frCircuitReceivedDEs
FRAME-RELAY-DTE-MIB ·
.1.3.6.1.2.1.10.32.2.1.18
Object
column
SNMPv2-SMICounter32
Number of frames received from the network indicating that they were eligible for discard since the virtual circuit was created. This occurs when the remote DTE sets the DE flag, or when in remote DTE's switch detects that the frame was received as Excess Burst data.
Context
- MIB
- FRAME-RELAY-DTE-MIB
- OID
.1.3.6.1.2.1.10.32.2.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- frCircuitEntry
- Table
- frCircuitTable
- Siblings
- 20
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frCircuitIfIndex The ifIndex Value of the ifEntry this virtual circuit
is layered onto. | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.10.32.2.1.1 |
| frCircuitCreationTime The value of sysUpTime when the virtual circuit was
created, whether by the Data Link Connection Management
Interface or by a SetRequest. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.10.32.2.1.10 |
| frCircuitLastTimeChange The value of sysUpTime when last there was a change in
the virtual circuit state | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.10.32.2.1.11 |
| frCircuitCommittedBurst This variable indicates the maximum amount of data, in
bits, that the network agrees to transfer under normal
conditions, during the measurement interval. | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.12 |
| frCircuitExcessBurst This variable indicates the maximum amount of
uncommitted data bits that the network will attempt to
deliver over the measurement interval.
By default, if not confi… | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.13 |
| frCircuitThroughput Throughput is the average number of 'Frame Relay
Information Field' bits transferred per second across a
user network interface in one direction, measured over
the measurement int… | column | Integer32 | .1.3.6.1.2.1.10.32.2.1.14 |
| frCircuitMulticast This indicates whether this VC is used as a unicast VC
(i.e. not multicast) or the type of multicast service
subscribed to | column | Enumeration | .1.3.6.1.2.1.10.32.2.1.15 |
| frCircuitType Indication of whether the VC was manually created
(static), or dynamically created (dynamic) via the data
link control management interface. | column | Enumeration | .1.3.6.1.2.1.10.32.2.1.16 |
| frCircuitDiscards The number of inbound frames dropped because of format
errors, or because the VC is inactive. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.17 |
| frCircuitSentDEs Number of frames sent to the network indicating that
they were eligible for discard since the virtual
circuit was created. This occurs when the local DTE
sets the DE flag, indic… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.19 |
| frCircuitDlci The Data Link Connection Identifier for this virtual
circuit. | column | DLCI | .1.3.6.1.2.1.10.32.2.1.2 |
| frCircuitLogicalIfIndex Normally the same value as frDlcmiIfIndex, but
different when an implementation associates a virtual
ifEntry with a DLC or set of DLCs in order to associate
higher layer objects s… | column | IF-MIBInterfaceIndex | .1.3.6.1.2.1.10.32.2.1.20 |
| frCircuitRowStatus This object is used to create a new row or modify or
destroy an existing row in the manner described in the
definition of the RowStatus textual convention.
Writable objects in the… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.32.2.1.21 |
| frCircuitState Indicates whether the particular virtual circuit is
operational. In the absence of a Data Link Connection
Management Interface, virtual circuit entries (rows)
may be created by s… | column | Enumeration | .1.3.6.1.2.1.10.32.2.1.3 |
| frCircuitReceivedFECNs Number of frames received from the network indicating
forward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the FECN
flag, or when a swit… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.4 |
| frCircuitReceivedBECNs Number of frames received from the network indicating
backward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the BECN
flag, or when a swi… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.5 |
| frCircuitSentFrames The number of frames sent from this virtual circuit
since it was created. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.6 |
| frCircuitSentOctets The number of octets sent from this virtual circuit
since it was created. Octets counted are the full
frame relay header and the payload, but do not include
the flag characters o… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.7 |
| frCircuitReceivedFrames Number of frames received over this virtual circuit
since it was created. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.8 |
| frCircuitReceivedOctets Number of octets received over this virtual circuit
since it was created. Octets counted include the full
frame relay header, but do not include the flag
characters or the CRC. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.10.32.2.1.9 |