hwMplsOamEgrEntry
HUAWEI-MPLSOAM-MIB ·
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1
Object
row
An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress.
Context
- MIB
- HUAWEI-MPLSOAM-MIB
- OID
.1.3.6.1.4.1.2011.5.12.7.1.1.3.1- Type
- row
- Status
- current
- Parent
- hwMplsOamEgrTable
- Table
- hwMplsOamEgrTable
- Children
- 15
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsOamEgrLspName The object indicates the name of static LSP at egress. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 |
| hwMplsOamEgrBDIFreq BDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding directio… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 |
| hwMplsOamEgrEnable Whether one LSP is enabled with OAM.
If disable, LSP is not monitored;
If enable, CV/FFD is generated at the source LSR of the LSP and
checked at the sink LSR of the LSP, and use… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 |
| hwMplsOamEgrValid 1: stop detect;
2: start detect. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 |
| hwMplsOamEgrAvaState If the LSP Timer (T1) expires, then the LSP enters the
Unavailable state. The start point of the Unavailable state
is deemed to be at the entry into the LSP defect state.
An LSP… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 |
| hwMplsOamEgrDefectType 0: no defect;
1: dServer,
2: dPeerMe,
3: dLOCV, Loss of Connectivity Verification defect;
4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect;
5: dTTSIMismerge, … | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 |
| hwMplsOamEgrRowStatus This variable is used to create, modify, and
delete a row in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 |
| hwMplsOamEgrLsrId The object indicates the Ingress LSR ID of the LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 |
| hwMplsOamEgrSessTunnId The object indicates the the Ingress session tunnel ID of the LSP.. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 |
| hwMplsOamEgrDetType 0: invalid, if auto-protocol, this detect type is invalid;
1: CV;
2: FFD. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 |
| hwMplsOamEgrDetFreq 0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: invalid;
8: 3ms. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 |
| hwMplsOamEgrRevType When an LSP is found to be in defect, the sink LSR of the LSP
should send BDI to inform the source LSR of the LSP,the BDI is
transferred through the reverse LSP.
The type of rev… | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 |
| hwMplsOamEgrRevTunnName The object indicates the name of a reverse tunnel. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7 |
| hwMplsOamEgrAutoEn If autoprotocol, then the egress can process extended FDI sent
by ingress.
0: disable;
1: enable;
Valid only for the egress configuration. | column | Enumeration | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8 |
| hwMplsOamEgrAutoOvertime This time is set at the egress.
If the egress receives CV/FFD, it records the parameters
included in the packet, such as OAM type and frequency.
If the egress does not receive an… | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsOamEgrLspName The object indicates the name of static LSP at egress. | column | OctetString | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 |
| hwMplsOamEgrLsrId The object indicates the Ingress LSR ID of the LSP. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 |
| hwMplsOamEgrSessTunnId The object indicates the the Ingress session tunnel ID of the LSP.. | column | Integer32 | .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 |