hwMplsTunnelDownIfIpAddrType
HUAWEI-MPLS-EXTEND-MIB ·
.1.3.6.1.4.1.2011.5.25.121.2.2.10
Object
scalar
INET-ADDRESS-MIBInetAddressType
The value of this object identifies the IP address type of the error interface on a tunnel.
Context
- MIB
- HUAWEI-MPLS-EXTEND-MIB
- OID
.1.3.6.1.4.1.2011.5.25.121.2.2.10- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- hwMplsTrapObjects
- Siblings
- 23
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsTunnelIfName obsolete The Tunnel Interface name. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.2.2.1 |
| hwMplsResourceType The value of this object identifies that the number of MPLS resources has exceeded the threshold or the maximum number.
Options: … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.121.2.2.11 |
| hwMplsResourceCurrentCount The value of this object identifies the number of the resources. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.12 |
| hwMplsResourceThreshold The value of this object identifies the threshold for the number of the resources. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.13 |
| hwMplsResourceTotalCount The value of this object identifies the maximum number of allowed resources. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.14 |
| hwMplsSessionTunnelId The value of this object identifies the Tunnel ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.15 |
| hwMplsLocalLspId The value of this object identifies the LSP ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.16 |
| hwMplsIngressLsrId The value of this object identifies the ingress LSR ID. | scalar | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.2011.5.25.121.2.2.17 |
| hwMplsEgressLsrId The value of this object identifies the egress LSR ID. | scalar | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.2011.5.25.121.2.2.18 |
| hwMplsLspName This object indicates the name of an bidirectional static CR-LSP. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.2.2.19 |
| hwMplsTunnelFrrConfigOper obsolete The value of this object identifies the operation that an FRR configuration is committed on the tunnel.
Options:
1.unconfig(… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.121.2.2.2 |
| hwMplsP2mpId Indicates the P2MP id | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.121.2.2.20 |
| hwMplsFeatureName The value of this object identifies the feature name.
Options:
1.ldp(1) -Indicates that the feature name is ldp.
2.t… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.121.2.2.21 |
| hwMplsAlgorithmName The value of this object identifies the algorithm name.
Options:
1.md5(1) -Indicates that the algorithm name is md5.… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.121.2.2.22 |
| hwMplsSlot Slot ID of an interface board. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.23 |
| hwMplsChassis Chassis ID of an interface board. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.24 |
| hwMplsTunnelDownReason Indicates the alarm reason as below:
Options:
1.other(1) -indicates that another cause was involved.
2.staticLspDown(2) -indicates that Static LSP down.
3.staticCr… | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.121.2.2.3 |
| hwMplsLspProtocol The value of this object identifies the protocol of the lsp which exceeds the threshold or total count.
Options:
1.ldp(1) … | scalar | Enumeration | .1.3.6.1.4.1.2011.5.25.121.2.2.4 |
| hwMplsLspThreshold The value of this object identifies the threshold of the lsp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.5 |
| hwMplsLspTotalCount The value of this object identifies the total permit count of lsp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.6 |
| hwMplsLspCurrentCount The value of this object identifies the current count of the lsp. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.7 |
| hwMplsTunnelDownLSRID The value of this object identifies the LSR ID of the error node on a tunnel. | scalar | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.2011.5.25.121.2.2.8 |
| hwMplsTunnelDownIfIpAddr The value of this object identifies the IP address of the error interface on a tunnel. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2011.5.25.121.2.2.9 |