hwMplsTeBandwidthExceedClear
HUAWEI-MPLS-EXTEND-MIB ·
.1.3.6.1.4.1.2011.5.25.121.2.1.103
Object
notification
This object indicates that the MPLS-TE bandwidth exceed alarm was cleared.
Context
- MIB
- HUAWEI-MPLS-EXTEND-MIB
- OID
.1.3.6.1.4.1.2011.5.25.121.2.1.103- Type
- notification
- Status
- current
- Parent
- hwLspTrap
- Siblings
- 102
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsStaticLspUp This notification indicates that the status of referred static LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.1 |
| hwMplsTunnelHSBResume This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.10 |
| hwP2mpTeSubLspDownAlarm This object indicates that the status of the P2MP tunnel sub-lsp changes to down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.100 |
| hwP2mpTeSubLspDownAlarmClear This object indicates that the alarm of the P2MP tunnel sub-lsp was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.101 |
| hwMplsTeBandwidthExceed This object indicates that the configured maximum reservable bandwidth of MPLS TE is greater than the remaining bandwidth of the interface. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.102 |
| hwMplsTunnelOBSwitch This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.11 |
| hwMplsTunnelOBResume This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.12 |
| hwMplsTunnelUp obsolete The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.13 |
| hwMplsTunnelDown obsolete The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.14 |
| hwMplsTunnelChangeBw This notification indicates that the bandwidth of the tunnel is changed. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.15 |
| hwMplsTunnelTpOamLossSD This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.16 |
| hwMplsOamSDRecovery This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.17 |
| hwMplsOamLoss This object indicates that TP OAM detected tunnel connectivity faults. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.18 |
| hwMplsOamLossRecovery This object indicates that TP OAM did not detect tunnel connectivity faults. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.19 |
| hwMplsStaticLspDown This notification indicates that the status of referred static LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.2 |
| hwMplsOamAis This object indicates that TP OAM detected an alarm indication signal. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.20 |
| hwMplsOamAisRecovery This object indicates that TP OAM no longer detected alarm indication signals. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.21 |
| hwMplsOamRdi This object indicates that TP OAM detected remote defects. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.22 |
| hwMplsOamRdiRecovery This object indicates that the remote defects detected by TP OAM were removed. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.23 |
| hwMplsOamMeg This object indicates that the names configured on the two ends of the tunnel are inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.24 |
| hwMplsOamMegRecovery This object indicates that the names configured on the two ends of the tunnel now are consistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.25 |
| hwMplsOamMep This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.26 |
| hwMplsOamMepRecovery This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.27 |
| hwMplsOamSF This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.28 |
| hwMplsOamSFRecovery This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local link. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.29 |
| hwMplsStaticCRLspUp This notification indicates that the status of referred static CR-LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.3 |
| hwMplsOamPeriod This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.30 |
| hwMplsOamPeriodRecovery This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.31 |
| hwMplsOamLck This object indicates that TP OAM detected the service level of the tunnel has been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.32 |
| hwMplsOamLckRecovery This object indicates that TP OAM detected the service level of the tunnel has not been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.33 |
| hwMplsOamExcess This object indicates that MPLS OAM detected the tunnel received excess alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.34 |
| hwMplsOamExcessRecovery This object indicates that MPLS OAM detected the tunnel received excess alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.35 |
| hwMplsOamMisMatch This object indicates that MPLS OAM detected the tunnel received MisMatch alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.36 |
| hwMplsOamMisMatchRecovery This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.37 |
| hwMplsOamMisMerge This object indicates that MPLS OAM detected the tunnel received MisMerge alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.38 |
| hwMplsOamMisMergeRecovery This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.39 |
| hwMplsStaticCRLspDown This notification indicates that the status of referred static CR-LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.4 |
| hwMplsOamUnknown This object indicates that MPLS OAM detected the tunnel received Unknown alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.40 |
| hwMplsOamUnknownRecovery This object indicates that MPLS OAM detected the tunnel received Unknown alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.41 |
| hwMplsOamBDI This object indicates that MPLS OAM detected the tunnel received BDI alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.42 |
| hwMplsOamBDIRecovery This object indicates that MPLS OAM detected the tunnel received BDI alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.43 |
| hwMplsOamFail This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.44 |
| hwMplsOamFailRecovery This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.45 |
| hwMplsTunnelPrimaryUp This notification indicates that the status of the RSVP-TE Primary LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.46 |
| hwMplsTunnelPrimaryDown This notification indicates that the status of the RSVP-TE Primary LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.47 |
| hwMplsTunnelHotstandbyUp This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.48 |
| hwMplsTunnelHotstandbyDown This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.49 |
| hwMplsTeFrrProtAval This notification indicates that the primary tunnel is bound to TE FRR bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.5 |
| hwMplsTunnelOrdinaryUp This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.50 |
| hwMplsTunnelOrdinaryDown This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.51 |
| hwMplsTunnelBesteffortUp This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.52 |
| hwMplsTunnelBesteffortDown This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.53 |
| hwMplsTeAutoTunnelDownClear This notification indicates that the TE Auto tunnel Down alarm was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.54 |
| hwMplsTeAutoTunnelPrimaryDownClear This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.55 |
| hwMplsTunnelBBSwitch This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.56 |
| hwMplsTunnelBBResume This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.57 |
| hwMplsExtTunnelDown This notification indicates that the status of te tunnel changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.58 |
