HP-ICF-PIM Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
116

hpicfPimStaticRPSetTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimStaticRPSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimStaticRPSetTable' 
The (conceptual) table containing statically 
configured Rendezvous Points (RPs) for IP multicast 
group mappings. This information is being used 
in the PIM Sparse mode only.
hpicfPimStaticRPSetEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1
An entry (row) in the hpicfPimStaticRPSetTable.
NOTE: the pimRPSetComponent is an index that uniquely
identifies the component. Each protocol instance
connected to a separate domain should have a different
index val…
Indexes
Column Syntax OID
hpicfPimStaticRPSetGroupAddress
The IP multicast group address which, when combined
with hpicfPimStaticRPSetGroupMask, gives the group
prefix for which this entry contains information
about the statically configured RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.1
hpicfPimStaticRPSetGroupMask
The multicast group address mask which, when combined
with hpicfPimStaticRPSetGroupAddress, gives the group
prefix for which this entry contains information about
the statically configured RP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.2
hpicfPimStaticRPSetAddress
The IP address of statically configured RP for the
given IP multicast group(s).
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.3
hpicfPimStaticRPSetOverride
If true, indicates that the router should ignore the
information learned by a BSR if there is a conflict
between the information this static entry contains and
the information that is learned by the BSR.
Default is …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.4
hpicfPimStaticRPSetRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.5.1.5

hpicfPimIfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6 · 1 row entry · 21 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimIfTable' 
HP extensions to the pimInterfaceTable.
hpicfPimIfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1
HP extensions for an entry in the pimInterfaceTable.
Indexes
No indexes recorded
Column Syntax OID
hpicfPimIfAddress
This is copy of pimInterfaceAddress with read-create
access. PIM uses this source address to send its
protocol packets out on this interface. This address can
be set to one of IP addresses of the interface or
255.25…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.1
hpicfPimIfTrigHelloInterval
The maximum time before a triggered PIM Hello message
is transmitted on this interface. Default is 5 seconds.
secondsInteger32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.2
hpicfPimIfHelloHoldtime
The value set in the Holdtime field of Hello messages
transmitted on this interface. This should be 3.5
times the value of pimInterfaceHelloInterval.
Default is 105 seconds.
secondsInteger32r/w
Constraints:
range: 17-1050
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.3
hpicfPimIfLanPruneDelay
Turns the LAN Prune Delay options ON and OFF, on this
interface. Default is true.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.4
hpicfPimIfPropagationDelay
The value inserted into the LAN Prune Delay field of a
LAN Prune Delay option on this interface.
Default is 500 milliseconds.
millisecondsInteger32r/w
Constraints:
range: 250-2000
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.5
hpicfPimIfOverrideInterval
The value inserted into the Override Interval field of
a LAN Prune Delay option on this interface.
Default is 2500 milliseconds.
millisecondsInteger32r/w
Constraints:
range: 500-6000
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.6
hpicfPimIfGenerationID
Turns the Generation ID option ON and OFF, on this
interface. Default is false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.7
hpicfPimIfJoinPruneHoldtime
The value inserted into the Holdtime field of a Join/
Prune message sent on this interface. The value should
be 3.5 times pimInterfaceJoinPruneInterval.
Default is 210 seconds.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.8
hpicfPimIfGraftRetryInterval
The interval a PIM router waits for a Graft Ack before
re-sending a Graft on this interface.
Default is 3 seconds.
secondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.9
hpicfPimIfMaxGraftRetries
The maximum number of times this router will re-send a
Graft on this interface. Default is 2.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.10
hpicfPimIfSRTTLThreshold
The Time To Live in a PIM-DM State Refresh message at
which it is not forwarded on this interface. Default is 0.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.11
hpicfPimIfLanDelayEnabled
Evaluates to TRUE if all routers on this interface are
using the LAN Prune Delay Option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.12
hpicfPimIfSRCapable
Evaluates to TRUE if all routers on this interface are
using the State Refresh Capable Option.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.13
hpicfPimIfDRPriority
The Designated Router Priority inserted into the DR
priority option on this interface. Default is 1.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.14
hpicfPimIfNBRTimeout
Time interval after which the router will consider a
neighbor to not be present, if no PIM Hello messages
arrived on the interface. Default is 180 seconds.
secondsInteger32r/w
Constraints:
range: 60-8000
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.15
hpicfPimIfNBRCount
PIM Neighbor Count.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.16
hpicfPimIfNegotiatedPropagationDelay
Negotiated PIM LAN/Propagation Delay (ms).
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.17
hpicfPimIfNegotiatedOverrideInterval
Negotiated PIM Override Interval (ms).
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.18
hpicfPimIfAssertHoldInterval
PIM Assert Hold Interval (s).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.19
hpicfPimIfNumRoutersNotUsingDRPriority
Number of routers on network not using DR priority.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.20
hpicfPimIfNumRoutersNotUsingLanDelay
Number of routers on network not using LAN Delay.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.21

hpicfPimComponentTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7 · 1 row entry · 12 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimComponentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimComponentTable' 
HP extensions to the pimComponentTable - the 
(conceptual) table containing objects specific to a
PIM domain. One row exists for each domain to which 
the router is connected. Typically, a PIM-SM router 
will be a member of exactly one domain, however, the 
table also supports routers which may form a border 
between two PIM-SM domains and do not forward Bootstrap 
messages between them.
hpicfPimComponentEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1
HP extensions for an entry in the pimComponentTable.
Indexes
No indexes recorded
Column Syntax OID
hpicfPimComponentCBSRAdminStatus
This objects specifies whether or not the router
configured to be a Candidate BSR for the local
PIM region. Default is disabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.1
hpicfPimComponentCBSRAddress
The IP address the Candidate BSR router will advertise
for the local PIM region.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.2
hpicfPimComponentCBSRPriority
The priority for Candidate BSR router. In BSR election
process the candidate BSR with the highest (numerically
bigger) priority becomes the BSR. If the priority values
are the same, the router with the larger IP addre…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.3
hpicfPimComponentCBSRHashMaskLength
Specifies the length (in bits) of a multicast group
address to use when mapping a group to one of the
candidate RPs from the RP-Set whose group-prefix
includes the group. The recommended value for IPv4
is 30, for IPv…
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.4
hpicfPimComponentCBSRMessageInterval
If this router is the elected BSR, this object
is the interval for sending (multicast out) periodic
Bootstrap (RP-Set) messages on all PIM SM interfaces.
The acceptable range is 5-300. The default value of this
object…
secondsInteger32r/w
Constraints:
range: 5-65535
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.5
hpicfPimComponentCRPPriority
The priority for the Candidate RP for the local PIM
domain. Determines which Candidate RPs get selected by
the BSR to be in the RP Set. The smaller value means
the higher priority (a value of zero is the highest
pos…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.6
hpicfPimComponentCRPAdvInterval
The interval at which the Candidate RP transmits
(unicast to the elected BSR) advertise messages in
the local PIM domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.7
hpicfPimComponentBSRPriority
The priority of the Bootstrap Router (BSR) elected
for the local PIM region.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.8
hpicfPimComponentBSRHashMaskLength
The hash mask length of the elected Bootstrap
Router (BSR).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.9
hpicfPimComponentBSRUpTime
Length of time that the elected Bootstrap Router (BSR)
has been up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.10
hpicfPimComponentBSRNextMessage
Time in which the next bootstrap message is due from
the elected Bootstrap Router (BSR).
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.11
hpicfPimComponentCRPAdvTimer
Next scheduled Candidate RP Advertisement.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.7.1.12

hpicfPimStaticRpfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimStaticRpfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimStaticRpfTable' 
The (conceptual) table containing statically configured 
reverse path forwarding (RPF) source address to interface 
mappings. This information is currently used in the PIM 
sparse mode only.
hpicfPimStaticRpfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1
A row in the hpicfPimStaticRpfTable.
Indexes
Column Syntax OID
hpicfPimStaticRpfSourceAddressType
The IP address type of the statically configured
multicast source.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.1
hpicfPimStaticRpfSourceAddress
The IP address of the statically configured
multicast source.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.2
hpicfPimStaticRpfSourcePrefixLength
The prefix length of the statically
configured multicast source.
INET-ADDRESS-MIBInetAddressPrefixLength
Type Constraints:
range: 0..2040
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.3
hpicfPimStaticRpfAddressType
The type of RPF address for this route.
The value of this object must be equal to a value
appropriate for the corresponding instance of the
hpicfPimStaticRpfSourceAddressType object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.4
hpicfPimStaticRpfAddress
The IP address of the interface to use for RPF
checks.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.5
hpicfPimStaticRpfRowStatus
The status of this row, by which new entries may be
created, or old entries deleted from this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.6
hpicfPimStaticRpfOverrideState
The state of this RPF override entry.
Enumeration
Enumerated Values:
1active
2inActive
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.7
hpicfPimStaticRpfIfIndex
Index of the Interface towards the RPF neighbor.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.8
hpicfPimStaticRpfNeighborAddressType
The IP address type of the statically configured
RPF neighbor.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.9
hpicfPimStaticRpfNeighborAddress
The IP address of the static RPF Neighbor.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.9.1.10

hpicfPimMRouteTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14 · 1 row entry · 14 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimMRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimMRouteTable' 
HP extensions to rfc2932's ipMRouteEntry table.
hpicfPimMRouteEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1
HP extensions for an entry in ipMRouteEntry.
Indexes
No indexes recorded
Column Syntax OID
hpicfPimSendRegStop
Indicates that a register-stop message must be sent.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.1
hpicfPimSGSourceIsActive
Indicates whether the multicast source
corresponding to the (S,G) is active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.2
hpicfPimOutgoingRegisterIfAvailable
Indicates that a register outgoing
interface is available.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.3
hpicfPimEntryAddSuccess
Indicates that an entry has been
successfully added.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.4
hpicfPimNumOutgoingInterfaces
List of outgoing interfaces.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.5
hpicfPimDirectlyConnectedSource
Specifies PIM routing entries on routers
directly connecting to the same subnet with the
multicast source.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.6
hpicfPimNeighborSearchFailure
Specifies PIM routing entries with PIM
neighbor searching failure.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.7
hpicfPimRPTreePruneSent
Specifies PIM routing entries on RPT branches
where (S, G) prunes have been sent to the RP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.8
hpicfPimOnSPTree
Specifies PIM routing entries on the SPT.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.9
hpicfPimRPToSPTreeSwitching
Specifies PIM routing entries in the process of
RPT-to-SPT switchover.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.10
hpicfPimWildcardEntry
Specifies wildcard routing entries.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.11
hpicfPimRPFPrimeNeighborAddressType
RPF Prime Neighbor address type
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.12
hpicfPimRPFPrimeNeighborAddress
RPF Prime Neighbor address
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.13
hpicfPimNumDownstreams
Total number of downstreams.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.14.1.14

hpicfPimNeighborTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimNeighborTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimNeighborTable' 
HP extensions to the pimNeighborTable.
hpicfPimNeighborEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1
HP extensions for an entry in the pimNeighborTable.
Indexes
No indexes recorded
Column Syntax OID
hpicfPimNeighborDRPriority
PIM Neighbor Router's Designated Router Priority value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1.1
hpicfPimNeighborGenerationIDValue
PIM Neighbor Router's Generation ID value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1.2
hpicfPimNeighborHoldtime
PIM Neighbor Router's Hold Time value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1.3
hpicfPimNeighborPropagationDelay
PIM Neighbor Router's LAN Delay value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1.4
hpicfPimNeighborOverrideInterval
PIM Neighbor Router's Override Interval value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1.5
hpicfPimNeighborStateRefreshInterval
PIM Neighbor Router's State Refresh Interval value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.16.1.6

hpicfPimUcastRouteTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimUcastRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimUcastRouteTable' 
Cached Unicast Route related to PIM.
hpicfPimUcastRouteEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1
An entry in pimUcastRouteTable.
Indexes
Column Syntax OID
hpicfPimUcastRouteAddressType
Address family of a Unicast IP Address
of a Source or network.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.1
hpicfPimUcastRouteAddress
Unicast IP Address of a Source or network.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.2
hpicfPimUcastRoutePrefix
Network Prefix length in bits of the address.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.3
hpicfPimUcastRouteIfIndex
Index of the Interface towards the source/network.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.4
hpicfPimUcastRouteUpstreamNbrType
Address type of the PIM neighbor on
Interface towards the source/network.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.5
hpicfPimUcastRouteUpstreamNbr
Address of the PIM neighbor on the
Interface towards the source/network.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.6
hpicfPimUcastRouteProtocol
Unicast routing protocol through which the route
was learned.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.17.1.7

hpicfPimJoinPruneTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimJoinPruneTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimJoinPruneTable' 
Info on Join-Prune messages to send
hpicfPimJoinPruneEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1
An entry in hpicfPimJoinPruneTable.
Indexes
Column Syntax OID
hpicfPimJoinPruneInterface
Interface on which Join-Prune messages will be sent.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.1
hpicfPimJoinPruneInterfaceState
Flag indicating a (S,G)/(*,G) join
or (S,G,Rpt) prune.
Enumeration
Enumerated Values:
1join
2prune
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.2
hpicfPimJoinPruneSourceType
Flow source address type for a (S,G) join
or (S,G,Rpt) prune.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.3
hpicfPimJoinPruneSourceAddress
Flow source address for a (S,G) join
or (S,G,Rpt) prune.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.4
hpicfPimJoinPruneGroupType
Flow group address type for a (S,G)/(*,G)
join or (S,G,Rpt) prune.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.5
hpicfPimJoinPruneGroupAddress
Flow group address for a (S,G)/(*,G) join
or (S,G,Rpt) prune.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.6
hpicfPimJoinPruneNeighborAddressType
PIM neighbor router address type towards the
source/RP to which Join-Prune messages are sent.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.7
hpicfPimJoinPruneNeighborAddress
PIM neighbor router address towards the source/RP
to which Join-Prune messages are sent.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.8
hpicfPimJoinPruneExpiryTime
Expiry time of sending Join-Prune messages.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.18.1.9

hpicfPimRPSetTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimRPSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimRPSetTable' 
Extensions to rfc2943's pimRPSetTable.
hpicfPimRPSetEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19.1
An entry in pimUcastRouteTable.
Indexes
No indexes recorded
Column Syntax OID
hpicfPimRPSetPriority
RP Set Priority.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19.1.1
hpicfPimRPSetUptime
Time RP has been up.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.19.1.2

hpicfPimIfMessageCounterTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20 · 1 row entry · 24 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimIfMessageCounterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimIfMessageCounterTable' 
Table of per-interface message counters.
hpicfPimIfMessageCounterEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1
An entry in hpicfPimIfMessageCounterTable.
Indexes
Column Syntax OID
hpicfPimIfMsgCountAssertReceive
Per-interface count of
received Assert messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.1
hpicfPimIfMsgCountAssertTransmit
Per-interface count of
transmitted Assert messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.2
hpicfPimIfMsgCountAssertInvalid
Per-interface count of invalid
Assert messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.3
hpicfPimIfMsgCountGraftReceive
Per-interface count of
received Graft messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.4
hpicfPimIfMsgCountGraftTransmit
Per-interface count of
transmitted Graft messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.5
hpicfPimIfMsgCountGraftInvalid
Per-interface count of invalid
Graft messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.6
hpicfPimIfMsgCountGraftAckReceive
Per-interface count of
received Graft-Ack messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.7
hpicfPimIfMsgCountGraftAckTransmit
Per-interface count of
transmitted Graft-Ack messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.8
hpicfPimIfMsgCountGraftAckInvalid
Per-interface count of invalid
Graft-Ack messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.9
hpicfPimIfMsgCountHelloReceive
Per-interface count of
received HELLO messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.10
hpicfPimIfMsgCountHelloTransmit
Per-interface count of
transmitted HELLO messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.11
hpicfPimIfMsgCountHelloInvalid
Per-interface count of invalid
HELLO messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.12
hpicfPimIfMsgCountJPReceive
Per-interface count of
received Join-Prune messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.13
hpicfPimIfMsgCountJPTransmit
Per-interface count of
transmitted Join-Prune messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.14
hpicfPimIfMsgCountJPInvalid
Per-interface count of invalid
Join-Prune messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.15
hpicfPimIfMsgCountSRReceive
Per-interface count of
received State-Refresh messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.16
hpicfPimIfMsgCountSRTransmit
Per-interface count of transmitted
State-Refresh messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.17
hpicfPimIfMsgCountSRInvalid
Per-interface count of invalid
State-Refresh messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.18
hpicfPimIfMsgCountBSRReceive
Per-interface count of
received BSR messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.19
hpicfPimIfMsgCountBSRTransmit
Per-interface count of
transmitted BSR messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.20
hpicfPimIfMsgCountBSRInvalid
Per-interface count of invalid
BSR messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.21
hpicfPimIfMsgCountCRPReceive
Per-interface count of
received Candidate-RP messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.22
hpicfPimIfMsgCountCRPTransmit
Per-interface count of
transmitted Candidate-RP messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.23
hpicfPimIfMsgCountCRPInvalid
Per-interface count of invalid
Candidate-RP messages received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.20.1.24

hpicfPimUnackGraftsTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfPimUnackGraftsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-PIM' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-PIM::hpicfPimUnackGraftsTable' 
Information about unacknowledged graft messages on the network.
hpicfPimUnackGraftsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1
An entry in hpicfPimUnackGraftsTable.
Indexes
Column Syntax OID
hpicfPimUnackGraftSourceType
Flow Source address type for an unacknowledged
Graft message on the network.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1.1
hpicfPimUnackGraftSource
Flow Source address for an unacknowledged
Graft message on the network.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1.2
hpicfPimUnackGraftGroupType
Flow Group address type for an unacknowledged
Graft message on the network.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1.3
hpicfPimUnackGraftGroup
Flow Group address for an unacknowledged graft
message on the network.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1.4
hpicfPimUnackGraftAge
Time in which the graft message
will be timed-out.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1.5
hpicfPimUnackGraftRetransIn
Time in which the graft message
will be retransmitted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.21.1.6