hm2DlrService

HM2-L2REDUNDANCY-DLR-MIB · .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.12
MIB view Table view

Object

column r/w Enumeration 
DLR specific services. 
noService(0) will be returned when reading this attribute.
verifyFaultLocation(1) causes the supervisor to verify fault location. 
clearRapidFaults(2) clears the Rapid Fault condition in the supervisor,
allowing the supervisor to return to normal operation.
restartSignOn(3) restarts the Sign On process and refreshes the participants list.
clearGatewayPartialFault(4) clears the partial network fault condition in the gateway,
allowing the gateway to return to normal operation.
clearGatewayPartialFault(4) is only supported if device is capable of the gateway.

Context

MIB
HM2-L2REDUNDANCY-DLR-MIB
OID
.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.12
Type
column
Access
readwrite
Status
current
Parent
hm2DlrConfigEntry
Table
hm2DlrConfigTable
Siblings
12

Syntax

Enumeration

Values & Constraints

Enumerated Values
0noService
1verifyFaultLocation
2clearRapidFaults
3restartSignOn
4clearGatewayPartialFault

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2DlrRingIndex
DLR ring index.
columnUnsigned32.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.1
hm2DlrBeaconTimeout
Beacon timeout in microseconds. The Beacon Timeout shall be at least two times the Beacon Interval value.
columnUnsigned32.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10
hm2DlrVLANID
VLAN ID to use in the DLR protocol messages.
columnUnsigned32.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.11
hm2DlrConfigRowStatus
Describes the status of a row in the table. Supports creation, deletion and activation of rows. A row must not be active(1) in order to be modified. A row can be taken out of serv…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.15
hm2DlrRingName
A logical name for the DLR ring to ease the management of DLR rings.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.2
hm2DlrRingport1IfIndex
Interface index of the ringport 1 in the DLR ring. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.3
hm2DlrRingport2IfIndex
Interface index of the ringport 2 in the DLR ring. A non-zero value indicates the ifIndex for the corresponding entry in the ifTable.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.4
hm2DlrRingport1OperStatus
Operational status of ringport 1.
columnHm2DlrPortStatusType.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.5
hm2DlrRingport2OperStatus
Operational status of ringport 2.
columnHm2DlrPortStatusType.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.6
hm2DlrSupervisorAdminState
Enable or disable the supervisor function. enable(1) indicates the device is configured as a ring supervisor. disable(2) indicates the device is configured as a normal ring node.
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.7
hm2DlrSupervisorPrecedence
Precedence of the ring supervisor. Numerically higher value indicates higher precedence.
columnUnsigned32.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.8
hm2DlrBeaconInterval
Beacon interval time in microseconds.
columnUnsigned32.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.9