HUAWEI-MPLSOAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
101
.1.3.6.1.4.1.2011.5.12.7.1.1.2 · 1 row entry · 15 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsOamIgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsOamIgrTable'
This table specifies per-LSP MPLS OAM capability and 
associated information, such as IgrTunnName and IgrDetType.
hwMplsOamIgrEntry row .1.3.6.1.4.1.2011.5.12.7.1.1.2.1
An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at ingress.
Column Syntax OID
hwMplsOamIgrIndexThe interface index of the detected tunnel.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.1
hwMplsOamIgrTunnNameThe name of a tunnel.
For ingress, it means the tunnel name of the detected LSP.
For egress, it means the tunnel name of the reverse LSP.
OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.2
hwMplsOamIgrDetTypeThere are two types of OAM packets, CV and FFD.
The CV flow is generated at the source LSR of the LSP with
a nominal frequency of 1/s and terminated at the sink LSR of the LSP.
FFD provides failure detection option for …
Enumerationr/w
Enumerated Values:
1cv
2ffd
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.3
hwMplsOamIgrDetFreqFor CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50…
Enumerationr/w
Enumerated Values:
0cv1000ms
1ffd10ms2
2ffd20ms3
3ffd50ms4
4ffd100ms5
5ffd200ms6
6ffd500ms7
7ffd3ms8
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.4
hwMplsOamIgrRevTypeWhen an LSP is found to be in defect, the sink LSR if the LSP
should send BDI to inform the source LSR of the LSP, the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If pr…
Enumerationr/w
Enumerated Values:
1private
2share
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.5
hwMplsOamIgrRevLspNameThe object indicates name of the reverse LSP.OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.6
hwMplsOamIgrRevLsrIdOnly for ingress, the object indicates the ingress LSR ID of the
reverse LSP,, expressed in IP address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.7
hwMplsOamIgrRevSessTunnIdOnly for ingress, the object indicates the session tunnel ID of
the reverse LSP.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.8
hwMplsOamIgrEnableWhether one LSP is OAM enable.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP,and user can set
other configuration.
0: The OAM func…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.9
hwMplsOamIgrValid0: stop detect;
1: start detect.
Enumeration
Enumerated Values:
0stop
1start
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.10
hwMplsOamIgrAvaStateIf the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP re-enters the Available state after the…
Enumeration
Enumerated Values:
0available
1unavailable
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.11
hwMplsOamIgrDefectTypeDefect is defined as interruption of the capability of a
transport entity (e.g., network connection) to transfer user
or OAM information. There are six types of defect:
0: no defect;
1: dServer;
2: dPeerMe;
3: dLOCV, …
Enumeration
Enumerated Values:
0nondefect
1dServer
2dPeerMe
3dLOCV
4dTTSIMismatch
5dTTSIMismerge
6dExcess
7dUnknown
8dOamFail
9dIngressDown
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.12
hwMplsOamIgrRowStatusThis variable is used to create, modify, and
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.13
hwMplsOamIgrCompatibilityMode1: PtnMode;
2: RouterMode;
Valid only for the ingress configuration.
Enumerationr/w
Enumerated Values:
1ptnMode
2routerMode
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.14
hwMplsOamIgrBDIFreqBDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding direction.
The frequency of BDI can be set by u…
Enumerationr/w
Enumerated Values:
1perSecond
2detectFrequency
.1.3.6.1.4.1.2011.5.12.7.1.1.2.1.15
.1.3.6.1.4.1.2011.5.12.7.1.1.3 · 1 row entry · 15 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsOamEgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsOamEgrTable'
This table specifies per-LSP MPLS OAM capability and 
associated information, such as DetectType, DetectFrequency.
hwMplsOamEgrEntry row .1.3.6.1.4.1.2011.5.12.7.1.1.3.1
An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at egress.
Column Syntax OID
hwMplsOamEgrLspNameThe object indicates the name of static LSP at egress.OctetString.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1
hwMplsOamEgrLsrIdThe object indicates the Ingress LSR ID of the LSP.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2
hwMplsOamEgrSessTunnIdThe object indicates the the Ingress session tunnel ID of the LSP..Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3
hwMplsOamEgrDetType0: invalid, if auto-protocol, this detect type is invalid;
1: CV;
2: FFD.
Enumerationr/w
Enumerated Values:
0invalid
1cv
2ffd
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4
hwMplsOamEgrDetFreq0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: invalid;
8: 3ms.
