hpicfPimComponentTable

HP-ICF-PIM · .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7
MIB view Table view

Object

table 
HP extensions to the pimComponentTable - the 
(conceptual) table containing objects specific to a
PIM domain. One row exists for each domain to which 
the router is connected. Typically, a PIM-SM router 
will be a member of exactly one domain, however, the 
table also supports routers which may form a border 
between two PIM-SM domains and do not forward Bootstrap 
messages between them.

Context

MIB
HP-ICF-PIM
OID
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7
Type
table
Status
current
Parent
hpicfPim
Siblings
20
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfPimAdminStatus
The operational status of the PIM routing protocol on this router. Default is disabled.
scalarEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.1
hpicfPimNumStaticRpfEntries
Total number of Static RPF entries.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.10
hpicfPimVersion
Currently running PIM Version.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.11
hpicfPimStarGEntries
Total number of entries in the (*,G) table
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.12
hpicfPimSGEntries
Total number of entries in the (S,G) table.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.13
hpicfPimMRouteTable
HP extensions to rfc2932's ipMRouteEntry table.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14
hpicfPimTotalNeighborCount
PIM Neighbor Count.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.15
hpicfPimNeighborTable
HP extensions to the pimNeighborTable.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16
hpicfPimUcastRouteTable
Cached Unicast Route related to PIM.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17
hpicfPimJoinPruneTable
Info on Join-Prune messages to send
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18
hpicfPimRPSetTable
Extensions to rfc2943's pimRPSetTable.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19
hpicfPimStateRefreshInterval
The interval between successive State Refresh messages originated by this router. Its default value is 60 seconds. The maximum value allowed in PIM for State Refresh interval will…
scalarseconds Integer32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.2
hpicfPimIfMessageCounterTable
Table of per-interface message counters.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20
hpicfPimUnackGraftsTable
Information about unacknowledged graft messages on the network.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21
hpicfPimSPTThreshold
Specifies a threshold for switching to the Shortest Path Tree (SPT) on this router. If the object has the special value of -1, the Shared Tree rooted to the Rendezvous Point (RP…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.3
hpicfPimTrapControl
Indicates whether the PIM-enabled router will generate SNMP traps for PIM events. The set bit means 'enabled'. - neighborLoss(0) This bit controls whether the notific…
scalarBits.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.4
hpicfPimStaticRPSetTable
The (conceptual) table containing statically configured Rendezvous Points (RPs) for IP multicast group mappings. This information is being used in the PIM Sparse mode only.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5
hpicfPimIfTable
HP extensions to the pimInterfaceTable.
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6
hpicfPimRemoveConfig
PIM is halted. This objects clears all existing PIM configuration, intializes the pim config to the default state. SnmpGet on this will always return false. An SnmpSet of false …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.8
hpicfPimStaticRpfTable
The (conceptual) table containing statically configured reverse path forwarding (RPF) source address to interface mappings. This information is currently used in the PIM sparse…
table-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9
Child Objects
ObjectTypeSyntaxOID
hpicfPimComponentEntry
HP extensions for an entry in the pimComponentTable.
row-.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1