HM2-L2REDUNDANCY-DLR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hm2DlrConfigTable

table

.1.3.6.1.4.1.248.11.40.1.5.1.1.10 · 1 row entry · 13 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DlrConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-L2REDUNDANCY-DLR-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-L2REDUNDANCY-DLR-MIB::hm2DlrConfigTable'

DLR configuration parameters table.

hm2DlrConfigEntry row .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1

Entry for DLR configuration parameters.

Indexes

hm2DlrRingIndex

Column Syntax OID

hm2DlrRingIndex

DLR ring index.

Unsigned32

Constraints:
range: 1-255

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.1

hm2DlrRingName

A logical name for the DLR ring to ease the
management of DLR rings.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.2

hm2DlrRingport1IfIndex

Interface index of the ringport 1 in the DLR ring.
A non-zero value indicates the ifIndex for the
corresponding entry in the ifTable.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.3

hm2DlrRingport2IfIndex

Interface index of the ringport 2 in the DLR ring.
A non-zero value indicates the ifIndex for the
corresponding entry in the ifTable.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.4

hm2DlrRingport1OperStatus

Operational status of ringport 1.

Hm2DlrPortStatusType

Type Values:

1	disabled
2	blocked
3	forwarding
4	notConnected

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.5

hm2DlrRingport2OperStatus

Operational status of ringport 2.

Hm2DlrPortStatusType

Type Values:

1	disabled
2	blocked
3	forwarding
4	notConnected

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.6

hm2DlrSupervisorAdminState

Enable or disable the supervisor function.
enable(1) indicates the device is configured
as a ring supervisor.
disable(2) indicates the device is configured
as a normal ring node.

HM2-TC-MIBHmEnabledStatusr/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.7

hm2DlrSupervisorPrecedence

Precedence of the ring supervisor.
Numerically higher value indicates higher precedence.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.8

hm2DlrBeaconInterval

Beacon interval time in microseconds.

Unsigned32r/w

Constraints:
range: 400-100000

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.9

hm2DlrBeaconTimeout

Beacon timeout in microseconds.
The Beacon Timeout shall be at least two times the Beacon Interval value.

Unsigned32r/w

Constraints:
range: 800-500000

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10

hm2DlrVLANID

VLAN ID to use in the DLR protocol messages.

Unsigned32r/w

Constraints:
range: 0-4042

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.11

hm2DlrService

DLR specific services.
noService(0) will be returned when reading this attribute.
verifyFaultLocation(1) causes the supervisor to verify fault location.
clearRapidFaults(2) clears the Rapid Fault condition in the supe…

Enumerationr/w

Enumerated Values:

0	noService
1	verifyFaultLocation
2	clearRapidFaults
3	restartSignOn
4	clearGatewayPartialFault

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.12

hm2DlrConfigRowStatus

Describes the status of a row in the table.
Supports creation, deletion and activation of rows.
A row must not be active(1) in order to be modified.
A row can be taken out of service by setting the value
notInService(2).

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.15

hm2DlrGatewayConfigTable

table

.1.3.6.1.4.1.248.11.40.1.5.1.1.11 · 1 row entry · 11 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DlrGatewayConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-L2REDUNDANCY-DLR-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-L2REDUNDANCY-DLR-MIB::hm2DlrGatewayConfigTable'

Gateway settings table.

hm2DlrGatewayConfigEntry row .1.3.6.1.4.1.248.11.40.1.5.1.1.11.1

Entry with DLR gateway settings for the indexed ring.

Indexes

hm2DlrRingIndex hm2DlrGatewayIndex

Column Syntax OID

hm2DlrGatewayIndex

DLR gateway index.

Unsigned32

Constraints:
range: 1-255

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.1

hm2DlrGatewayName

A logical name for the DLR gateway to ease the
management of DLR gateways.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.2

hm2DlrGatewayConfigLearningUpdate

Enable or disable DLR gateway learning update.
enable(1) indicates all DLR nodes will send
Learning_Update frame after gateway switchover.
disable(2) indicates DLR nodes will not send
Learning_Update frame after gatew…

HM2-TC-MIBHmEnabledStatusr/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.3

hm2DlrGatewayConfigPrecedence

Precedence of the DLR gateway.

Unsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.4

hm2DlrGatewayConfigAdvertiseInterval

Gateway advertise interval time in microseconds.

Unsigned32r/w

Constraints:
range: 1000-100000

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.5

hm2DlrGatewayConfigAdvertiseTimeout

Gateway advertise timeout in microseconds.

Unsigned32r/w

Constraints:
range: 2500-500000

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.6

hm2DlrGatewayConfigUplinkPort1IfIndex

Interface index of the uplink port 1 of the DLR
gateway.
A non-zero value indicates the ifIndex for the
corresponding entry in the ifTable.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.7

hm2DlrGatewayConfigUplinkPort2IfIndex

Interface index of the uplink port 2 of the DLR
gateway.
A non-zero value indicates the ifIndex for the
corresponding entry in the ifTable.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.8

hm2DlrGatewayUplinkPort1OperStatus

Operational status of the gateway uplink port 1.