Enumerationr/w
Enumerated Values:
0cv1000ms
1ffd10ms2
2ffd20ms3
3ffd50ms4
4ffd100ms5
5ffd200ms6
6ffd500ms7
7invalid8
8ffd3ms9
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5
hwMplsOamEgrRevTypeWhen an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP,the BDI is
transferred through the reverse LSP.
The type of reverse LSP can be private or shared.
If pr…
Enumerationr/w
Enumerated Values:
0invalid
1private
2share
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6
hwMplsOamEgrRevTunnNameThe object indicates the name of a reverse tunnel.OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7
hwMplsOamEgrAutoEnIf autoprotocol, then the egress can process extended FDI sent
by ingress.
0: disable;
1: enable;
Valid only for the egress configuration.
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8
hwMplsOamEgrAutoOvertimeThis time is set at the egress.
If the egress receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the egress does not receive any OAM packet before the timer
expires, t…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9
hwMplsOamEgrBDIFreqBDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding direction.
The frequency of BDI can be set by u…
Enumerationr/w
Enumerated Values:
0perSecond
1detectFrequency
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10
hwMplsOamEgrEnableWhether one LSP is enabled with OAM.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and user can set
other configuration.
0: The O…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11
hwMplsOamEgrValid1: stop detect;
2: start detect.
Enumeration
Enumerated Values:
1stop
2start
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12
hwMplsOamEgrAvaStateIf the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP re-enters the Available state after the…
Enumeration
Enumerated Values:
0available
1unavailable
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13
hwMplsOamEgrDefectType0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mism…
Enumeration
Enumerated Values:
0nondefect
1dServer
2dPeerMe
3dLOCV
4dTTSIMismatch
5dTTSIMismerge
6dExcess
7dUnknown
8dOamFail
9dEgressDown
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14
hwMplsOamEgrRowStatusThis variable is used to create, modify, and
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15
.1.3.6.1.4.1.2011.5.12.7.1.1.4 · 1 row entry · 7 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsOamRlsnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsOamRlsnTable'
This table specifies RLSN capability and 
associated information, such as RlsnLsrId and RlsnLsrId.
hwMplsOamRlsnEntry row .1.3.6.1.4.1.2011.5.12.7.1.1.4.1
An entry in this table is created by an LSR to binding the name, lsr-id and tunnel-id of the LSP at egress.
Column Syntax OID
hwMplsOamRlsnLspNameFor egress, the object indicates name of the LSP.OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.1
hwMplsOamRlsnLsrIdFor egress, the object indicates the Ingress LSR ID of the LSPSNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.2
hwMplsOamRlsnSessTunnIdFor egress, the object indicates the Ingress session tunnel ID
of the LSP
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.3
hwMplsOamRlsnIfIndexThe object indicates the index of outbound interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.4
hwMplsOamRlsnIfNameThe object indicates the name of outbound interface.OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.5
hwMplsOamRlsnIsDown1: up
2: down
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.6
hwMplsOamRlsnRowStatusThis variable is used to create, modify, and
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.1.4.1.7
.1.3.6.1.4.1.2011.5.12.7.1.1.6 · 1 row entry · 21 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsOamL2vcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsOamL2vcTable'
This table specifies PW MPLS OAM capability and 
associated information, such as DetType and DetFrequence.
hwMplsOamL2vcEntry row .1.3.6.1.4.1.2011.5.12.7.1.1.6.1
An entry in this table is created by binding the peer-ip,
vc-type and vc-id.
Column Syntax OID
hwMplsOamL2vcPeerIpThis object indicates the peer ip address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.1
hwMplsOamL2vcVcTypeThere are seventeen types of vc.
1: fr;
2: atmAal5Sdu;
3: atmTransCell;
4: vlan;
5: ethernet;
6: hdlc;
7: ppp;
9: atmNto1Vcc;
10:atmNto1Vpc;
11:ipLayer2;
12:atm1to1Vcc;
13:atm1to1Vpc;
14:atmAal5Pdu;
16:cep;
17:satopE1;
…
Enumeration
Enumerated Values:
0unknown
1fr
2atmAal5Sdu
3atmTransCell
4vlan
5ethernet
6hdlc
7ppp
9atmNto1Vcc
10atmNto1Vpc
11ipLayer2
12atm1to1Vcc
13atm1to1Vpc
14atmAal5Pdu
16cep
17satopE1
18satopT1
21cesopsnBasic
64ipInterworking
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.2
hwMplsOamL2vcVcIdThis object indicates the vc id of pw type.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.3
hwMplsOamL2vcRemotePeerIpThis object indicates the remote peer ip address.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.4
hwMplsOamL2vcRemoteVcTypeThere are seventeen types of vc.
