hmNetSNTPGroup
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.3.30
Object
node
No description available.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.3.30- Type
- node
- Parent
- hmNetwork
- Siblings
- 21
- Children
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetLocalIPAddr IP address of the management agent board.
Changing this value will take effect after activating with hmNetAction. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.1 |
| hmNetVlanPriority Vlan Priority which is used in management replies. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.10 |
| hmNetIpDscpPriority IP DSCP value which is used in management replies. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.11 |
| hmNetACDGroup | node | - | .1.3.6.1.4.1.248.14.2.3.12 |
| hmNetMacACDGroup | node | - | .1.3.6.1.4.1.248.14.2.3.13 |
| hmNetLocalPhysAddr Physical base address (MAC-address) of the agent. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.248.14.2.3.2 |
| hmNetHiDiscoveryGroup | node | - | .1.3.6.1.4.1.248.14.2.3.20 |
| hmNetGatewayIPAddr IP address of the default gateway.
Changing this value will take effect after activating with hmNetAction. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.3 |
| hmNetNTPGroup | node | - | .1.3.6.1.4.1.248.14.2.3.31 |
| hmNetMask Subnet mask.
Changing this value will take effect after activating with hmNetAction. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.4 |
| hmNetPTPGroup | node | - | .1.3.6.1.4.1.248.14.2.3.40 |
| hmNetPTP2Group | node | - | .1.3.6.1.4.1.248.14.2.3.41 |
| hmNetPTP2TCGroup | node | - | .1.3.6.1.4.1.248.14.2.3.42 |
| hmNetPPPBaseIPAddr Base address of the IP address range used by the
point-to-point protocol. The IP addresses
hmNetPPPBaseAddress..hmNetPPPBaseAddress+4 are assigned
to the client machines attached … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.5 |
| hmNetSNMPGroup | node | - | .1.3.6.1.4.1.248.14.2.3.50 |
| hmNetPPPNetMask Subnet mask used by the point-to-point protocol.
Changing this variable on one agent automatically updates
the value on the other agents in the same chassis. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.6 |
| hmNetGPSGroup | node | - | .1.3.6.1.4.1.248.14.2.3.60 |
| hmNetAction This object, when read, always returns a value of other(1).
Setting the object to activate(2) causes a reconfiguration
of the IP protocol stack with the current values of
hmNetLo… | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.7 |
| hmRestrictedMgtAccessGroup | node | - | .1.3.6.1.4.1.248.14.2.3.70 |
| hmNetVlanID Vlan ID of the IP protocol stack. If the value is 0,
Traffic from all Vlans is accepted. Every other value means
that only traffic of the appropriate Vlan is accepted and outgoing… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.8 |
| hmNetLocalPhysAddrRange The number of MAC addresses reserved for this device, starting from hmNetLocalPhysAddr. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetSNTPStatus Enables/disables the Simple Network Time Protocol
on this device. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.1 |
| hmNetSNTPAnycastInterval Interval of SNTP broadcast messages in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.10 |
| hmNetSNTPOperStatus Operational status of the SNTP sub-system.
The value is a bit mask:
0 SNTP disabled
1 local system clock synchronized
2 SNTP loop detected
4 generic error
8 on… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.30.11 |
| hmNetSNTPTimeAdjustThreshold The threshold in milli-seconds whether to decide to set the received
SNTP time directly to the local clock or not. If the hmNetSNTPTimeAdjustThreshold
value is 0, the received SN… | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.12 |
| hmNetSNTPOnceAtStartup If enabled, SNTP ist automaticaly disabled after once synchronized to an SNTP Server. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.13 |
| hmNetSNTPServerOnlyIfSync The SNTP server is enabled only if synchronized to another external time reference. (e.g. SNTP or PTP) | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.14 |
| hmNetSNTPServerStatus Enables/disables the SNTP server on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.15 |
| hmNetSNTPClientStatus Enables/disables the SNTP client on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.16 |
| hmNetSNTPServer The IP Address of an external Time Server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.2 |
| hmNetSNTPTime The time in seconds since 01/01/1900 UTC. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.14.2.3.30.3 |
| hmNetSNTPLocalOffset The difference between local time and UTC in minutes. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.4 |
| hmNetSNTPServer2 IP address of a secondary (backup) time server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.5 |
| hmNetSNTPSyncInterval SNTP synchronisation interval in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.6 |
| hmNetSNTPAcceptBroadcasts This MIB variable specifies whether SNTP broadcasts will
be allowed to synchronize the local clock.
If hmNetSNTPStatus is enabled,
this variable will be ignored and broadcasts wil… | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.7 |
| hmNetSNTPAnycastAddr Destination address for SNTP broadcasts.
A broadcast, multicast or unicast address may be specified.
Setting the address to 0.0.0.0 disables SNTP broadcasts. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.8 |
| hmNetSNTPAnycastVlan Vlan for anycast mode. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.9 |