FRNETSERV-MIB

        The MIB module to describe generic objects for
Frame Relay Network Service.
    
Source file
FRNETSERV-MIB
Last revised
Identity
frnetservMIB
Base OID
1.3.6.1.2.1.10.44
Imported Objects
IF-MIB ifIndex InterfaceIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission
SNMPv2-TC RowStatus TimeStamp
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'FRNETSERV-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FRNETSERV-MIB::frnetservMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FRNETSERV-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FRNETSERV-MIB::frnetservMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (108)
.1.3.6.1.2.1.10.44
.1.3.6.1.2.1.10.44.1
.1.3.6.1.2.1.10.44.1.1
.1.3.6.1.2.1.10.44.1.1.1
Enumeration
.1.3.6.1.2.1.10.44.1.1.1.1
Enumeration
.1.3.6.1.2.1.10.44.1.1.1.10
Enumeration
.1.3.6.1.2.1.10.44.1.1.1.11
OctetsInteger32
.1.3.6.1.2.1.10.44.1.1.1.12
.1.3.6.1.2.1.10.44.1.1.1.2
.1.3.6.1.2.1.10.44.1.1.1.3
Enumeration
.1.3.6.1.2.1.10.44.1.1.1.4
OctetsEnumeration
.1.3.6.1.2.1.10.44.1.1.1.5
Enumeration
.1.3.6.1.2.1.10.44.1.1.1.6
frLportVCSigPointer deprecated
ObjectIdentifier
.1.3.6.1.2.1.10.44.1.1.1.7
Integer32
.1.3.6.1.2.1.10.44.1.1.1.8
Enumeration
.1.3.6.1.2.1.10.44.1.1.1.9
.1.3.6.1.2.1.10.44.1.2
.1.3.6.1.2.1.10.44.1.2.1
Enumeration
.1.3.6.1.2.1.10.44.1.2.1.1
SecondsInteger32
.1.3.6.1.2.1.10.44.1.2.1.10
.1.3.6.1.2.1.10.44.1.2.1.11
.1.3.6.1.2.1.10.44.1.2.1.12
.1.3.6.1.2.1.10.44.1.2.1.13
.1.3.6.1.2.1.10.44.1.2.1.14
.1.3.6.1.2.1.10.44.1.2.1.15
.1.3.6.1.2.1.10.44.1.2.1.16
Enumeration
.1.3.6.1.2.1.10.44.1.2.1.17
PollsInteger32
.1.3.6.1.2.1.10.44.1.2.1.18
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.19
PollsInteger32
.1.3.6.1.2.1.10.44.1.2.1.2
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.20
SecondsInteger32
.1.3.6.1.2.1.10.44.1.2.1.21
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.22
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.23
SecondsInteger32
.1.3.6.1.2.1.10.44.1.2.1.24
SecondsInteger32
.1.3.6.1.2.1.10.44.1.2.1.25
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.3
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.4
SecondsInteger32
.1.3.6.1.2.1.10.44.1.2.1.5
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.6
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.7
SecondsInteger32
.1.3.6.1.2.1.10.44.1.2.1.8
EventsInteger32
.1.3.6.1.2.1.10.44.1.2.1.9
.1.3.6.1.2.1.10.44.1.3
.1.3.6.1.2.1.10.44.1.3.1
Integer32
.1.3.6.1.2.1.10.44.1.3.1.1
Integer32
.1.3.6.1.2.1.10.44.1.3.1.10
.1.3.6.1.2.1.10.44.1.3.1.11
Enumeration
.1.3.6.1.2.1.10.44.1.3.1.12
.1.3.6.1.2.1.10.44.1.3.1.13
.1.3.6.1.2.1.10.44.1.3.1.14
.1.3.6.1.2.1.10.44.1.3.1.15
.1.3.6.1.2.1.10.44.1.3.1.16
.1.3.6.1.2.1.10.44.1.3.1.17
.1.3.6.1.2.1.10.44.1.3.1.18
.1.3.6.1.2.1.10.44.1.3.1.19
OctetsInteger32
.1.3.6.1.2.1.10.44.1.3.1.2
.1.3.6.1.2.1.10.44.1.3.1.20
.1.3.6.1.2.1.10.44.1.3.1.21
.1.3.6.1.2.1.10.44.1.3.1.22
.1.3.6.1.2.1.10.44.1.3.1.23
.1.3.6.1.2.1.10.44.1.3.1.24
.1.3.6.1.2.1.10.44.1.3.1.25
.1.3.6.1.2.1.10.44.1.3.1.26
.1.3.6.1.2.1.10.44.1.3.1.27
.1.3.6.1.2.1.10.44.1.3.1.28
.1.3.6.1.2.1.10.44.1.3.1.29
BitsInteger32
.1.3.6.1.2.1.10.44.1.3.1.3
.1.3.6.1.2.1.10.44.1.3.1.30
Integer32
.1.3.6.1.2.1.10.44.1.3.1.31
BitsInteger32
.1.3.6.1.2.1.10.44.1.3.1.4
Bits per SecondInteger32
.1.3.6.1.2.1.10.44.1.3.1.5
OctetsInteger32
.1.3.6.1.2.1.10.44.1.3.1.6
BitsInteger32
.1.3.6.1.2.1.10.44.1.3.1.7
BitsInteger32
.1.3.6.1.2.1.10.44.1.3.1.8
Bits per SecondInteger32
.1.3.6.1.2.1.10.44.1.3.1.9
Integer32
.1.3.6.1.2.1.10.44.1.4
.1.3.6.1.2.1.10.44.1.5
.1.3.6.1.2.1.10.44.1.5.1
Integer32
.1.3.6.1.2.1.10.44.1.5.1.1
.1.3.6.1.2.1.10.44.1.5.1.10
.1.3.6.1.2.1.10.44.1.5.1.11
.1.3.6.1.2.1.10.44.1.5.1.12
.1.3.6.1.2.1.10.44.1.5.1.13
.1.3.6.1.2.1.10.44.1.5.1.2
Integer32
.1.3.6.1.2.1.10.44.1.5.1.3
.1.3.6.1.2.1.10.44.1.5.1.4
Integer32
.1.3.6.1.2.1.10.44.1.5.1.5
Enumeration
.1.3.6.1.2.1.10.44.1.5.1.6
Enumeration
.1.3.6.1.2.1.10.44.1.5.1.7
Enumeration
.1.3.6.1.2.1.10.44.1.5.1.8
.1.3.6.1.2.1.10.44.1.5.1.9
.1.3.6.1.2.1.10.44.1.6
.1.3.6.1.2.1.10.44.1.6.1
Integer32
.1.3.6.1.2.1.10.44.1.6.1.1
.1.3.6.1.2.1.10.44.1.6.1.2
.1.3.6.1.2.1.10.44.1.6.1.3
.1.3.6.1.2.1.10.44.1.6.1.4
.1.3.6.1.2.1.10.44.1.7
.1.3.6.1.2.1.10.44.1.7.1
.1.3.6.1.2.1.10.44.1.7.1.1
.1.3.6.1.2.1.10.44.1.7.1.2
.1.3.6.1.2.1.10.44.1.7.1.3
.1.3.6.1.2.1.10.44.2
.1.3.6.1.2.1.10.44.2.0
.1.3.6.1.2.1.10.44.3
.1.3.6.1.2.1.10.44.3.1
.1.3.6.1.2.1.10.44.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. SNMP-FRAMEWORK-MIBrfc
  8. FRNETSERV-MIBrfcselected
Conformance Groups (13)
A collection of objects providing information
applicable to a Frame Relay Logical Port. This
group has been deprecated to eliminate reference

