lecMulticastSendPeakRate
LAN-EMULATION-CLIENT-MIB ·
.1.3.6.1.4.1.353.5.3.1.1.1.1.22
Object
column
mandatory
r/w
Integer32
C26 Multicast Send VCC PeakRate. Signalling parameter that SHOULD be used by the LE Client when establishing the Multicast Send VCC. Forward and Backward Peak Cell Rate to be requested by LE Client when setting up the Multicast Send VCC when using either Variable or Constant bit rate codings.
Context
- MIB
- LAN-EMULATION-CLIENT-MIB
- OID
.1.3.6.1.4.1.353.5.3.1.1.1.1.22- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- lecConfigEntry
- Table
- lecConfigTable
- Siblings
- 35
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lecIndex A value which uniquely identifies this conceptual
row in the lecConfigTable.
If the conceptual row identified by this value of
lecIndex is recreated following an ag… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.1 |
| lecMaxUnknownFrameCount C10 Maximum Unknown Frame Count. See the description
of lecMaxUnknownFrameTime below. | column | frames Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.10 |
| lecMaxUnknownFrameTime C11 Maximum Unknown Frame Time. Within the period of
time defined by the Maximum Unknown Frame Time, a
LE Client will send no more than Maximum Unknown
Frame Count frames to the … | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.11 |
| lecVccTimeoutPeriod C12 VCC Time-out Period. A LE Client SHOULD release
any Data Direct VCC that it has not used to
transmit or receive any data frames for the
length of the VCC Time-out Period. Th… | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.12 |
| lecMaxRetryCount C13 Maximum Retry Count. A LE CLient MUST not retry
a LE_ARP_REQUEST for a given frame's LAN
destination more than Maximum Retry Count times,
after the first LE_ARP_REQUEST for t… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.13 |
| lecAgingTime C17 Aging Time. The maximum time that a LE Client
will maintain an entry in its LE_ARP cache in
the absence of a verification of that
relationship.
This time value… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.14 |
| lecForwardDelayTime C18 Forward Delay Time. The maximum time that a LE
Client will maintain an entry for a non-local MAC
address in its LE_ARP cache in the absence of a
verification of that relation… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.15 |
| lecExpectedArpResponseTime C20 Expected LE_ARP Response Time. The maximum time
that the LEC expects an LE_ARP_REQUEST/
LE_ARP_RESPONSE cycle to take. Used for retries
and verifies.
This tim… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.16 |
| lecFlushTimeOut C21 Flush Time-out. Time limit to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
been sent before taking recovery action.
This time value is ex… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.17 |
| lecPathSwitchingDelay C22 Path Switching Delay. The time since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. … | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.18 |
| lecLocalSegmentID C23 Local Segment ID. The segment ID of the emulated
LAN. This is only required for IEEE 802.5 clients
that are Source Routing bridges. | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.19 |
| lecRowStatus This object lets network managers create and delete
LAN Emulation Clients, on systems that support this
optional capability.
It does not control Joins and Terminati… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.353.5.3.1.1.1.1.2 |
| lecMulticastSendType C24 Multicast Send VCC Type. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
This is the method to be used by t… | column | Enumeration | .1.3.6.1.4.1.353.5.3.1.1.1.1.20 |
| lecMulticastSendAvgRate C25 Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Sustained … | column | cells per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.21 |
| lecConnectionCompleteTimer C28 Connection Complete Timer. Optional. In
Connection Establishment this is the time period
in which data or a READY_IND message is expected
from a Calling Party.
… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.23 |
| lecConfigLecsAtmAddress mandatory LE Configuration Server ATM address.
A manually-configured LECS address that this client
may use in its attempts at auto-configuration. | column | AtmLaneAddress | .1.3.6.1.4.1.353.5.3.1.1.1.1.24 |
| lecInitialControlTimeout mandatory C7i Initial Control Time-out.
In LANE V2.0, control time-out consists of an initial
time-out of C7i seconds, a retry multiplier (or
logarithmic back-off base) of C… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.25 |
| lecControlTimeoutMultiplier mandatory C7x Control Time-out Multiplier.
