frPVCEndptTable

FRNETSERV-MIB · .1.3.6.1.2.1.10.44.1.3
MIB view Table view

Object

table 
The Frame Relay PVC End-Point table.  This table
is used to model a PVC end-point.  This table
contains the traffic parameters and statistics for
a PVC end-point.
          
This table is used to identify the traffic
parameters for a bi-directional PVC segment end-
          
point, and it also provides statistics for a PVC
segment end-point.
          
A PVC segment end-point is identified by a UNI/NNI
logical port index value and DLCI index value.
          
If the frame relay service provider allows the
frame relay CNM subscriber to create, modify or
delete PVCs using SNMP, then this table is used to
identify and reserve the requested traffic
parameters of each PVC segment end-point.  The
Connection table is used to 'connect' the end-
points together.  Not all implementations will
support the capability of
creating/modifying/deleting PVCs using SNMP as a
feature of frame relay CNM service.
          
Uni-directional PVCs are modeled with zero valued
traffic parameters in one of the directions (In or
 Out direction) in this table.
          
To create a PVC, the following procedures shall be
followed:
          
1)  Create the entries for the PVC segment
    endpoints in the frPVCEndptTable by specifying
    the traffic parameters for the bi-directional
    PVC segment endpoints. As shown in figure 2, a
    point-to-point PVC has two endpoints, thus two
    entries in this table.  Uni-directional PVCs
    are modeled with zero valued traffic
    parameters in one direction; all the `In'
    direction parameters for one frame relay PVC
    End-point or all the `Out' direction
    parameters for the other frame relay PVC
    Endpoint.
          
    In    _____________________________  Out
   >>>>>>|                             |>>>>>>>>
   ______|    Frame Relay Network      |________
    Out  |                             |  In
   <<<<<<|_____________________________|<<<<<<<<
 Frame Relay                         Frame Relay
     PVC                                 PVC
   Endpoint                            Endpoint
          
            Figure 2, PVC Terminology
          
2)  Go to the Frame Relay Connection Group.

Context

MIB
FRNETSERV-MIB
OID
.1.3.6.1.2.1.10.44.1.3
Type
table
Status
current
Parent
frnetservObjects
Siblings
6
Children
1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
frLportTable
The Frame Relay Logical Port Information table is an interface-specific addendum to the generic ifTable of the Interface MIB.
table-.1.3.6.1.2.1.10.44.1.1
frMgtVCSigTable
The Frame Relay Management VC Signaling Parameters and Errors table.
table-.1.3.6.1.2.1.10.44.1.2
frPVCConnectIndexValue
This object returns a hint to be used for frPVCConnectIndex when creating entries in the frPVCConnectTable. The value 0 indicates that no unassigned entries are availab…
scalarInteger32.1.3.6.1.2.1.10.44.1.4
frPVCConnectTable
The Frame Relay PVC Connect Table is used to model the bi-directional PVC segment flows including: point-to-point PVCs, point-to- multipoint PVCs, and multipoint-to-multipoint PV…
table-.1.3.6.1.2.1.10.44.1.5
frAccountPVCTable
The Frame Relay Accounting PVC table. This table is used to perform accounting on a PVC segment end-point basis.
table-.1.3.6.1.2.1.10.44.1.6
frAccountLportTable
The Frame Relay Accounting Logical Port table. This table is used to perform accounting on a UNI/NNI Logical Port basis.
table-.1.3.6.1.2.1.10.44.1.7
Child Objects
ObjectTypeSyntaxOID
frPVCEndptEntry
An entry in the Frame Relay PVC Endpoint table.
row-.1.3.6.1.2.1.10.44.1.3.1