hmNetSNTPAcceptBroadcasts
HMPRIV-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.2.3.30.7
Object
scalar
r/w
Enumeration
This MIB variable specifies whether SNTP broadcasts will be allowed to synchronize the local clock. If hmNetSNTPStatus is enabled, this variable will be ignored and broadcasts will not set the local clock.
Context
- MIB
- HMPRIV-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.2.3.30.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hmNetSNTPGroup
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmNetSNTPStatus Enables/disables the Simple Network Time Protocol
on this device. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.1 |
| hmNetSNTPAnycastInterval Interval of SNTP broadcast messages in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.10 |
| hmNetSNTPOperStatus Operational status of the SNTP sub-system.
The value is a bit mask:
0 SNTP disabled
1 local system clock synchronized
2 SNTP loop detected
4 generic error
8 on… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.2.3.30.11 |
| hmNetSNTPTimeAdjustThreshold The threshold in milli-seconds whether to decide to set the received
SNTP time directly to the local clock or not. If the hmNetSNTPTimeAdjustThreshold
value is 0, the received SN… | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.12 |
| hmNetSNTPOnceAtStartup If enabled, SNTP ist automaticaly disabled after once synchronized to an SNTP Server. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.13 |
| hmNetSNTPServerOnlyIfSync The SNTP server is enabled only if synchronized to another external time reference. (e.g. SNTP or PTP) | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.14 |
| hmNetSNTPServerStatus Enables/disables the SNTP server on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.15 |
| hmNetSNTPClientStatus Enables/disables the SNTP client on this device if hmNetSNTPStatus is enabled. | scalar | Enumeration | .1.3.6.1.4.1.248.14.2.3.30.16 |
| hmNetSNTPServer The IP Address of an external Time Server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.2 |
| hmNetSNTPTime The time in seconds since 01/01/1900 UTC. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.14.2.3.30.3 |
| hmNetSNTPLocalOffset The difference between local time and UTC in minutes. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.4 |
| hmNetSNTPServer2 IP address of a secondary (backup) time server. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.5 |
| hmNetSNTPSyncInterval SNTP synchronisation interval in seconds. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.6 |
| hmNetSNTPAnycastAddr Destination address for SNTP broadcasts.
A broadcast, multicast or unicast address may be specified.
Setting the address to 0.0.0.0 disables SNTP broadcasts. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.2.3.30.8 |
| hmNetSNTPAnycastVlan Vlan for anycast mode. | scalar | Integer32 | .1.3.6.1.4.1.248.14.2.3.30.9 |