1: fr;
2: atmAal5Sdu;
3: atmTransCell;
4: vlan;
5: ethernet;
6: hdlc;
7: ppp;
9: atmNto1Vcc;
10:atmNto1Vpc;
11:ipLayer2;
12:atm1to1Vcc;
13:atm1to1Vpc;
14:atmAal5Pdu;
16:cep;
17:satopE1;
…
Enumerationr/w
Enumerated Values:
0unknown
1fr
2atmAal5Sdu
3atmTransCell
4vlan
5ethernet
6hdlc
7ppp
9atmNto1Vcc
10atmNto1Vpc
11ipLayer2
12atm1to1Vcc
13atm1to1Vpc
14atmAal5Pdu
16cep
17satopE1
18satopT1
21cesopsnBasic
64ipInterworking
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.5
hwMplsOamL2vcRemoteVcIdThis object indicates the remote vc id of pw type.SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.6
hwMplsOamL2vcDetTypeThere are two types of OAM packets, CV and FFD.
1: CV;
2: FFD.
Enumerationr/w
Enumerated Values:
1cv
2ffd
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.7
hwMplsOamL2vcDetFreqFor CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50…
Enumerationr/w
Enumerated Values:
0cv1000ms
1ffd10ms2
2ffd20ms3
3ffd50ms4
4ffd100ms5
5ffd200ms6
6ffd500ms7
7ffd3ms8
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.8
hwMplsOamL2vcRevDetType0: invalid;
1: CV;
2: FFD.
Enumeration
Enumerated Values:
0invalid
1cv
2ffd
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.9
hwMplsOamL2vcRevDetFreqFor CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3…
Enumeration
Enumerated Values:
0cv1000ms
1ffd10ms2
2ffd20ms3
3ffd50ms4
4ffd100ms5
5ffd200ms6
6ffd500ms7
7invalid8
8ffd3ms9
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.10
hwMplsOamL2vcSendEnable0: The OAM Send function is Disabled;
1: The OAM Send function is Eabled;
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.11
hwMplsOamL2vcReceiveEnable0: The OAM Receive function is Disabled;
1: The OAM Receive function is Eabled;
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.12
hwMplsOamL2vcAutoProlEn0: disable;
1: enable;
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.13
hwMplsOamL2vcAutoOvertimeIf the oam receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the oam does not receive any CV/FFD packet before the timer
expires, It will send BDI with dLOCV defect.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.14
hwMplsOamL2vcValid1: stop detect;
2: start detect;
3: ready.
Enumeration
Enumerated Values:
1stop
2start
3ready
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.15
hwMplsOamL2vcAvaState0: available state;
1: unavailable state.
Enumeration
Enumerated Values:
0available
1unavailable
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.16
hwMplsOamL2vcDefectType0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mism…
Enumeration
Enumerated Values:
0nondefect
1dServer
2dPeerMe
3dLOCV
4dTTSIMismatch
5dTTSIMismerge
6dExcess
7dUnknown
8dOamFail
9pwDown
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.17
hwMplsOamL2vcBdiDefectType0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mism…
Enumeration
Enumerated Values:
0nondefect
1dServer
2dPeerMe
3dLOCV
4dTTSIMismatch
5dTTSIMismerge
6dExcess
7dUnknown
8dOamFail
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.18
hwMplsOamL2vcRowStatusThis variable is used to create, modify, and
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.30
hwMplsOamL2vcCompatibilityMode1: ptnMode;
2: routerMode;
Valid only for the l2vc configuration.
Enumerationr/w
Enumerated Values:
1ptnMode
2routerMode
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.31
hwMplsOamL2vcBDIFreqBDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding direction.
The frequency of BDI can be set by u…
Enumerationr/w
Enumerated Values:
1perSecond
2detectFrequency
.1.3.6.1.4.1.2011.5.12.7.1.1.6.1.32
.1.3.6.1.4.1.2011.5.12.7.1.1.7 · 1 row entry · 17 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsOamBidirectionalTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsOamBidirectionalTunnelTable'
This table specifies Static Co-Route MPLS OAM capability and 
associated information, such as DetType and DetFrequence.
hwMplsOamBidirectionalTunnelEntry row .1.3.6.1.4.1.2011.5.12.7.1.1.7.1
An entry in this table is created by binding the tunnel ifindex.
