hmNetSNTPAnycastInterval
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.3.30.10
Object
scalar
r/w
Integer32
Interval of SNTP broadcast messages in seconds.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.3.30.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hmNetSNTPGroup
- Siblings
- 15
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetSNTPStatus Enables/disables the Simple Network Time Protocol
on this device. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.1 |
| hmNetSNTPOperStatus Operational status of the SNTP sub-system.
The value is a bit mask:
0 SNTP disabled
1 local system clock synchronized
2 SNTP loop detected
4 generic error
8 on… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.30.11 |
| hmNetSNTPTimeAdjustThreshold The threshold in milli-seconds whether to decide to set the received
SNTP time directly to the local clock or not. If the hmNetSNTPTimeAdjustThreshold
value is 0, the received SN… | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.12 |
| hmNetSNTPOnceAtStartup If enabled, SNTP ist automaticaly disabled after once synchronized to an SNTP Server. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.13 |
| hmNetSNTPServerOnlyIfSync The SNTP server is enabled only if synchronized to another external time reference. (e.g. SNTP or PTP) | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.14 |
| hmNetSNTPServerStatus Enables/disables the SNTP server on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.15 |
| hmNetSNTPClientStatus Enables/disables the SNTP client on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.16 |
| hmNetSNTPServer The IP Address of an external Time Server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.2 |
| hmNetSNTPTime The time in seconds since 01/01/1900 UTC. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.14.2.3.30.3 |
| hmNetSNTPLocalOffset The difference between local time and UTC in minutes. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.4 |
| hmNetSNTPServer2 IP address of a secondary (backup) time server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.5 |
| hmNetSNTPSyncInterval SNTP synchronisation interval in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.6 |
| hmNetSNTPAcceptBroadcasts This MIB variable specifies whether SNTP broadcasts will
be allowed to synchronize the local clock.
If hmNetSNTPStatus is enabled,
this variable will be ignored and broadcasts wil… | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.7 |
| hmNetSNTPAnycastAddr Destination address for SNTP broadcasts.
A broadcast, multicast or unicast address may be specified.
Setting the address to 0.0.0.0 disables SNTP broadcasts. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.8 |
| hmNetSNTPAnycastVlan Vlan for anycast mode. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.9 |