to the object frLportVCSigPointer.

Use the new group frnetservLportGroup2 as a
replacement for this group.
.1.3.6.1.2.1.10.44.3.1.1
A collection of objects providing information
applicable to the Local In-Channel Signaling
Procedures used for a UNI/NNI logical port.
.1.3.6.1.2.1.10.44.3.1.2
A collection of objects providing information
applicable to a Frame Relay PVC end-point.
.1.3.6.1.2.1.10.44.3.1.3
A collection of objects providing information
applicable to a Frame Relay PVC connection.
.1.3.6.1.2.1.10.44.3.1.4
A collection of objects providing accounting
information application to a Frame Relay PVC end-
point.
.1.3.6.1.2.1.10.44.3.1.5
A collection of objects providing accounting
information application to a Frame Relay logical
port.
.1.3.6.1.2.1.10.44.3.1.6
A collection of objects providing information
applicable to a Frame Relay Logical Port.

This new version of the Logical Port Group
eliminates the frLportVCSigPointer and adds
support for fragmentation.
.1.3.6.1.2.1.10.44.3.1.7
Additions to the PVC end-point group. These
additions provide new frame counters to track
frame loss. In addition, the new FR/ATM IWF MIB
cross-connect index is included.
.1.3.6.1.2.1.10.44.3.1.8
Additions to the PVC Connect Group.
.1.3.6.1.2.1.10.44.3.1.9
Administrative (R/W) objects for creating a
switch logical port.
.1.3.6.1.2.1.10.44.3.1.10
A collection of objects providing information
applicable to the Local In-Channel Signaling
Procedures used for a UNI/NNI logical port.
.1.3.6.1.2.1.10.44.3.1.11
Deprecated notification group. The
frPVCConnectStatusChange notification was flawed
because it included redundant indexes and was not
properly encoded for SMIv1 conversion.
.1.3.6.1.2.1.10.44.3.1.12
A collection of notifications that apply to frame
relay PVC Connections
.1.3.6.1.2.1.10.44.3.1.13
Compliance Statements (3)

OID .1.3.6.1.2.1.10.44.3.2.1
The compliance statement for SNMP entities which
have Frame Relay Network Service Interfaces.