Column Syntax OID
hwMplsOamBidirectionalTunnelIndexThis is a unique index for an OAM entry in the OAM table.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.1
hwMplsOamBidirectionalTunnelTunnNameThe name of a tunnel.OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.2
hwMplsOamBidirectionalTunnelDetTypeThere are two types of OAM packets, CV and FFD.
1: CV;
2: FFD.
Enumerationr/w
Enumerated Values:
1cv
2ffd
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.3
hwMplsOamBidirectionalTunnelDetFreqFor CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50…
Enumerationr/w
Enumerated Values:
0cv1000ms
1ffd10ms2
2ffd20ms3
3ffd50ms4
4ffd100ms5
5ffd200ms6
6ffd500ms7
7ffd3ms8
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.4
hwMplsOamBidirectionalTunnelRevDetType0: invalid;
1: CV;
2: FFD.
Enumeration
Enumerated Values:
0invalid
1cv
2ffd
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.5
hwMplsOamBidirectionalTunnelRevDetFreqFor CV: the frequency is static, per second.
For FFD: the frequency is set by user. The value
can be 10ms, 20ms, 50ms,100ms,200ms,500ms,3ms.
Any other frequency is wrong.
0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3…
Enumeration
Enumerated Values:
0cv1000ms
1ffd10ms2
2ffd20ms3
3ffd50ms4
4ffd100ms5
5ffd200ms6
6ffd500ms7
7invalid8
8ffd3ms9
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.6
hwMplsOamBidirectionalTunnelSendEnable0: The OAM Send function is Disabled;
1: The OAM Send function is Eabled;
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.7
hwMplsOamBidirectionalTunnelReceiveEnable0: The OAM Receive function is Disabled;
1: The OAM Receive function is Eabled;
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.8
hwMplsOamBidirectionalTunnelAutoProtocolEnable0: disable;
1: enable;
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.9
hwMplsOamBidirectionalTunnelAutoOvertimeIf the oam receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the oam does not receive any CV/FFD packet before the timer
expires, It will send BDI with dLOCV defect.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.10
hwMplsOamBidirectionalTunnelValid1: stop detect;
2: start detect;
3: ready.
Enumeration
Enumerated Values:
1stop
2start
3ready
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.11
hwMplsOamBidirectionalTunnelAvaState0: available state;
1: unavailable state.
Enumeration
Enumerated Values:
0available
1unavailable
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.12
hwMplsOamBidirectionalTunnelDefectType0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mism…
Enumeration
Enumerated Values:
0nondefect
1dServer
2dPeerMe
3dLOCV
4dTTSIMismatch
5dTTSIMismerge
6dExcess
7dUnknown
8dOamFail
9corouteDown
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.13
hwMplsOamBidirectionalTunnelBdiDefectType0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, Trail Termination Source Identifier Mism…
Enumeration
Enumerated Values:
0nondefect
1dServer
2dPeerMe
3dLOCV
4dTTSIMismatch
5dTTSIMismerge
6dExcess
7dUnknown
8dOamFail
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.14
hwMplsOamBidirectionalTunnelRowStatusThis variable is used to create, modify, and
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.15
hwMplsOamBidirectionalTunnelCompatibilityMode1: ptnMode;
2: routerMode;
Valid only for the bidirectional tunnel configuration.
Enumerationr/w
Enumerated Values:
1ptnMode
2routerMode
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.16
hwMplsOamBidirectionalTunnelBDIFreqBDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding direction.
The frequency of BDI can be set by u…
Enumerationr/w
Enumerated Values:
1perSecond
2detectFrequency
.1.3.6.1.4.1.2011.5.12.7.1.1.7.1.17
.1.3.6.1.4.1.2011.5.12.7.1.3.1 · 1 row entry · 20 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsPsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsPsTable'
This table specifies per-protection-group MPLS PS 
capability and associated information.
hwMplsPsEntry row .1.3.6.1.4.1.2011.5.12.7.1.3.1.1
An entry in this table is created by an LSR for every
protection group capable of supporting mpls ps.
Indexes
Column Syntax OID
hwMplsPsIndexThis is a unique index for an entry in the mplspsEntry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.1
hwMplsPsTypeThe type of protection switch,can be 1:1,1+1,shared mesh,
packet 1+1,the default choice is 1:1.
In the 1+1 architecture type, a protection LSP is dedicated to
each working LSP with the working LSP bridged onto the
pro…
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.2
hwMplsPsWorkTunnNameThe name of work-tunnel.OctetString.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.3
hwMplsPsWorkTunnIdWork-tunnel id(session-tunnel-id).Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.4
hwMplsPsProtectTunnNameThe name of protect-tunnel.OctetString.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.5
hwMplsPsProtectTunnIdProtect-tunnel id(session-tunnel-id).Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.6
hwMplsPsRevertiveModeRevertive mode is a protection switching mode where revertive
action (switch back to the working LSP) is taken after the
working LSP is repaired.And switching does not occur in a
non-revertive mode.