In LANE V2.0, control time-out consists of an initial
time-out of C7i seconds, a retry multiplier (or
logarithmic back-off base) o… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.26 |
| lecV2MaxUnknownFrameCount mandatory C10 Maximum Unknown Frame Count. See the description
of lecMaxUnknownFrameTime above.
This object may be used with both LANE V1.0 clients &
LANE V2.0 clients. For… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.27 |
| lecConfigLocalSegmentID mandatory C23c Local Segment ID (configured). The segment ID of
the emulated LAN. This is only required for IEEE
802.5 clients that are Source Routing bridges.
A setting wh… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.28 |
| lecConfigV2Capable mandatory C29c V2 Capable (configured).
A setting which this client will use the next time it
returns to the Initial State.
Indicates whether this client is s… | column | TruthValue | .1.3.6.1.4.1.353.5.3.1.1.1.1.29 |
| lecOwner The entity that configured this entry and is therefore
using the resources assigned to it. | column | OctetString | .1.3.6.1.4.1.353.5.3.1.1.1.1.3 |
| lecConfigSelectiveMulticast mandatory C32c Selective Multicast (configured).
A setting which this client will use the next time it
returns to the Initial State.
Indicates if this client … | column | TruthValue | .1.3.6.1.4.1.353.5.3.1.1.1.1.30 |
| lecForwardDisconnectTimeout mandatory C33 Forward Disconnect Time-out
If the LE Client detects that the BUS has had no
Multicast Forward VCCs to the LE Client for time
Forward Disconnect Time-out, the … | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.31 |
| lecConfigLLCMultiplexCapable mandatory C34c LLC Multiplex Capable (configured).
A setting which this client will use the next time it
returns to the Initial State.
Gives a network manager… | column | TruthValue | .1.3.6.1.4.1.353.5.3.1.1.1.1.32 |
| lecMinReconfigureDelay mandatory C37 Minimum Reconfigure Delay.
The minimum time that a LE client must wait before
retrying reconfiguration. This setting must be
less than or equal to lecMaxRecon… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.33 |
| lecMaxReconfigureDelay mandatory C38 Maximum Reconfigure Delay.
The maximum time that a LE client must wait before
retrying reconfiguration. This setting must be
greater than or equal to lecMinRe… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.34 |
| lecMaxBusConnectRetries mandatory C39 Maximum BUS Connect Retries.
The maximum number of times that a LE Client can try
to establish the Default Multicast Send VCC before
returning to the configura… | column | Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.35 |
| lecTokenRingExplorerExclude mandatory C40 Token Ring Explorer Frame Exclude.
This indicates whether or not the LE Client wishes to
receive Token Ring explorer frames other than those
directed to one of… | column | TruthValue | .1.3.6.1.4.1.353.5.3.1.1.1.1.36 |
| lecConfigMode Indicates whether this LAN Emulation Client should
auto-configure the next time it is (re)started.
In automatic(1) mode, a client uses a LAN Emulation
Configuration… | column | Enumeration | .1.3.6.1.4.1.353.5.3.1.1.1.1.4 |
| lecConfigLanType C2 LAN Type.
The data frame format which this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this param… | column | LecDataFrameFormat | .1.3.6.1.4.1.353.5.3.1.1.1.1.5 |
| lecConfigMaxDataFrameSize C3 Maximum Data Frame Size.
The maximum data frame size which this client will
use the next time it returns to the Initial State.
Auto-configuring c… | column | LecDataFrameSize | .1.3.6.1.4.1.353.5.3.1.1.1.1.6 |
| lecConfigLanName C5 ELAN Name.
The ELAN Name this client will use the next time it
returns to the Initial State.
Auto-configuring clients use this parameter in their… | column | OctetString | .1.3.6.1.4.1.353.5.3.1.1.1.1.7 |
| lecConfigLesAtmAddress C9 LE Server ATM Address.
The LAN Emulation Server which this client will use
the next time it is started in manual configuration
mode.
When lecConf… | column | AtmLaneAddress | .1.3.6.1.4.1.353.5.3.1.1.1.1.8 |
| lecControlTimeout C7 Control Time-out. Time out period used for
timing out most request/response control frame
interactions, as specified elsewhere [in the
LAN Emulation specification].
… | column | seconds Integer32 | .1.3.6.1.4.1.353.5.3.1.1.1.1.9 |