hmRS2OperMode
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.1.10.1
Object
scalar
Enumeration
hmRS2OperMode shows the operational mode of the system: normal: normal mode, standby-active: standby mode, but switch is active, because the master switch is e.g. not reachable, standby-inactive: stand by mode, redundancy-manager-active: redundancy mode and redundancy-manager has closed RS2 ring, redundancy-manager-inactive: redundancy mode and redundancy-manager has opened RS2 ring. If the value changes, a trap is sent.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.1.10.1- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hmRS2ext
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | reset |
3 | resetStats |
4 | resetFDB |
5 | resetARP |
6 | resetL3Stats |
7 | resetL4-7Stats |
10 | hotRestart |
12 | gbl-reset |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmRS2SigRelayGroup | node | - | .1.3.6.1.4.1.248.14.1.10.10 |
| hmRS2VlanGroup | node | - | .1.3.6.1.4.1.248.14.1.10.11 |
| hmRS2SelftestGroup | node | - | .1.3.6.1.4.1.248.14.1.10.12 |
| hmRS2PSGroup | node | - | .1.3.6.1.4.1.248.14.1.10.13 |
| hmRS2RedundancyGroup | node | - | .1.3.6.1.4.1.248.14.1.10.14 |
| hmRS4RGroup | node | - | .1.3.6.1.4.1.248.14.1.10.15 |
| hmRS2FDBGroup | node | - | .1.3.6.1.4.1.248.14.1.10.16 |
| hmRS2ConfigError RS2hmConfigError indicates a configuration error of the
system:
no error: no configuration error,
error: in normal mode hmConfigError indicates failure of
control line or c… | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.10.2 |
| hmRS2SigRelayState hmRS2SigRelayState shows the state of the (non potential)
signalling relay in standard mode:
off: ok,
on: powersupply not ok or linkstate of a port not ok or
configuration err… | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.10.3 |
| hmSigLinkTable This table contains all variables to mask an alarm for the
signalling relay, produced by a link. The index for a link
corresponds with ifMauIfIndex. | table | - | .1.3.6.1.4.1.248.14.1.10.4 |
| hmSigTrapReason This object identifies the reason for a trap. There are
three reasons for a trap:
hmRS2ConfigError
ifMauMediaAvailable
hmPSState
The entity which produces the trap, is speci… | scalar | ObjectIdentifier | .1.3.6.1.4.1.248.14.1.10.5 |
| hmSigReasonIndex This attribute specifies the entity which produces the trap.
1 - n: index of powersupply table / interfaces table
0: config-error. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.10.6 |
| hmRS2TopologyGroup | node | - | .1.3.6.1.4.1.248.14.1.10.7 |
| hmRS2ConnectionMirroringGroup | node | - | .1.3.6.1.4.1.248.14.1.10.8 |
| hmRS2DisableLearningGroup | node | - | .1.3.6.1.4.1.248.14.1.10.9 |