hwMplsOamEgrDetFreq

HUAWEI-MPLSOAM-MIB · .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5

MIB view Table view

Object

column r/w Enumeration

0: 1000ms(only for cv);
1: 10ms;
2: 20ms;
3: 50ms;
4: 100ms;
5: 200ms;
6: 500ms;
7: invalid;
8: 3ms.

Context

MIB: HUAWEI-MPLSOAM-MIB
OID: .1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5
Type: column
Access: readwrite
Status: current
Parent: hwMplsOamEgrEntry
Table: hwMplsOamEgrTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	cv1000ms
`1`	ffd10ms2
`2`	ffd20ms3
`3`	ffd50ms4
`4`	ffd100ms5
`5`	ffd200ms6
`6`	ffd500ms7
`7`	invalid8
`8`	ffd3ms9

Related Objects

Sibling Objects

Object	Type	Syntax	OID
hwMplsOamEgrLspName The object indicates the name of static LSP at egress.	column	OctetString	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1`
hwMplsOamEgrBDIFreq BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding directio…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10`
hwMplsOamEgrEnable Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LSP and checked at the sink LSR of the LSP, and use…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11`
hwMplsOamEgrValid 1: stop detect; 2: start detect.	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12`
hwMplsOamEgrAvaState If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to be at the entry into the LSP defect state. An LSP…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13`
hwMplsOamEgrDefectType 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSIMismatch, Trail Termination Source Identifier Mismatch defect; 5: dTTSIMismerge, …	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14`
hwMplsOamEgrRowStatus This variable is used to create, modify, and delete a row in this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15`
hwMplsOamEgrLsrId The object indicates the Ingress LSR ID of the LSP.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2`
hwMplsOamEgrSessTunnId The object indicates the the Ingress session tunnel ID of the LSP..	column	Integer32	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3`
hwMplsOamEgrDetType 0: invalid, if auto-protocol, this detect type is invalid; 1: CV; 2: FFD.	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4`
hwMplsOamEgrRevType When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP,the BDI is transferred through the reverse LSP. The type of rev…	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6`
hwMplsOamEgrRevTunnName The object indicates the name of a reverse tunnel.	column	OctetString	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7`
hwMplsOamEgrAutoEn If autoprotocol, then the egress can process extended FDI sent by ingress. 0: disable; 1: enable; Valid only for the egress configuration.	column	Enumeration	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8`
hwMplsOamEgrAutoOvertime This time is set at the egress. If the egress receives CV/FFD, it records the parameters included in the packet, such as OAM type and frequency. If the egress does not receive an…	column	Integer32	`.1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9`