LUM-PSR-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
23
psrMplsLinearProtTable
table.1.3.6.1.4.1.8708.2.43.2.2.1
·
1 row entry
·
23 columns
Uses the infinera variant from
Command help
/opt/observium/mibs/infinera.
Walk psrMplsLinearProtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PSR-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PSR-MIB::psrMplsLinearProtTable'
The MPLS linear protection group list.
An entry in the MPLS linear protection list.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| psrMplsLinearProtIndexAn arbitrary index assigned to each entry. | Unsigned32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.8708.2.43.2.2.1.1.1 | ||||||||||||||||||||
| psrMplsLinearProtInternalReferenceFor internal use only. | Unsigned32r/w Constraints: range: 0-2147483647 | .1.3.6.1.4.1.8708.2.43.2.2.1.1.2 | ||||||||||||||||||||
| psrMplsLinearProtNameThe management name of the interface, for example 'linPrt:1:2:tunnelId', where the first number indicates subrack, the second slot number, and the third is the tunnel Id, to which the linear protection is applied. | LUM-TCMgmtNameString Type Constraints: range: 0..255Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB. | .1.3.6.1.4.1.8708.2.43.2.2.1.1.3 | ||||||||||||||||||||
| psrMplsLinearProtTunnelIdThe tunnel that this protection is applied to. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.43.2.2.1.1.4 | ||||||||||||||||||||
| psrMplsLinearProtAdminStatusThe administrative state for the object. down - The object is de-activated. up - The object will be activated when available. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.5 | ||||||||||||||||||||
| psrMplsLinearProtStateThe state of the protection domain. normal (1) -- both the protection and working paths are fully allocated and active protectionPathUnavailabe (2) -- the protection path is unavailable wor… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.6 | ||||||||||||||||||||
| psrMplsLinearProtLocalEventThe input request that is triggered locally. unknown (1) -- no board present noRequest (2) -- none of the input sources have generated any input locally lockOut (3) -- the operator requested to prevent switc… | InputRequest Type Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.7 | ||||||||||||||||||||
| psrMplsLinearProtRemoteEventThe last received remote request. unknown (1) -- no board present noRequest (2) -- the remote end point has no abnormal condition to report lockOut (3) -- the remote end point is in unavailable state due to … | InputRequest Type Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.8 | ||||||||||||||||||||
| psrMplsLinearProtWorkingPathIdIdentifier of the working path. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.43.2.2.1.1.9 | ||||||||||||||||||||
| psrMplsLinearProtWorkingPathIndexThe index of the working path. | Unsigned32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.8708.2.43.2.2.1.1.10 | ||||||||||||||||||||
| psrMplsLinearProtWorkingPathStateThe status of the working path. down (1) -- signal fail condition is reported up (2) -- no abnormal condition unknown (3) -- no board present | PathState Type Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.11 | ||||||||||||||||||||
| psrMplsLinearProtWpathSupvTypeSupervision type of the working/protection path in protection domain. layer1(1) -- the path state depends only on layer1 faults on the local port. bfd (2) -- the path is monitored by BFD session. | SupvType Type Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.12 | ||||||||||||||||||||
| psrMplsLinearProtProtectionPathIdIdentifier of the protection path. | SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… | .1.3.6.1.4.1.8708.2.43.2.2.1.1.13 | ||||||||||||||||||||
| psrMplsLinearProtProtectionPathIndexThe index of the protection path. | Unsigned32 Constraints: range: 1-2147483647 | .1.3.6.1.4.1.8708.2.43.2.2.1.1.14 | ||||||||||||||||||||
| psrMplsLinearProtProtectionPathStateThe state of the protection path. down (1) -- signal fail condition is reported up (2) -- no abnormal condition unknown (3) -- no board present | PathState Type Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.15 | ||||||||||||||||||||
| psrMplsLinearProtPpathSupvTypeSupervision type of the working/protection path in protection domain. layer1(1) -- the path state depends only on layer1 faults on the local port. bfd (2) -- the path is monitored by BFD session. | SupvType Type Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.16 | ||||||||||||||||||||
| psrMplsLinearProtActivePathIndicates which path is transporting the traffic. workingPath (1) -- the data traffic is transported on working path protectionPath (2) -- the data traffic is transported on protection path none (3) -- the d… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.17 | ||||||||||||||||||||
| psrMplsLinearProtOperatorCommandThe operator command. Operator command may not be executed because an equal or higher priority local/remote event is in effect. noRequest (1) -- cancel an active local administrative command and send no request lockO… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.8708.2.43.2.2.1.1.18 | ||||||||||||||||||||
| psrMplsLinearProtHoldoffTimerHold-off timer coordinates timing of protection switches. When a signal fail event occurs, this event should not be reported before the hold-off timer has elapsed. Unit: milliseconds. | Unsigned32r/w Constraints: range: 0-10000 | .1.3.6.1.4.1.8708.2.43.2.2.1.1.19 | ||||||||||||||||||||
| psrMplsLinearProtProtectionFailedFailure detected on all available paths in tunnel. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.43.2.2.1.1.20 | ||||||||||||||||||||
| psrMplsLinearProtProtectionDegradedFailure detected on working path or protection path, or traffic is locked to one path. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.43.2.2.1.1.21 | ||||||||||||||||||||
| psrMplsLinearProtCommunicationFailureNo connection with far-end LER. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.43.2.2.1.1.22 | ||||||||||||||||||||
| psrMplsLinearProtConfigMismatchConfiguration of protection mode mismatch between local and far-end LER. | LUM-TCFaultStatus Type Values:
Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. … | .1.3.6.1.4.1.8708.2.43.2.2.1.1.23 |