eoImportance
ENERGY-OBJECT-CONTEXT-MIB ·
.1.3.6.1.2.1.231.1.1.1.11
Object
column
r/w
Integer32
This object specifies a ranking of how important the
Energy Object is (on a scale of 1 to 100) compared with
other Energy Objects in the same Energy Management
Domain. The ranking should provide a business or
operational context for the Energy Object as compared to
other similar Energy Objects. This ranking could be used
as input for policy-based network management.
Although network managers must establish their own
ranking, the following is a broad recommendation:
90 to 100 Emergency response
80 to 89 Executive or business critical
70 to 79 General or average
60 to 69 Staff or support
40 to 59 Public or guest
1 to 39 Decorative or hospitality
The value of eoImportance must remain constant at least
from one re-initialization of the Energy Object local
management system to the next re-initialization.
Context
- MIB
- ENERGY-OBJECT-CONTEXT-MIB
- OID
.1.3.6.1.2.1.231.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eoEntry
- Table
- eoTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eoEthPortIndex This variable uniquely identifies the power Ethernet
port to which a Power over Ethernet device is connected.
If the Power over Ethernet MIB in RFC 3621 is supported by
the SNMP a… | column | PethPsePortIndexOrZero | .1.3.6.1.2.1.231.1.1.1.1 |
| eoKeywords This object specifies a list of keywords that can be
used to group Energy Objects for reporting or searching.
The value is the zero-length string if no keywords have
been configur… | column | EnergyObjectKeywordList | .1.3.6.1.2.1.231.1.1.1.10 |
| eoPowerCategory This object describes the Energy Object category, which
indicates the expected behavior or physical property of
the Energy Object, based on its design. An Energy Object
can be a … | column | Enumeration | .1.3.6.1.2.1.231.1.1.1.12 |
| eoAlternateKey The eoAlternateKey object specifies an alternate key
string that can be used to identify the Energy Object.
Since Energy Management Systems (EnMS) and Network
Management Systems (… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.231.1.1.1.13 |
| eoPowerInterfaceType This object describes the Power Interface for an Energy
Object. A Power Interface is an interface at which an
Energy Object is connected to a power transmission
medium, at which … | column | Enumeration | .1.3.6.1.2.1.231.1.1.1.14 |
| eoEthPortGrpIndex This variable uniquely identifies the group containing
the port to which a power over Ethernet device PSE is
connected (RFC 3621). If the Power over Ethernet MIB (RFC
3621) is su… | column | PethPsePortGroupIndexOrZero | .1.3.6.1.2.1.231.1.1.1.2 |
| eoLldpPortNumber This variable uniquely identifies the port component
(contained in the local chassis with the LLDP agent) as
defined by the lldpLocPortNum in the LLDP-MIB and
LLDP-MED-MIB. If th… | column | LldpPortNumberOrZero | .1.3.6.1.2.1.231.1.1.1.3 |
| eoMgmtMacAddress This object specifies a Media Access Control (MAC) address
of the Energy Object. | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.231.1.1.1.4 |
| eoMgmtAddressType This object specifies the eoMgmtAddress type, i.e., an
IPv4 or IPv6 address. This object MUST be
populated when eoMgmtAddress is populated. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.231.1.1.1.5 |
| eoMgmtAddress This object specifies the management address as an IPv4
address or IPv6 address of Energy Object. The IP address
type, i.e. IPv4 or IPv6, is determined by the
eoMgmtAddressType v… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.231.1.1.1.6 |
| eoMgmtDNSName This object specifies a DNS name of the eoMgmtAddress.
This object can be used as an alternate key to help link
the Energy Object with other keyed information that may
be stored w… | column | OctetString | .1.3.6.1.2.1.231.1.1.1.7 |
| eoDomainName This object specifies the name of an Energy Management
Domain for the Energy Object. By default, this object
should be an empty string. The value of eoDomainName must
remain con… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.231.1.1.1.8 |
| eoRoleDescription This object specifies an administratively assigned name
to indicate the purpose an Energy Object serves in the
network.
For example, we can have a phone deployed to… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.231.1.1.1.9 |