hmRS2ext
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.1.10
Object
node
No description available.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.1.10- Type
- node
- Parent
- hmChassis
- Siblings
- 8
- Children
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmChassisEvent The events of hmChassis. | node | - | .1.3.6.1.4.1.248.14.1.0 |
| hmSystemTable | node | - | .1.3.6.1.4.1.248.14.1.1 |
| hmMACH3ChassisExt | node | - | .1.3.6.1.4.1.248.14.1.11 |
| hmAUIGroup | node | - | .1.3.6.1.4.1.248.14.1.12 |
| hmPSTable This table contains all variables related to the power supply
units of the chassis/switch. For each power supply slot exists
one instance. | table | - | .1.3.6.1.4.1.248.14.1.2 |
| hmFanTable This table contains all variables related to the fan units
of the chassis/switch. For each fan slot exists one instance. | table | - | .1.3.6.1.4.1.248.14.1.3 |
| hmFwdPriorityConfiguration | node | - | .1.3.6.1.4.1.248.14.1.4 |
| hmCurrentAddressTable A table containing filtering information
configured into the bridge by (local or network)
management or dynamic by GMRP or IGMP Snooping
specifying the set of ports to which
frame… | table | - | .1.3.6.1.4.1.248.14.1.5 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmRS2OperMode hmRS2OperMode shows the operational mode of the system:
normal: normal mode,
standby-active: standby mode, but switch is active, because
the master switch is e.g. not … | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.10.1 |
| hmRS2SigRelayGroup | node | - | .1.3.6.1.4.1.248.14.1.10.10 |
| hmRS2VlanGroup | node | - | .1.3.6.1.4.1.248.14.1.10.11 |
| hmRS2SelftestGroup | node | - | .1.3.6.1.4.1.248.14.1.10.12 |
| hmRS2PSGroup | node | - | .1.3.6.1.4.1.248.14.1.10.13 |
| hmRS2RedundancyGroup | node | - | .1.3.6.1.4.1.248.14.1.10.14 |
| hmRS4RGroup | node | - | .1.3.6.1.4.1.248.14.1.10.15 |
| hmRS2FDBGroup | node | - | .1.3.6.1.4.1.248.14.1.10.16 |
| hmRS2ConfigError RS2hmConfigError indicates a configuration error of the
system:
no error: no configuration error,
error: in normal mode hmConfigError indicates failure of
control line or c… | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.10.2 |
| hmRS2SigRelayState hmRS2SigRelayState shows the state of the (non potential)
signalling relay in standard mode:
off: ok,
on: powersupply not ok or linkstate of a port not ok or
configuration err… | scalar | Enumeration | .1.3.6.1.4.1.248.14.1.10.3 |
| hmSigLinkTable This table contains all variables to mask an alarm for the
signalling relay, produced by a link. The index for a link
corresponds with ifMauIfIndex. | table | - | .1.3.6.1.4.1.248.14.1.10.4 |
| hmSigTrapReason This object identifies the reason for a trap. There are
three reasons for a trap:
hmRS2ConfigError
ifMauMediaAvailable
hmPSState
The entity which produces the trap, is speci… | scalar | ObjectIdentifier | .1.3.6.1.4.1.248.14.1.10.5 |
| hmSigReasonIndex This attribute specifies the entity which produces the trap.
1 - n: index of powersupply table / interfaces table
0: config-error. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.1.10.6 |
| hmRS2TopologyGroup | node | - | .1.3.6.1.4.1.248.14.1.10.7 |
| hmRS2ConnectionMirroringGroup | node | - | .1.3.6.1.4.1.248.14.1.10.8 |
| hmRS2DisableLearningGroup | node | - | .1.3.6.1.4.1.248.14.1.10.9 |