docsLoadbal3ChgOverGroup
DOCS-LOADBAL3-MIB ·
.1.3.6.1.4.1.4491.2.1.22.1.2
Object
node
No description available.
Context
- MIB
- DOCS-LOADBAL3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.22.1.2- Type
- node
- Parent
- docsLoadbal3MibObjects
- Siblings
- 10
- Children
- 12
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsLoadbal3System | node | - | .1.3.6.1.4.1.4491.2.1.22.1.1 |
| docsLoadbal3PolicyTable This object describes the set of load balancing policies.
Instances from this object might be referenced
by GrpStatus object . All the rules contained in a
load balancing policy a… | table | - | .1.3.6.1.4.1.4491.2.1.22.1.10 |
| docsLoadbal3BasicRuleTable This object represents a basic ruleset applicable
to a load balancing policy that references it. | table | - | .1.3.6.1.4.1.4491.2.1.22.1.11 |
| docsLoadbal3ChgOverStatusTable This object reports the status of cable modems instructed
to move to a new downstream and/or upstream channel
or channel sets when commanded either by an operation
in the ChgOver … | table | - | .1.3.6.1.4.1.4491.2.1.22.1.3 |
| docsLoadbal3CmtsCmParamsTable This object represents the autonomous load balancing
parameters provisioned for cable modem. The CMTS
selects the cable modem Load Balancing Group (GrpId
attribute of this object)… | table | - | .1.3.6.1.4.1.4491.2.1.22.1.4 |
| docsLoadbal3GeneralGrpDefaults | node | - | .1.3.6.1.4.1.4491.2.1.22.1.5 |
| docsLoadbal3GeneralGrpCfgTable This object provides the parameters for the General
Load Balancing Groups of MD-CM-SGs associated with
MAC Domain-Fiber Node pairs. This object allows configuration
of load balanc… | table | - | .1.3.6.1.4.1.4491.2.1.22.1.6 |
| docsLoadbal3ResGrpCfgTable This object represents the configuration of Restricted
Load Balancing Groups. | table | - | .1.3.6.1.4.1.4491.2.1.22.1.7 |
| docsLoadbal3GrpStatusTable This object represents the status of all General
and Restricted Load Balancing Groups in this CMTS.
This object summarizes the load balancing parameters
that applies to CMTS syste… | table | - | .1.3.6.1.4.1.4491.2.1.22.1.8 |
| docsLoadbal3RestrictCmCfgTable This object describes the list of cable modems being
statically provisioned at the CMTS to a Restricted
Load Balancing Group.
When a CM registers it is either assigned to | table | - | .1.3.6.1.4.1.4491.2.1.22.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsLoadbal3ChgOverGroupMacAddress This attribute represents the MAC address of the cable
modem that the CMTS instructs to move to a new downstream
and/or upstream channel set. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.22.1.2.1 |
| docsLoadbal3ChgOverGroupTransactionId This attribute represents an operator identifier
for the change-over operation to be used to correlate
logged information in the ChangeOver3 Status object.
The CMTS uses this valu… | scalar | Unsigned32 | .1.3.6.1.4.1.4491.2.1.22.1.2.10 |
| docsLoadbal3ChgOverGroupCommit This attribute when set to 'true' triggers the change-over
operation for Externally-Directed Load Balancing.
Setting this attribute to 'true' is known as a commit
opera… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.22.1.2.11 |
| docsLoadbal3ChgOverGroupLastCommit The value of sysUpTime when the attribute Commit was
last set to true. Zero if never set. | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.4491.2.1.22.1.2.12 |
| docsLoadbal3ChgOverGroupInitTech This attribute represents the initialization technique
that the cable modem is instructed to use when
performing multiple-channel change-over operation.
The value of this attribut… | scalar | ChChgInitTechMap | .1.3.6.1.4.1.4491.2.1.22.1.2.2 |
| docsLoadbal3ChgOverGroupForceUCC This attribute when set to 'true' indicates that the CMTS
forces UCC messages instead of DCC messages. In some cases
the CMTS may still use UCC commands even though this
attribu… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.22.1.2.3 |
| docsLoadbal3ChgOverGroupdownFrequency This attribute represents a single-downstream frequency
to which the cable modem is instructed to move
using a DCC request. The value zero indicates that
this attribute is ignored… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.22.1.2.4 |
| docsLoadbal3ChgOverGroupMdIfIndex This attribute describes the MAC Domain Interface
index of the triplet: Mac Domain, RCP-ID and RCC Status
Index of the RccStatus object that represents the
RCC used in the change-… | scalar | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4491.2.1.22.1.2.5 |
| docsLoadbal3ChgOverGroupRcpId This attribute describes the RCP-ID of the triplet:
Mac Domain, RCP-ID and RCC Status Index of the RccStatus
object that represents the RCC used in the change-over
operation. | scalar | DOCS-IF3-MIBRcpId | .1.3.6.1.4.1.4491.2.1.22.1.2.6 |
| docsLoadbal3ChgOverGroupRccId This attribute describes the RCC Status Index of the
triplet: Mac Domain, RCP-ID and RCC Status Index of
the RccStatus object that represents the RCC used in
the change-over oper… | scalar | Unsigned32 | .1.3.6.1.4.1.4491.2.1.22.1.2.7 |
| docsLoadbal3ChgOverGroupUsChSet This attribute describes the Channel list (within
the context of the MAC domain identified by MdIfIndex)
that represents the final TCS expected from the change-over
operation.
Whe… | scalar | DOCS-IF3-MIBChannelList | .1.3.6.1.4.1.4491.2.1.22.1.2.8 |
| docsLoadbal3ChgOverGroupServiceFlowInfo This attribute provides a list of Service Flow ID-Channel
Set ID pairs used to control Service Flow assignment
in the change-over operation. This is intended
as an override to the… | scalar | OctetString | .1.3.6.1.4.1.4491.2.1.22.1.2.9 |