docsLoadbal3ChgOverGroupInitTech
DOCS-LOADBAL3-MIB ·
.1.3.6.1.4.1.4491.2.1.22.1.2.2
Object
scalar
r/w
ChChgInitTechMap
This attribute represents the initialization technique that the cable modem is instructed to use when performing multiple-channel change-over operation. The value of this attribute applies to all upstream channels in the channel set.
Context
- MIB
- DOCS-LOADBAL3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.22.1.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- docsLoadbal3ChgOverGroup
- Siblings
- 11
Syntax
ChChgInitTechMap
- Source
- ChChgInitTechMap
- Base type
Bits
Values & Constraints
Type Values
0 | reinitializeMac |
1 | broadcastInitRanging |
2 | unicastInitRanging |
3 | initRanging |
4 | direct |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsLoadbal3ChgOverGroupMacAddress This attribute represents the MAC address of the cable
modem that the CMTS instructs to move to a new downstream
and/or upstream channel set. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.22.1.2.1 |
| docsLoadbal3ChgOverGroupTransactionId This attribute represents an operator identifier
for the change-over operation to be used to correlate
logged information in the ChangeOver3 Status object.
The CMTS uses this valu… | scalar | Unsigned32 | .1.3.6.1.4.1.4491.2.1.22.1.2.10 |
| docsLoadbal3ChgOverGroupCommit This attribute when set to 'true' triggers the change-over
operation for Externally-Directed Load Balancing.
Setting this attribute to 'true' is known as a commit
opera… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.22.1.2.11 |
| docsLoadbal3ChgOverGroupLastCommit The value of sysUpTime when the attribute Commit was
last set to true. Zero if never set. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4491.2.1.22.1.2.12 |
| docsLoadbal3ChgOverGroupForceUCC This attribute when set to 'true' indicates that the CMTS
forces UCC messages instead of DCC messages. In some cases
the CMTS may still use UCC commands even though this
attribu… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.22.1.2.3 |
| docsLoadbal3ChgOverGroupdownFrequency This attribute represents a single-downstream frequency
to which the cable modem is instructed to move
using a DCC request. The value zero indicates that
this attribute is ignored… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.22.1.2.4 |
| docsLoadbal3ChgOverGroupMdIfIndex This attribute describes the MAC Domain Interface
index of the triplet: Mac Domain, RCP-ID and RCC Status
Index of the RccStatus object that represents the
RCC used in the change-… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4491.2.1.22.1.2.5 |
| docsLoadbal3ChgOverGroupRcpId This attribute describes the RCP-ID of the triplet:
Mac Domain, RCP-ID and RCC Status Index of the RccStatus
object that represents the RCC used in the change-over
operation. | scalar | DOCS-IF3-MIBRcpId | .1.3.6.1.4.1.4491.2.1.22.1.2.6 |
| docsLoadbal3ChgOverGroupRccId This attribute describes the RCC Status Index of the
triplet: Mac Domain, RCP-ID and RCC Status Index of
the RccStatus object that represents the RCC used in
the change-over oper… | scalar | Unsigned32 | .1.3.6.1.4.1.4491.2.1.22.1.2.7 |
| docsLoadbal3ChgOverGroupUsChSet This attribute describes the Channel list (within
the context of the MAC domain identified by MdIfIndex)
that represents the final TCS expected from the change-over
operation.
Whe… | scalar | DOCS-IF3-MIBChannelList | .1.3.6.1.4.1.4491.2.1.22.1.2.8 |
| docsLoadbal3ChgOverGroupServiceFlowInfo This attribute provides a list of Service Flow ID-Channel
Set ID pairs used to control Service Flow assignment
in the change-over operation. This is intended
as an override to the… | scalar | OctetString | .1.3.6.1.4.1.4491.2.1.22.1.2.9 |