hm2DlrConfigEntry
HM2-L2REDUNDANCY-DLR-MIB ·
.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1
Object
row
Entry for DLR configuration parameters.
Context
- MIB
- HM2-L2REDUNDANCY-DLR-MIB
- OID
.1.3.6.1.4.1.248.11.40.1.5.1.1.10.1- Type
- row
- Status
- current
- Parent
- hm2DlrConfigTable
- Table
- hm2DlrConfigTable
- Children
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DlrRingIndex DLR ring index. | column | Unsigned32 | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.1 |
| hm2DlrBeaconTimeout Beacon timeout in microseconds.
The Beacon Timeout shall be at least two times the Beacon Interval value. | column | Unsigned32 | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.10 |
| hm2DlrVLANID VLAN ID to use in the DLR protocol messages. | column | Unsigned32 | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.11 |
| hm2DlrService DLR specific services.
noService(0) will be returned when reading this attribute.
verifyFaultLocation(1) causes the supervisor to verify fault location.
clearRapidFaults(2) clea… | column | Enumeration | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.12 |
| hm2DlrConfigRowStatus Describes the status of a row in the table.
Supports creation, deletion and activation of rows.
A row must not be active(1) in order to be modified.
A row can be taken out of serv… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.15 |
| hm2DlrRingName A logical name for the DLR ring to ease the
management of DLR rings. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.2 |
| hm2DlrRingport1IfIndex Interface index of the ringport 1 in the DLR ring.
A non-zero value indicates the ifIndex for the
corresponding entry in the ifTable. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.3 |
| hm2DlrRingport2IfIndex Interface index of the ringport 2 in the DLR ring.
A non-zero value indicates the ifIndex for the
corresponding entry in the ifTable. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.4 |
| hm2DlrRingport1OperStatus Operational status of ringport 1. | column | Hm2DlrPortStatusType | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.5 |
| hm2DlrRingport2OperStatus Operational status of ringport 2. | column | Hm2DlrPortStatusType | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.6 |
| hm2DlrSupervisorAdminState Enable or disable the supervisor function.
enable(1) indicates the device is configured
as a ring supervisor.
disable(2) indicates the device is configured
as a normal ring node. | column | HM2-TC-MIBHmEnabledStatus | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.7 |
| hm2DlrSupervisorPrecedence Precedence of the ring supervisor.
Numerically higher value indicates higher precedence. | column | Unsigned32 | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.8 |
| hm2DlrBeaconInterval Beacon interval time in microseconds. | column | Unsigned32 | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| hm2DlrRingIndex DLR ring index. | column | Unsigned32 | .1.3.6.1.4.1.248.11.40.1.5.1.1.10.1.1 |