hwMplsTunnelDownReason

Indicates the alarm reason as below:
Options:
1.other(1)         -indicates that another cause was involved.
2.staticLspDown(2)         -indicates that Static LSP down.
3.staticCrlspDown(3)         -indicates that Static CR-LSP down.
4.outIfDown(4)         -indicates that the out interface of the RSVP LSP ingress is down.
5.resourcePreempted(5)         -indicates that the resource of RSVP LSP is preempted.
6.rsvpMessageTimeout(6)         -indicates that RSVP message timeout.
7.rsvpNeighborLost(7)         -indicates that RSVP neighbor lost.
8.bypassTunnelDownOrUnbinded(8)         -indicates that The bypass-tunnel is down or is unbinded with main tunnel, as bypass-tunnel is in used.
9.cspfComputeFail(9)         -indicates that CSPF compute fail.
10.userShutdown(10)         -indicates that user shutdown the tunnel.
11.tpoamLossOfContinuity(11)         -indicates that TPOAM indicates the connectivity fault of the link.
12.tpoamAlarmIndicationSignal(12)         -indicates that TPOAM indicates receive alarm indication signal defect of the link.
13.tpoamRemoteDefectIndication(13)         -indicates that TPOAM indicates the remote defect of the link.
14.tpoamUnexpectedMEG(14)         -indicates that TPOAM indicates receive unexpected MEG-ID defect of the link.
15.tpoamUnexpectedMEP(15)         -indicates that TPOAM indicates receive unexpected MEP-ID defect of the link.
16.tpoamLossSF(16)         -indicates that TPOAM indicates packet lost exceed signal fault threshold in the local link.
17.tpoamPeriod(17)         -indicates that TPOAM indicates packet unexpected period defect of the link.
18.mplsOamLocv(18)         -indicates that MPLS OAM connectivity fault.
19.mplsOamExcess(19)         -indicates that MPLS OAM TTSI excess.
20.mplsOamMisMatch(20)         -indicates that MPLS OAM TTSI mismatch.
21.mplsOamMisMerge(21)         -indicates that MPLS OAM TTSI merge error.
22.mplsOamUnknown(22)         -indicates that MPLS OAM unknown error.
23.mplsOamBdi(23)         -indicates MPLS OAM BDI.
24.mplsOamFdi(24)         -indicates MPLS OAM FDI.
25.mplsOamSF(25)         -indicates that MPLS OAM signal fail.
26.mplsOamSD(26)         -indicates that MPLS OAM signal degrade.
27.mplsOamDOamFail(27)         -indicates that MPLS OAM fail.
28.serviceResume(28)         -indicates that service resume.
29.serviceDelete(29)         -indicates that service delete.
30.p2mpAllLeafDown(30)         -indicates that all the P2MP leafs are down.
31.clear(100)         -indicates that alarm clears.

MIB

HUAWEI-MPLS-EXTEND-MIB

OID

.1.3.6.1.4.1.2011.5.25.121.2.2.3

Type

scalar

Access

notifyonly

Status

current

Parent

hwMplsTrapObjects