hwMplsTunnelBfdPathMismatch
HUAWEI-MPLS-EXTEND-MIB ·
.1.3.6.1.4.1.2011.5.25.121.2.1.81
Object
notification
This notification indicates the forward primary LSP path is the same as the reverse hot-standby LSP path, and the reverse primary LSP path is the same as the forward hot-standby LSP path, causing path mismatches.
Context
- MIB
- HUAWEI-MPLS-EXTEND-MIB
- OID
.1.3.6.1.4.1.2011.5.25.121.2.1.81- Type
- notification
- Status
- current
- Parent
- hwLspTrap
- Siblings
- 102
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsStaticLspUp This notification indicates that the status of referred static LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.1 |
| hwMplsTunnelHSBResume This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.10 |
| hwP2mpTeSubLspDownAlarm This object indicates that the status of the P2MP tunnel sub-lsp changes to down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.100 |
| hwP2mpTeSubLspDownAlarmClear This object indicates that the alarm of the P2MP tunnel sub-lsp was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.101 |
| hwMplsTeBandwidthExceed This object indicates that the configured maximum reservable bandwidth of MPLS TE is greater than the remaining bandwidth of the interface. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.102 |
| hwMplsTeBandwidthExceedClear This object indicates that the MPLS-TE bandwidth exceed alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.103 |
| hwMplsTunnelOBSwitch This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.11 |
| hwMplsTunnelOBResume This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.12 |
| hwMplsTunnelUp obsolete The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.13 |
| hwMplsTunnelDown obsolete The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.14 |
| hwMplsTunnelChangeBw This notification indicates that the bandwidth of the tunnel is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.15 |
| hwMplsTunnelTpOamLossSD This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.16 |
| hwMplsOamSDRecovery This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.17 |
| hwMplsOamLoss This object indicates that TP OAM detected tunnel connectivity faults. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.18 |
| hwMplsOamLossRecovery This object indicates that TP OAM did not detect tunnel connectivity faults. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.19 |
| hwMplsStaticLspDown This notification indicates that the status of referred static LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.2 |
| hwMplsOamAis This object indicates that TP OAM detected an alarm indication signal. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.20 |
| hwMplsOamAisRecovery This object indicates that TP OAM no longer detected alarm indication signals. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.21 |
| hwMplsOamRdi This object indicates that TP OAM detected remote defects. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.22 |
| hwMplsOamRdiRecovery This object indicates that the remote defects detected by TP OAM were removed. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.23 |
| hwMplsOamMeg This object indicates that the names configured on the two ends of the tunnel are inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.24 |
| hwMplsOamMegRecovery This object indicates that the names configured on the two ends of the tunnel now are consistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.25 |
| hwMplsOamMep This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.26 |
| hwMplsOamMepRecovery This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.27 |
| hwMplsOamSF This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.28 |
| hwMplsOamSFRecovery This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local link. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.29 |
| hwMplsStaticCRLspUp This notification indicates that the status of referred static CR-LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.3 |
| hwMplsOamPeriod This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.30 |
| hwMplsOamPeriodRecovery This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.31 |
| hwMplsOamLck This object indicates that TP OAM detected the service level of the tunnel has been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.32 |
| hwMplsOamLckRecovery This object indicates that TP OAM detected the service level of the tunnel has not been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.33 |
| hwMplsOamExcess This object indicates that MPLS OAM detected the tunnel received excess alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.34 |
| hwMplsOamExcessRecovery This object indicates that MPLS OAM detected the tunnel received excess alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.35 |
| hwMplsOamMisMatch This object indicates that MPLS OAM detected the tunnel received MisMatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.36 |
| hwMplsOamMisMatchRecovery This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.37 |
| hwMplsOamMisMerge This object indicates that MPLS OAM detected the tunnel received MisMerge alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.38 |
| hwMplsOamMisMergeRecovery This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.39 |
| hwMplsStaticCRLspDown This notification indicates that the status of referred static CR-LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.4 |
| hwMplsOamUnknown This object indicates that MPLS OAM detected the tunnel received Unknown alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.40 |
| hwMplsOamUnknownRecovery This object indicates that MPLS OAM detected the tunnel received Unknown alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.41 |
| hwMplsOamBDI This object indicates that MPLS OAM detected the tunnel received BDI alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.42 |
| hwMplsOamBDIRecovery This object indicates that MPLS OAM detected the tunnel received BDI alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.43 |
| hwMplsOamFail This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.44 |
| hwMplsOamFailRecovery This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.45 |
| hwMplsTunnelPrimaryUp This notification indicates that the status of the RSVP-TE Primary LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.46 |
| hwMplsTunnelPrimaryDown This notification indicates that the status of the RSVP-TE Primary LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.47 |
| hwMplsTunnelHotstandbyUp This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.48 |
| hwMplsTunnelHotstandbyDown This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.49 |
| hwMplsTeFrrProtAval This notification indicates that the primary tunnel is bound to TE FRR bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.5 |
| hwMplsTunnelOrdinaryUp This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.50 |
| hwMplsTunnelOrdinaryDown This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.51 |
| hwMplsTunnelBesteffortUp This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.52 |
| hwMplsTunnelBesteffortDown This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.53 |
| hwMplsTeAutoTunnelDownClear This notification indicates that the TE Auto tunnel Down alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.54 |
| hwMplsTeAutoTunnelPrimaryDownClear This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.55 |
| hwMplsTunnelBBSwitch This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.56 |
| hwMplsTunnelBBResume This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.57 |
| hwMplsExtTunnelDown This notification indicates that the status of te tunnel changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.58 |
