hmNetSNTPOperStatus
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.3.30.11
Object
scalar
SNMPv2-SMIInteger32
Operational status of the SNTP sub-system. The value is a bit mask: 0 SNTP disabled 1 local system clock synchronized 2 SNTP loop detected 4 generic error 8 once synced, client disabled 100 server 1 not synchronized 200 server 1 bad protocol version 400 server 1 not responding 10000 server 2 not synchronized 20000 server 2 bad protocol version 40000 server 2 not responding (Note that all values are hexadecimal.)
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.3.30.11- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hmNetSNTPGroup
- Siblings
- 15
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetSNTPStatus Enables/disables the Simple Network Time Protocol
on this device. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.1 |
| hmNetSNTPAnycastInterval Interval of SNTP broadcast messages in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.10 |
| hmNetSNTPTimeAdjustThreshold The threshold in milli-seconds whether to decide to set the received
SNTP time directly to the local clock or not. If the hmNetSNTPTimeAdjustThreshold
value is 0, the received SN… | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.12 |
| hmNetSNTPOnceAtStartup If enabled, SNTP ist automaticaly disabled after once synchronized to an SNTP Server. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.13 |
| hmNetSNTPServerOnlyIfSync The SNTP server is enabled only if synchronized to another external time reference. (e.g. SNTP or PTP) | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.14 |
| hmNetSNTPServerStatus Enables/disables the SNTP server on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.15 |
| hmNetSNTPClientStatus Enables/disables the SNTP client on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.16 |
| hmNetSNTPServer The IP Address of an external Time Server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.2 |
| hmNetSNTPTime The time in seconds since 01/01/1900 UTC. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.14.2.3.30.3 |
| hmNetSNTPLocalOffset The difference between local time and UTC in minutes. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.4 |
| hmNetSNTPServer2 IP address of a secondary (backup) time server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.5 |
| hmNetSNTPSyncInterval SNTP synchronisation interval in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.6 |
| hmNetSNTPAcceptBroadcasts This MIB variable specifies whether SNTP broadcasts will
be allowed to synchronize the local clock.
If hmNetSNTPStatus is enabled,
this variable will be ignored and broadcasts wil… | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.7 |
| hmNetSNTPAnycastAddr Destination address for SNTP broadcasts.
A broadcast, multicast or unicast address may be specified.
Setting the address to 0.0.0.0 disables SNTP broadcasts. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.8 |
| hmNetSNTPAnycastVlan Vlan for anycast mode. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.9 |