1: revertive;
2: n…
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.7
hwMplsPsWTRWait to Restore timer is only applicable for the revertive mode
and applies to a working LSP,It prevents reversion back to
select the working LSP until the Wait to Restore timer has
expired.The default value is 12 mi…
Integer32
Constraints:
range: 0-60
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.8
hwMplsPsHoldOffThe time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm.
step is 100ms.maximum is 10s.
Integer32
Constraints:
range: 0-100
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.9
hwMplsPsSwitchConditionThe current switch condition of the protection group.
1: clear,This command clears all of the externally
initiated switch commands listed below;
2: lockout of protection,Fix the selector position on the
working …
Integer32
Constraints:
range: 1-9
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.10
hwMplsPsWorkTunnelStateThe state of working tunnel state in one protection group,
whether it is in detection,
1: it is outof defect
2: it enters defect
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.11
hwMplsPsProtTunnelStateThe state of protection tunnel state in one protection group,
whether it is in detection,
1: it is outof defect
2: it enters defect
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.12
hwMplsPsSwitchResultWhich tunnel is used to transfer the data stream.
1: working-tunnel
2: protection-tunnel
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.13
hwMplsPsCfgTypeThe type of protection switch which is configured.
1: 1:1
2: 1+1
3: shared mesh
4: packet 1:1
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.14
hwMplsPsCfgProtectTunnIdProtect-tunnel id(session-tunnel-id).Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.15
hwMplsPsCfgRevertiveModeRevertive mode is a protection switching mode where revertive
action (switch back to the working LSP) is taken after the
working LSP is repaired.And switching does not occur in a
non-revertive mode.
1: revertive;
2: n…
Integer32
Constraints:
range: 1-2
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.16
hwMplsPsCfgWTRWait to Restore timer is only applicable for the revertive mode
and applies to a working LSP,It prevents reversion back to
select the working LSP until the Wait to Restore timer has
expired.The default value is 12 mi…
Integer32
Constraints:
range: 0-60
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.17
hwMplsPsCfgHoldOffThe time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm.
step is 100ms.maximum is 10s.
Integer32
Constraints:
range: 0-100
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.18
hwMplsPsRowStatusThis variable is used to create, modify, and
delete a row in this table.
1: active
2: not in service
3: not ready
4: create and go
5: create and wait
6: destroy
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.19
hwMplsPsLocalStateThe current local state of the protection group.
0: Lockout of Protection (LO)
1: Signal Fail for Protection (SF-P)
2: Forced Switch (FS)
3: Signal Fail for Working (SF)
4: Signal Degrade for Protection(SD-P)
5: Signa…
Integer32
Constraints:
range: 0-11
.1.3.6.1.4.1.2011.5.12.7.1.3.1.1.20
.1.3.6.1.4.1.2011.5.12.7.1.3.3 · 1 row entry · 6 columns
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsVCPsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLSOAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLSOAM-MIB::hwMplsVCPsTable'
Description.
hwMplsVCPsEntry row .1.3.6.1.4.1.2011.5.12.7.1.3.3.1
this table for these commands
1.mpls te protection tunnel XXX
2. mpls te reverse-lsp { lsp-name XXXX | lsr-id X.X.X.X tunnel-id x }
3. mpls te reserved-for-binding
Column Syntax OID
hwMplsVCPsIfIndexThe index of working tunnel interface of Protection groupIF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.2011.5.12.7.1.3.3.1.1
hwMplsVCPsTNLBindingIt is used by command ' mpls te reserved-for-binding 'SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.2011.5.12.7.1.3.3.1.2
hwMplsTeReverseLspNameIt is used for command ' mpls te reverse-lsp lspname'OctetStringr/w.1.3.6.1.4.1.2011.5.12.7.1.3.3.1.3
hwMplsVcPsRowStatus1: active;
2: notInservice;
3: notReady;
4: CreateAndGo;
5: CreateAndWait;
6: destroy;
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.2011.5.12.7.1.3.3.1.4
hwMplsTeReverseLspLsrIdIt is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.2011.5.12.7.1.3.3.1.5
hwMplsTeReverseLspTunnIdIt is used for command ' mpls te reverse-lsp lsr-id X.X.X.X tunnel-id XX'Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.2011.5.12.7.1.3.3.1.6