| hwMplsExtTunnelDownClear This notification indicates that the down alarm of te tunnel was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.59 |
| hwMplsTeFrrProtNotAval This notification indicates that the primary tunnel is unbound to bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.6 |
| hwMplsOamLocalLock This object indicates that TP OAM detected the tunnel has been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.60 |
| hwMplsOamLocalLockRecovery This object indicates that TP OAM detected the tunnel has not been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.61 |
| hwMplsTunnelDelete This notification indicates that the mpls te tunnel was deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.62 |
| hwMplsLspThresholdExceed This object indicates that lsp count has exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.63 |
| hwMplsLspThresholdExceedClear This object indicates that lsp count has resumed from exceeding the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.64 |
| hwMplsLspTotalCountExceed This object indicates that lsp count has reached the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.65 |
| hwMplsLspTotalCountExceedClear This object indicates that lsp count has resumed from reaching the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.66 |
| hwMplsDynamicLabelThresholdExceed This object indicates that label usage has exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.67 |
| hwMplsDynamicLabelThresholdExceedClear This object indicates that label usage has resumed from exceeding the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.68 |
| hwMplsDynamicLabelTotalCountExceed This object indicates that label count has reached the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.69 |
| hwMplsTeFrrSwitch This notification indicates that the primary tunnel is switches to the TE FRR bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.7 |
| hwMplsDynamicLabelTotalCountExceedClear This object indicates that label usage count has resumed from reaching the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.70 |
| hwMplsResourceThresholdExceed This object indicates that the number of MPLS resources has exceeded the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.71 |
| hwMplsResourceThresholdExceedClear This object indicates that the number of MPLS resources has fallen below the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.72 |
| hwMplsResourceTotalCountExceed This object indicates that the number of MPLS resources has reached the maximum number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.73 |
| hwMplsResourceTotalCountExceedClear This object indicates that the number of MPLS resources fallen below the recovery number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.74 |
| hwMplsLspLoopBack This object indicates that the lsp was looped back. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.75 |
| hwMplsLspLoopBackClear This object indicates that loopback of the LSP is restored. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.76 |
| hwMplsTunnelCommitLost This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits only some MPLS tunnel configurations. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.77 |
| hwMplsTunnelCommitLostClear This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits all MPLS tunnel configurations. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.78 |
| hwMplsTunnelHotstandbySwitch This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.79 |
| hwMplsTeFrrResume This notification indicates that the primary tunnel is switched back from the TE FRR bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.8 |
| hwMplsTunnelHotstandbyResume This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.80 |
| hwMplsTunnelBfdPathMismatchClear This notification indicates that either or both path mismatches were rectified. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.82 |
| hwMplsTeLspBfdDown This notification indicates the bfd status of te-lsp changes to down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.83 |
| hwMplsTeLspBfdDownClear This notification indicates that the down alarm of bfd was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.84 |
| hwMplsTunnelDelegationReturn This notification indicates that the delegation of Tunnel LSP is returned by server. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.85 |
| hwMplsTunnelDelegationReturnClear This notification indicates that the delegation of Tunnel LSP is returned by server. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.86 |
| hwMplsOamFDI This object indicates that MPLS OAM detected the tunnel received FDI alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.87 |
| hwMplsOamFDIRecovery This object indicates that MPLS OAM detected the tunnel received FDI alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.88 |
| hwP2mpTeTunnelDown This object indicates that the status of the P2MP tunnel changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.89 |
| hwMplsTunnelHSBSwitch This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.9 |
| hwP2mpTeTunnelDownClear This object indicates that the alarm of the P2MP tunnel was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.90 |
| hwP2mpTeSubLspDown This object indicates that the status of the P2MP tunnel sub-lsp changes to down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.91 |
| hwBlockLabelThresholdExceed This object indicates that label usage has exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.92 |
| hwBlockLabelThresholdExceedClear This object indicates that label usage has resumed from exceeding the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.93 |
| hwBlockLabelTotalCountExceed This object indicates that label count has reached the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.94 |
| hwBlockLabelTotalCountExceedClear This object indicates that label usage count has resumed from reaching the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.95 |
| hwMplsInsecureAlgorithm This object indicates that an insecure encryption algorithm is used, which has security risks. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.96 |
| hwMplsInsecureAlgorithmClear This object indicates that the insecure encryption algorithm alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.97 |
| hwMplsSlotResTotalCountExceed This object indicates that the number of MPLS resources on the interface board has reached the maximum number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.98 |
| hwMplsSlotResTotalCountExceedClear This object indicates that the number of MPLS resources on the interface board fallen below the recovery number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsTunnelInterfaceName Indicates the tunnel interface name. The object is
only valid at the ingress. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.1.1.1.29 |
| hwMplsSessionTunnelId The value of this object identifies the Tunnel ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.15 |
| hwMplsLocalLspId The value of this object identifies the LSP ID. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.2.2.16 |
| hwMplsIngressLsrId The value of this object identifies the ingress LSR ID. | scalar | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.2011.5.25.121.2.2.17 |
| hwMplsEgressLsrId The value of this object identifies the egress LSR ID. | scalar | MPLS-TC-STD-MIBMplsLsrIdentifier | .1.3.6.1.4.1.2011.5.25.121.2.2.18 |
| hwMplsTunnelIfName obsolete The Tunnel Interface name. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.2.2.1 |
| hwMplsTunnelSignalledTunnelName Indicates the user-defined tunnel name | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.1.1.1.33 |