hwMplsOamEgrRevType
HUAWEI-MPLSOAM-MIB ·
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6
Object
column
r/w
Enumeration
When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP,the BDI is transferred through the reverse LSP. The type of reverse LSP can be private or shared. If private, then the reverse LSP can be used only when the only LSP in defect; If shared, the reverse LSP, which is shared between many forward LSPs that have the same source LSRs and sink LSRs. 0: invalid, when the reverse LSR does not exist; 1: private; 2: share.
Context
- MIB
- HUAWEI-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwMplsOamEgrEntry
- Table
- hwMplsOamEgrTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | invalid |
1 | private |
2 | share |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsOamEgrLspName The object indicates the name of static LSP at egress. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 |
| hwMplsOamEgrBDIFreq BDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding directio… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 |
| hwMplsOamEgrEnable Whether one LSP is enabled with OAM.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and use… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 |
| hwMplsOamEgrValid 1: stop detect;
2: start detect. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 |
| hwMplsOamEgrAvaState If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 |
| hwMplsOamEgrDefectType 0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, … | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 |
| hwMplsOamEgrRowStatus This variable is used to create, modify, and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 |
| hwMplsOamEgrLsrId The object indicates the Ingress LSR ID of the LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 |
| hwMplsOamEgrSessTunnId The object indicates the the Ingress session tunnel ID of the LSP.. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 |
| hwMplsOamEgrDetType 0: invalid, if auto-protocol, this detect type is invalid;
1: CV;
2: FFD. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 |
| hwMplsOamEgrDetFreq 0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: invalid;
8: 3ms. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 |
| hwMplsOamEgrRevTunnName The object indicates the name of a reverse tunnel. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7 |
| hwMplsOamEgrAutoEn If autoprotocol, then the egress can process extended FDI sent
by ingress.
0: disable;
1: enable;
Valid only for the egress configuration. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8 |
| hwMplsOamEgrAutoOvertime This time is set at the egress.
If the egress receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the egress does not receive an… | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 |