Hm2DlrPortStatusType

Type Values:

1	disabled
2	blocked
3	forwarding
4	notConnected

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.9

hm2DlrGatewayUplinkPort2OperStatus

Operational status of the gateway uplink port 2.

Hm2DlrPortStatusType

Type Values:

1	disabled
2	blocked
3	forwarding
4	notConnected

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.10

hm2DlrGatewayConfigRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.1.11.1.15

hm2DlrStatusTable

table

.1.3.6.1.4.1.248.11.40.1.5.1.2.1 · 1 row entry · 17 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DlrStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-L2REDUNDANCY-DLR-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-L2REDUNDANCY-DLR-MIB::hm2DlrStatusTable'

DLR runtime status table.

hm2DlrStatusEntry row .1.3.6.1.4.1.248.11.40.1.5.1.2.1.1

DLR runtime status entry.

Indexes

hm2DlrRingIndex

Column Syntax OID

hm2DlrCapabilityFlags

DLR device capabilities.

Bits

Enumerated Values:

0	announce
1	beacon
5	supervisor
6	gateway
7	flushTable

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.1

hm2DlrDeviceOperStatus

Operational status of the device in the DLR ring.

Hm2DlrRingDeviceStatusType

Type Values:

0	backup
1	supervisor
2	node
3	nonDlr
4	unsupported

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.2

hm2DlrNetworkTopology

Current network topology mode.

Hm2DlrNetworkTopologyType

Type Values:

0	linear
1	ring

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.3

hm2DlrNetworkStatus

Current network status.

Hm2DlrNetworkStatusType

Type Values:

0	normal
1	ringFault
2	loop
3	partial
4	rapidFault

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.4

hm2DlrLastNetworkStatusChange

The time in seconds since the network status has changed at last.

secondsHm2DlrTimeInterval

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.5

hm2DlrRingParticipantsCount

Number of devices in the ring protocol participiants list.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.6

hm2DlrActiveSupervisorIpAddressType

Address type of hm2DlrActiveSupervisorIpAddress.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.7

hm2DlrActiveSupervisorIpAddress

IP address of the active ring supervisor.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.8

hm2DlrActiveSupervisorMacAddress

MAC address of the active ring supervisor.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.9

hm2DlrActiveSupervisorPrecedence

Precedence value of the active ring supervisor.

Unsigned32

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.10

hm2DlrRingFaultsCount

Number of times since the supervisor has started,
that the device has detected a ring fault,
as either active or backup supervisor.

Unsigned32

Constraints:
range: 0-65535

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.11

hm2DlrLastActiveNodePort1IpAddressType

Address type of hm2DlrLastActiveNodePort1IpAddress.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.12

hm2DlrLastActiveNodePort1IpAddress

IP address of last active node on port 1.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.13

hm2DlrLastActiveNodePort1MacAddress

MAC address of last active node on port 1.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.14

hm2DlrLastActiveNodePort2IpAddressType

Address type of hm2DlrLastActiveNodePort2IpAddress.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.15

hm2DlrLastActiveNodePort2IpAddress

IP address of last active node on port 2.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.16

hm2DlrLastActiveNodePort2MacAddress

MAC address of last active node on port 2.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.2.1.1.17

hm2DlrRingParticipantsTable

table

.1.3.6.1.4.1.248.11.40.1.5.1.2.2 · 1 row entry · 4 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DlrRingParticipantsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-L2REDUNDANCY-DLR-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-L2REDUNDANCY-DLR-MIB::hm2DlrRingParticipantsTable'

DLR ring participants table.

hm2DlrRingParticipantsEntry row .1.3.6.1.4.1.248.11.40.1.5.1.2.2.1

List of devices participating in the ring protocol.

Indexes

hm2DlrRingIndex hm2DlrRingParticipantsIndex

Column Syntax OID

hm2DlrRingParticipantsIndex

Index for the ring participants table.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.1

hm2DlrRingParticipantsIpAddressType

Address type of hm2DlrRingParticipantsIpAddress.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.2

hm2DlrRingParticipantsIpAddress

IP address of the participant node.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.3

hm2DlrRingParticipantsMacAddress

MAC address of the participant node.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.248.11.40.1.5.1.2.2.1.4

hm2DlrGatewayStatusTable

table

.1.3.6.1.4.1.248.11.40.1.5.1.2.3 · 1 row entry · 5 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2DlrGatewayStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-L2REDUNDANCY-DLR-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-L2REDUNDANCY-DLR-MIB::hm2DlrGatewayStatusTable'