juniPppoeProfileSetMap

Juniper-PPPOE-PROFILE-MIB · .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2
MIB view Table view

Object

column r/w Juniper-TCJuniSetMap 
A bitmap representing which objects in this entry have been explicitly
configured.  See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
              
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
              
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
              
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
              
Once set, bits can only be cleared by explicitly configuring
JuniSetMap.

Context

MIB
Juniper-PPPOE-PROFILE-MIB
OID
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2
Type
column
Access
readwrite
Status
current
Parent
juniPppoeProfileEntry
Table
juniPppoeProfileTable
Siblings
12

Syntax

Juniper-TCJuniSetMap
Source
Juniper-TCJuniSetMap
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..8

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniPppoeProfileId
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.1
juniPppoeProfileServiceNameTableName
The PPPoE Service name table controls behavior of PADO control packets.
columnOctetString.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.10
juniPppoeProfilePadrRemoteCircuitIdCapture
The PPPoE major interface parameter PADR remote circuit id capture flag controls whether the remote circuit id string possibly contained in the PADR packet will be saved and used …
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.11
juniPppoeProfileMtu
The initial Maximum Transmit Unit (MTU) that the PPPoE major interface entity will advertise to the remote entity. If the value of this variable is 1 then the local…
columnInteger32.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.12
juniPppoeProfileMaxSessionOverride
Configure the action to be taken by PPPoE when RADIUS server returns the PPPoE max-session value: override Override the current PPPoE max-session value with the v…
columnEnumeration.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.13
juniPppoeProfileMaxNumSessions
The maximum number of PPPoE sessions (subinterfaces) that can be configured on the main PPPoE interface created using this profile. A value of zero indicates no bound is configur…
columnInteger32.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.3
juniPppoeProfileSubMotm
A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub- interface. A client may choose to display this message to…
columnOctetString.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.4
juniPppoeProfileSubUrl
A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can have several substit…
columnOctetString.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5
juniPppoeProfileDupProtect
Flag to control whether duplicate MAC addresses are allowed
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.6
juniPppoeProfileAcName
The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.
columnOctetString.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.7
juniPppoeProfilePadiFlag
The PPPoE major interface parameter PADI flag controls whether to always repsond to a PADI with a PADO regardless of the ability to create the session and allow the session establ…
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.8
juniPppoeProfilePacketTrace
The PPPoE major interface parameter packet tracing flag controls whether packet tracing is enable or not.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.9