This compliance statement has been deprecated in
favor of frnetservCompliance2. The new compliance
module expands the mandatory groups to include
notification and other new objects.
Required groups
mandatory frnetservLportGroup
mandatory frnetservMgtVCSigGroup
mandatory frnetservPVCEndptGroup
mandatory frnetservPVCConnectGroup
optional frnetservAccountPVCGroup This group is optional for Frame Relay
interfaces. It is mandatory if and only if
accounting is performed on a PVC basis this Frame
Relay interface.
optional frnetservAccountLportGroup This group is optional for Frame Relay
interfaces. It is mandatory if and only if
accounting is performed on a logical port basis
this Frame Relay interface.
Object refinements
ObjectAccessSyntaxDescription
frPVCEndptInMaxFrameSize readonly
Write access is not required.
frPVCEndptInBc readonly
Write access is not required.
frPVCEndptInBe readonly
Write access is not required.
frPVCEndptInCIR readonly
Write access is not required.
frPVCEndptOutMaxFrameSize readonly
Write access is not required.
frPVCEndptOutBc readonly
Write access is not required.
frPVCEndptOutBe readonly
Write access is not required.
frPVCEndptOutCIR readonly
Write access is not required.
frPVCEndptRowStatus readonly
active(1)
Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1).
frPVCConnectAdminStatus readonly
Write access is not required.
frPVCConnectRowStatus readonly
active(1)
Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1).

OID .1.3.6.1.2.1.10.44.3.2.2
The compliance statement for SNMP entities which
have Frame Relay Network Service Interfaces.

The distinction between 'service' and 'switch' is
that a 'switch' is configured via this MIB.
Hence, the various read/write objects have write
capability. A 'service' represents a passive
monitor-only customer network management
interface. The various read/write objects are
restricted to read-only capability.
Required groups
mandatory frnetservLportGroup2
mandatory frnetservMgtVCSigGroup
mandatory frnetservPVCEndptGroup
mandatory frnetservPVCEndptGroup2
mandatory frnetservPVCConnectGroup
mandatory frnetservPVCConnectNamesGroup
mandatory frnetservPVCNotifGroup2
optional frnetservAccountPVCGroup This group is optional for frame relay
interfaces. It is mandatory if and only if
accounting is performed on a PVC basis this frame
relay interface.
optional frnetservAccountLportGroup This group is optional for frame relay
interfaces. It is mandatory if and only if
accounting is performed on a logical port basis
this frame relay interface.
Object refinements
ObjectAccessSyntaxDescription
frPVCEndptInMaxFrameSize readonly
Write access is not required.
frPVCEndptInBc readonly
Write access is not required.
frPVCEndptInBe readonly
Write access is not required.
frPVCEndptInCIR readonly
Write access is not required.
frPVCEndptOutMaxFrameSize readonly
Write access is not required.
frPVCEndptOutBc readonly
Write access is not required.
frPVCEndptOutBe readonly
Write access is not required.
frPVCEndptOutCIR readonly
Write access is not required.
frPVCEndptRowStatus readonly
active(1)
Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1).
frPVCConnectAdminStatus readonly
Write access is not required.
frPVCConnectRowStatus readonly
active(1)
Write access is not required, and only one of the
six enumerated values for the RowStatus textual
convention need be supported, specifically:
active(1).
frLportFragControl readonly
Write access is not required.
frLportFragSize readonly
Write access is not required.
frPVCConnectUserName readonly
Write access is not required.
frPVCConnectProviderName readonly
Write access is not required.

OID .1.3.6.1.2.1.10.44.3.2.3
The compliance statement for SNMP entities which
have Frame Relay Network Switch objects.

The distinction between 'service' and 'switch' is
that a 'switch' is configured via this MIB.

Hence, the various read/write objects have write
capability. A 'service' represents a passive
monitor-only customer network management
interface. The various read/write objects are
restricted to read-only capability.
Required groups
mandatory frnetservLportGroup2
mandatory frnetservLportAdminGroup
mandatory frnetservMgtVCSigGroup
mandatory frnetservMgtVCSigAdminGroup
mandatory frnetservPVCEndptGroup
mandatory frnetservPVCEndptGroup2
mandatory frnetservPVCConnectGroup
mandatory frnetservPVCConnectNamesGroup
mandatory frnetservPVCNotifGroup2
optional frnetservAccountPVCGroup This group is optional for frame relay
interfaces. It is mandatory if and only if
accounting is performed on a PVC basis this frame
relay interface.
optional frnetservAccountLportGroup This group is optional for frame relay
interfaces. It is mandatory if and only if
accounting is performed on a logical port basis
this frame relay interface.
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.2.1.10.44.2.0.2
This notification indicates that the indicated
PVC has changed state.

This notification is not sent if an FR-UNI changes
state; a linkDown or linkUp notification should be
sent instead. The first instance of
frPVCEndptRcvdSigStatus is for the endpoint with
LowIfIndex, LowDLCIIndex. The second instance of
frPVCEndptRcvdSigStatus is for the endpoint with
HighIfIndex, HighDLCIIndex
.1.3.6.1.2.1.10.44.2.1
Refer to the description of the
frPVCConnectStatusNotif notification that has
replaced this notification. The notification is
deprecated due to the incorrect inclusion of index
values and to take advantage of the trap prefix
for automatic conversion from SMIv2 to SMIv1 by
making the one but last sub-ID a zero (i.e. the
so-called trap prefix).