Juniper-PPPOE-PROFILE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
13

juniPppoeProfileTable

table
.1.3.6.1.4.1.4874.2.2.46.1.1.1 · 1 row entry · 13 columns
Open in standard view
Uses the junose variant from /opt/observium/mibs/junose.
Command help
Walk juniPppoeProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Juniper-PPPOE-PROFILE-MIB' -M '/opt/observium/mibs/junose:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Juniper-PPPOE-PROFILE-MIB::juniPppoeProfileTable' 
This table contains profiles for configuring PPPoE interfaces/sessions.
          
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB.
juniPppoeProfileEntry row .1.3.6.1.4.1.4874.2.2.46.1.1.1.1
A profile describing configuration of a PPPoE interface and its
subinterfaces (sessions).
Indexes
Column Syntax OID
juniPppoeProfileId
The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.1
juniPppoeProfileSetMap
A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.

The INDEX object(s) and this object are excl…
Juniper-TCJuniSetMapr/w
Type Constraints:
range: 0..8
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.2
juniPppoeProfileMaxNumSessions
The maximum number of PPPoE sessions (subinterfaces) that can be
configured on the main PPPoE interface created using this profile. A
value of zero indicates no bound is configured.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.3
juniPppoeProfileSubMotm
A message to send via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub- interface. A client
may choose to display this message to the user.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.4
juniPppoeProfileSubUrl
A URL to be sent via a PADM on the sub-interface when this profile is
applied to the IP interface above this PPPoE sub-interface. The string
entered here can have several substitutions applied:
%D is replaced…
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.5
juniPppoeProfileDupProtect
Flag to control whether duplicate MAC addresses are allowed
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.6
juniPppoeProfileAcName
The name to use for the AC-NAME tag that is sent in any PADO that is
sent on this interface.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.7
juniPppoeProfilePadiFlag
The PPPoE major interface parameter PADI flag controls whether to
always repsond to a PADI with a PADO regardless of the ability to create
the session and allow the session establish phase to resolve it.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.8
juniPppoeProfilePacketTrace
The PPPoE major interface parameter packet tracing flag controls
whether packet tracing is enable or not.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.9
juniPppoeProfileServiceNameTableName
The PPPoE Service name table controls behavior of PADO control
packets.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.10
juniPppoeProfilePadrRemoteCircuitIdCapture
The PPPoE major interface parameter PADR remote circuit id capture flag
controls whether the remote circuit id string possibly contained
in the PADR packet will be saved and used by AAA to replace the NAS-PORT-ID
field.
Juniper-TCJuniEnabler/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.11
juniPppoeProfileMtu
The initial Maximum Transmit Unit (MTU) that the PPPoE major interface
entity will advertise to the remote entity.

If the value of this variable is 1 then the local PPPoE entity will
use an MTU value dete…
Integer32r/w
Constraints:
range: 1-2
range: 66-65535
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.12
juniPppoeProfileMaxSessionOverride
Configure the action to be taken by PPPoE when RADIUS server returns
the PPPoE max-session value:
override Override the current PPPoE max-session value with the
value returned by RADIUS server
Ignore …
Enumerationr/w
Enumerated Values:
1override
2ignore
 .1.3.6.1.4.1.4874.2.2.46.1.1.1.1.13