.4.1.8708.2.43.2.2.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.43.2.2.1.1.1
Unsigned32
.1.3.6.1.4.1.8708.2.43.2.2.1.1.10
.1.3.6.1.4.1.8708.2.43.2.2.1.1.11
.1.3.6.1.4.1.8708.2.43.2.2.1.1.12
.1.3.6.1.4.1.8708.2.43.2.2.1.1.13
Unsigned32
.1.3.6.1.4.1.8708.2.43.2.2.1.1.14
.1.3.6.1.4.1.8708.2.43.2.2.1.1.15
.1.3.6.1.4.1.8708.2.43.2.2.1.1.16
Enumeration
.1.3.6.1.4.1.8708.2.43.2.2.1.1.17
Enumeration
.1.3.6.1.4.1.8708.2.43.2.2.1.1.18
Unsigned32
.1.3.6.1.4.1.8708.2.43.2.2.1.1.19
Unsigned32
.1.3.6.1.4.1.8708.2.43.2.2.1.1.2
.1.3.6.1.4.1.8708.2.43.2.2.1.1.20
.1.3.6.1.4.1.8708.2.43.2.2.1.1.21
.1.3.6.1.4.1.8708.2.43.2.2.1.1.22
.1.3.6.1.4.1.8708.2.43.2.2.1.1.23
.1.3.6.1.4.1.8708.2.43.2.2.1.1.3
.1.3.6.1.4.1.8708.2.43.2.2.1.1.4
Enumeration
.1.3.6.1.4.1.8708.2.43.2.2.1.1.5
Enumeration
.1.3.6.1.4.1.8708.2.43.2.2.1.1.6
.1.3.6.1.4.1.8708.2.43.2.2.1.1.7
.1.3.6.1.4.1.8708.2.43.2.2.1.1.8
.1.3.6.1.4.1.8708.2.43.2.2.1.1.9
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. LUM-REGinfinera
  3. SNMPv2-TCrfc
  4. LUM-TCinfinera
  5. SNMPv2-CONFrfc
  6. LUM-PSR-MIBinfineraselected
Type Definitions (3)
Enumeration
unknown(1)
noRequest(2)
lockOut(3)
forcedSwitch(4)
signalFailProtecting(5)
signalFailWorking(6)
manualSwitch(7)
waitToRestore(8)
doNotRevert(9)
noConnection(10)
Enumeration
down(1)
up(2)
unknown(3)
Enumeration
layer1(1)
bfd(2)
Compliance Statements (1)

OID .1.3.6.1.4.1.8708.2.43.1.2.1
Basic implementation requirements for the PSR MIB. (R19.0)
Required groups