| hwMplsExtTunnelDownClear This notification indicates that the down alarm of te tunnel was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.59 |
| hwMplsTeFrrProtNotAval This notification indicates that the primary tunnel is unbound to bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.6 |
| hwMplsOamLocalLock This object indicates that TP OAM detected the tunnel has been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.60 |
| hwMplsOamLocalLockRecovery This object indicates that TP OAM detected the tunnel has not been locked. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.61 |
| hwMplsTunnelDelete This notification indicates that the mpls te tunnel was deleted. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.62 |
| hwMplsLspThresholdExceed This object indicates that lsp count has exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.63 |
| hwMplsLspThresholdExceedClear This object indicates that lsp count has resumed from exceeding the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.64 |
| hwMplsLspTotalCountExceed This object indicates that lsp count has reached the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.65 |
| hwMplsLspTotalCountExceedClear This object indicates that lsp count has resumed from reaching the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.66 |
| hwMplsDynamicLabelThresholdExceed This object indicates that label usage has exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.67 |
| hwMplsDynamicLabelThresholdExceedClear This object indicates that label usage has resumed from exceeding the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.68 |
| hwMplsDynamicLabelTotalCountExceed This object indicates that label count has reached the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.69 |
| hwMplsTeFrrSwitch This notification indicates that the primary tunnel is switches to the TE FRR bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.7 |
| hwMplsDynamicLabelTotalCountExceedClear This object indicates that label usage count has resumed from reaching the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.70 |
| hwMplsResourceThresholdExceed This object indicates that the number of MPLS resources has exceeded the upper threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.71 |
| hwMplsResourceThresholdExceedClear This object indicates that the number of MPLS resources has fallen below the lower threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.72 |
| hwMplsResourceTotalCountExceed This object indicates that the number of MPLS resources has reached the maximum number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.73 |
| hwMplsResourceTotalCountExceedClear This object indicates that the number of MPLS resources fallen below the recovery number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.74 |
| hwMplsLspLoopBack This object indicates that the lsp was looped back. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.75 |
| hwMplsLspLoopBackClear This object indicates that loopback of the LSP is restored. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.76 |
| hwMplsTunnelCommitLost This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits only some MPLS tunnel configurations. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.77 |
| hwMplsTunnelCommitLostClear This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits all MPLS tunnel configurations. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.78 |
| hwMplsTunnelHotstandbySwitch This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.79 |
| hwMplsTeFrrResume This notification indicates that the primary tunnel is switched back from the TE FRR bypass tunnel. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.8 |
| hwMplsTunnelHotstandbyResume This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.80 |
| hwMplsTunnelBfdPathMismatch This notification indicates the forward primary LSP path is the same as the reverse hot-standby LSP path, and the reverse primary LSP path is the same as the forward hot-standby L… | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.81 |
| hwMplsTunnelBfdPathMismatchClear This notification indicates that either or both path mismatches were rectified. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.82 |
| hwMplsTeLspBfdDown This notification indicates the bfd status of te-lsp changes to down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.83 |
| hwMplsTeLspBfdDownClear This notification indicates that the down alarm of bfd was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.84 |
| hwMplsTunnelDelegationReturn This notification indicates that the delegation of Tunnel LSP is returned by server. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.85 |
| hwMplsTunnelDelegationReturnClear This notification indicates that the delegation of Tunnel LSP is returned by server. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.86 |
| hwMplsOamFDI This object indicates that MPLS OAM detected the tunnel received FDI alarm. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.87 |
| hwMplsOamFDIRecovery This object indicates that MPLS OAM detected the tunnel received FDI alarm end. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.88 |
| hwP2mpTeTunnelDown This object indicates that the status of the P2MP tunnel changes to Down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.89 |
| hwMplsTunnelHSBSwitch This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.9 |
| hwP2mpTeTunnelDownClear This object indicates that the alarm of the P2MP tunnel was cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.90 |
| hwP2mpTeSubLspDown This object indicates that the status of the P2MP tunnel sub-lsp changes to down. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.91 |
| hwBlockLabelThresholdExceed This object indicates that label usage has exceeded the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.92 |
| hwBlockLabelThresholdExceedClear This object indicates that label usage has resumed from exceeding the threshold. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.93 |
| hwBlockLabelTotalCountExceed This object indicates that label count has reached the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.94 |
| hwBlockLabelTotalCountExceedClear This object indicates that label usage count has resumed from reaching the total count. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.95 |
| hwMplsInsecureAlgorithm This object indicates that an insecure encryption algorithm is used, which has security risks. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.96 |
| hwMplsInsecureAlgorithmClear This object indicates that the insecure encryption algorithm alarm is cleared. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.97 |
| hwMplsSlotResTotalCountExceed This object indicates that the number of MPLS resources on the interface board has reached the maximum number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.98 |
| hwMplsSlotResTotalCountExceedClear This object indicates that the number of MPLS resources on the interface board fallen below the recovery number. | notification | - | .1.3.6.1.4.1.2011.5.25.121.2.1.99 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| IF-MIBifName The textual name of the interface. The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in commands
entered… | column | SNMPv2-TCDisplayString | .1.3.6.1.2.1.31.1.1.1.1 |