ENERGY-OBJECT-CONTEXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
19

eoTable

table
.1.3.6.1.2.1.231.1.1 · 1 row entry · 14 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk eoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENERGY-OBJECT-CONTEXT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENERGY-OBJECT-CONTEXT-MIB::eoTable' 
This table lists Energy Objects.
eoEntry row .1.3.6.1.2.1.231.1.1.1
An entry describes the attributes of an Energy Object.
Whenever a new Energy Object is added or an existing
Energy Object is deleted, a row in the eoTable is added
or deleted.
Indexes
Column Syntax OID
eoEthPortIndex
This variable uniquely identifies the power Ethernet
port to which a Power over Ethernet device is connected.
If the Power over Ethernet MIB in RFC 3621 is supported by
the SNMP agent managing the Energy Object, then th…
PethPsePortIndexOrZero
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.231.1.1.1.1
eoEthPortGrpIndex
This variable uniquely identifies the group containing
the port to which a power over Ethernet device PSE is
connected (RFC 3621). If the Power over Ethernet MIB (RFC
3621) is supported by the SNMP agent managing the E…
PethPsePortGroupIndexOrZero
Type Constraints:
range: 0..2147483647
 .1.3.6.1.2.1.231.1.1.1.2
eoLldpPortNumber
This variable uniquely identifies the port component
(contained in the local chassis with the LLDP agent) as
defined by the lldpLocPortNum in the LLDP-MIB and
LLDP-MED-MIB. If the LLDP-MIB is supported by the
SNMP agen…
LldpPortNumberOrZero
Type Constraints:
range: 0..4096
 .1.3.6.1.2.1.231.1.1.1.3
eoMgmtMacAddress
This object specifies a Media Access Control (MAC) address
of the Energy Object.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.2.1.231.1.1.1.4
eoMgmtAddressType
This object specifies the eoMgmtAddress type, i.e., an
IPv4 or IPv6 address. This object MUST be
populated when eoMgmtAddress is populated.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.2.1.231.1.1.1.5
eoMgmtAddress
This object specifies the management address as an IPv4
address or IPv6 address of Energy Object. The IP address
type, i.e. IPv4 or IPv6, is determined by the
eoMgmtAddressType value. This object can be used as an
alt…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.231.1.1.1.6
eoMgmtDNSName
This object specifies a DNS name of the eoMgmtAddress.
This object can be used as an alternate key to help link
the Energy Object with other keyed information that may
be stored within the EnMS(s). A DNS Name must alwa…
OctetString .1.3.6.1.2.1.231.1.1.1.7
eoDomainName
This object specifies the name of an Energy Management
Domain for the Energy Object. By default, this object
should be an empty string. The value of eoDomainName must
remain constant at least from one re-initializatio…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.231.1.1.1.8
eoRoleDescription
This object specifies an administratively assigned name
to indicate the purpose an Energy Object serves in the
network.

For example, we can have a phone deployed to a lobby with
eoRoleDescription as 'Lobb…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.231.1.1.1.9
eoKeywords
This object specifies a list of keywords that can be
used to group Energy Objects for reporting or searching.
The value is the zero-length string if no keywords have
been configured. If multiple keywords are present, t…
EnergyObjectKeywordListr/w
Type Constraints:
range: 0..2048
 .1.3.6.1.2.1.231.1.1.1.10
eoImportance
This object specifies a ranking of how important the
Energy Object is (on a scale of 1 to 100) compared with
other Energy Objects in the same Energy Management
Domain. The ranking should provide a business or
operation…
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.2.1.231.1.1.1.11
eoPowerCategory
This object describes the Energy Object category, which
indicates the expected behavior or physical property of
the Energy Object, based on its design. An Energy Object
can be a consumer(0), producer(1), meter(2),
dist…
Enumeration
Enumerated Values:
0consumer
1producer
2meter
3distributor
4store
 .1.3.6.1.2.1.231.1.1.1.12
eoAlternateKey
The eoAlternateKey object specifies an alternate key
string that can be used to identify the Energy Object.
Since Energy Management Systems (EnMS) and Network
Management Systems (NMSs) may need to correlate objects
acro…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
 .1.3.6.1.2.1.231.1.1.1.13
eoPowerInterfaceType
This object describes the Power Interface for an Energy
Object. A Power Interface is an interface at which an
Energy Object is connected to a power transmission
medium, at which it can in turn receive power, provide
po…
Enumeration
Enumerated Values:
0inlet
1outlet
2both
 .1.3.6.1.2.1.231.1.1.1.14

eoRelationTable

table
.1.3.6.1.2.1.231.1.2 · 1 row entry · 5 columns
Open in standard view
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk eoRelationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ENERGY-OBJECT-CONTEXT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ENERGY-OBJECT-CONTEXT-MIB::eoRelationTable' 
This table describes the relationships between Energy
Objects.
eoRelationEntry row .1.3.6.1.2.1.231.1.2.1
An entry in this table specifies the Energy relationship
between Energy objects. Energy relations between two
Energy objects are defined in RFC 7326.
Indexes
Column Syntax OID
eoRelationIndex
This object is an arbitrary index to identify the Energy
Object related to another Energy Object.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.2.1.231.1.2.1.1
eoRelationID
This object specifies the Universally Unique Identifier
(UUID) of the peer (other) Energy Object. The UUID must
comply with the specifications of UUID in UUID-TC-MIB.

If the UUID of the Energy Object is …
UUID-TC-MIBUUIDorZeror/w
Type Constraints:
range: 0
range: 16
 .1.3.6.1.2.1.231.1.2.1.2
eoRelationship
This object describes the relations between Energy
Objects. For each Energy Object, the relations between
the other Energy Objects are specified using the bitmap.
IANA-ENERGY-RELATION-MIBIANAEnergyRelationshipr/w
Type Values:
1poweredBy
2powering
3meteredBy
4metering
5aggregatedBy
6aggregating
 .1.3.6.1.2.1.231.1.2.1.3
eoRelationStatus
The status controls and reflects the creation and
activation status of a row in this table to specify energy
relationship between Energy Objects.

An entry status may not be active(1) unless all objects in…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.2.1.231.1.2.1.4
eoRelationStorageType
This variable indicates the storage type for this row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.2.1.231.1.2.1.5