hpicfPimComponentCBSRAdminStatus
HP-ICF-PIM ·
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.1
Object
column
r/w
Enumeration
This objects specifies whether or not the router configured to be a Candidate BSR for the local PIM region. Default is disabled.
Context
- MIB
- HP-ICF-PIM
- OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpicfPimComponentEntry
- Table
- hpicfPimComponentTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpicfPimComponentBSRUpTime Length of time that the elected Bootstrap Router (BSR)
has been up. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.10 |
| hpicfPimComponentBSRNextMessage Time in which the next bootstrap message is due from
the elected Bootstrap Router (BSR). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.11 |
| hpicfPimComponentCRPAdvTimer Next scheduled Candidate RP Advertisement. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.12 |
| hpicfPimComponentCBSRAddress The IP address the Candidate BSR router will advertise
for the local PIM region. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.2 |
| hpicfPimComponentCBSRPriority The priority for Candidate BSR router. In BSR election
process the candidate BSR with the highest (numerically
bigger) priority becomes the BSR. If the priority values
are the s… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.3 |
| hpicfPimComponentCBSRHashMaskLength Specifies the length (in bits) of a multicast group
address to use when mapping a group to one of the
candidate RPs from the RP-Set whose group-prefix
includes the group. The re… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.4 |
| hpicfPimComponentCBSRMessageInterval If this router is the elected BSR, this object
is the interval for sending (multicast out) periodic
Bootstrap (RP-Set) messages on all PIM SM interfaces.
The acceptable range is… | column | seconds Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.5 |
| hpicfPimComponentCRPPriority The priority for the Candidate RP for the local PIM
domain. Determines which Candidate RPs get selected by
the BSR to be in the RP Set. The smaller value means
the higher prior… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.6 |
| hpicfPimComponentCRPAdvInterval The interval at which the Candidate RP transmits
(unicast to the elected BSR) advertise messages in
the local PIM domain. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.7 |
| hpicfPimComponentBSRPriority The priority of the Bootstrap Router (BSR) elected
for the local PIM region. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.8 |
| hpicfPimComponentBSRHashMaskLength The hash mask length of the elected Bootstrap
Router (BSR). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.9 |