Juniper-PPPOE-PROFILE-MIB
The point-to-point protocol over Ethernet (PPPoE) profile MIB for the
Juniper enterprise.
- Source file
Juniper-PPPOE-PROFILE-MIB- Last revised
- Identity
juniPppoeProfileMIB- Base OID
1.3.6.1.4.1.4874.2.2.46
Imported Objects
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable JuniSetMap |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DisplayString |
Net-SNMP examples using the junose MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'Juniper-PPPOE-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PPPOE-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileMIB'
Objects (21)
Showing 21 of 21 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4874.2.2.46 |
||
.1.3.6.1.4.1.4874.2.2.46.1 |
||
.1.3.6.1.4.1.4874.2.2.46.1.1 |
||
.1.3.6.1.4.1.4874.2.2.46.1.1.1 |
||
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1 |
||
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.10 |
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.11 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.12 |
|
|
Enumeration
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.13 |
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2 |
||
|
Integer32
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.3 |
|
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.4 |
|
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5 |
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.6 |
||
|
OctetString
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.7 |
|
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.8 |
||
.1.3.6.1.4.1.4874.2.2.46.1.1.1.1.9 |
||
.1.3.6.1.4.1.4874.2.2.46.4 |
||
.1.3.6.1.4.1.4874.2.2.46.4.1 |
||
.1.3.6.1.4.1.4874.2.2.46.4.2 |
Dependencies (6) 5 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- Juniper-UNI-SMIjunose
- Juniper-MIBsjunose
- SNMPv2-TCrfc
- Juniper-TCjunose
- SNMPv2-CONFrfc
- Juniper-PPPOE-PROFILE-MIBjunoseselected
Conformance Groups (7)
Compliance Statements (7)
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.1Obsolete compliance statement for entities which implement the Juniper
PPPoE Profile MIB. This statement became obsolete when the duplicate
MAC address indicator and AC-NAME tag were added.
PPPoE Profile MIB. This statement became obsolete when the duplicate
MAC address indicator and AC-NAME tag were added.
Required groups
| mandatory | juniPppoeProfileGroup |
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.2Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when PADI flag,
AC-name and packet trace objects were added.
PPPoE profile MIB. This statement became obsolete when PADI flag,
AC-name and packet trace objects were added.
Required groups
| mandatory | juniPppoeProfileGroup2 |
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.3Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when the service
name table was added.
PPPoE profile MIB. This statement became obsolete when the service
name table was added.
Required groups
| mandatory | juniPppoeProfileGroup3 |
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.4Obsolete compliance statement for entities which implement the Juniper
PPPoE profile MIB. This statement became obsolete when the remote
circuit id capture was added.
PPPoE profile MIB. This statement became obsolete when the remote
circuit id capture was added.
Required groups
| mandatory | juniPppoeProfileGroup4 |
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.5Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
MTU configuration.
PPPoE MIB. This statement became obsolete when support was added for
MTU configuration.
Required groups
| mandatory | juniPppoeProfileGroup5 |
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.6Obsolete compliance statement for entities which implement the Juniper
PPPoE MIB. This statement became obsolete when support was added for
juniPppoeProfileMaxSessionOverride.
PPPoE MIB. This statement became obsolete when support was added for
juniPppoeProfileMaxSessionOverride.
Required groups
| mandatory | juniPppoeProfileGroup6 |
OID
.1.3.6.1.4.1.4874.2.2.46.4.1.7The compliance statement for entities which implement the Juniper PPPoE
Profile MIB.
Profile MIB.
Required groups
| mandatory | juniPppoeProfileGroup7 |