portFrameChkSumType
CISCO-WAN-FR-PORT-MIB ·
.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25
Object
column
r/w
Enumeration
The value of this object identifies the CRC Length
in the HDLC Packet. Applicable for FrameForwarding
ports only.
This object can not be modified if there are any
frame relay connections that are configured on the port.
This object is not applicable to MGX Release 1.x.
Context
- MIB
- CISCO-WAN-FR-PORT-MIB
- OID
.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- frPortCnfPortGrpEntry
- Table
- frPortCnfPortGrpTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | crc16 |
2 | crc32 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portNum This is the frame relay(logical) port number.
For Service Modules, supporting ifTable, this
must be the ifIndex value of the frame relay port.
The p… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.1 |
| portType The value of this object identifies the network
interface for this frame relay port.
The Possible values are:
frame-relay(1) : Frame Relay Servic… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10 |
| portSvcStatus The value of this object is used for enabling/disabling
the SVC operation on a frame relay port.
For FRSM12 card: Not Supported | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.11 |
| portSvcInUse The value of this object is used for representing
whether SVC is in use or not.
For FRSM12 card: Not Supported | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.12 |
| portSvcShareLcn The value of this object identifies the
SVC shared LCN type.
For FRSM12 card: Not Supported | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.13 |
| portSvcLcnLow The value of this object identifies the
low end of the reserved LCN for SVC.
For FRSM12 card: Not Supported | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.14 |
| portSvcLcnHigh The value of this object identifies the
high end of reserved LCN for SVC.
For FRSM12 card: Not Supported | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.15 |
| portSvcDlciLow The value of this object identifies the
low end of reserved DLCI for SVC.
For FRSM12 card: Not Supported. | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.16 |
| portSvcDlciHigh The value of this object identifies the
high end of reserved DLCI for SVC.
For FRSM12 card: Not Supported. | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.17 |
| portDeleteSvcs The value of this object indicates
that all the SVC connections on a given frame
relay port has to be deleted.
For FRSM12 card: Not Supported | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18 |
| portIngrSvcBandW The value of this object identifies the
Ingress bandwidth reserved for SVC.
For FRSM12 card: Not Supported | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.19 |
| portLineNum This object represents the physical line number
on which the frame relay port need to be created.
For Service Modules, supporting ifTable, this
must be the ifInde… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.2 |
| portEgrSvcBandW The value of this object identifies the
Egress bandwidth reserved for SVC.
For FRSM12 card: Not Supported. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.20 |
| portBERTEnable The value of this object enables/disables the
Bit Error Rate Testing (BERT) on the frame
relay port.
For FRSM12 card: Not Supported | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21 |
| portEnhancedSIW This variable enables/disables enhanced SIW feature.
Enabling this permits support for SIW translation of
Appletalk. This feature is supported only in
the FRSM-VHS card.
… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.22 |
| portM32EgrQueueThresh This represents the M32 logical port Egress Queue
threshold in bytes. Frames will not be queued
until the number of bytes in the queue is less than
the threshold. The default va… | column | bytes Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.23 |
| portHeaderLen The value of this object identifies the
Q.922 address field length and DLCI length
for this UNI/NNI logical port.
This object can not be modified if there are any
f… | column | Octets Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.24 |
| portFileId The value of this object identifies the
Service Class Template(SCT) file ID.
The SCT holds the module specific configuration
parameters for the frame relay port.
T… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.26 |
| portOverSubEnable The value of this object enables/disables the
port to be over subscribed.
This object is not applicable to MGX Release 1.x. | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.27 |
| portRowStatus The value of this object is used for creating
modifying or deleting frame relay ports.
The possible values are :
add(1) : Create frame relay port
… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.3 |
| portDs0ConfigBitMap This respesents bit map of DS0s for a line/interface
which are used to form this logical port.
The Bit 0 represents DS0-1(First DS0 timeslot).
This o… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.4 |
| portDs0Speed The value of this object is used for
configuring the port speed(or data rate) of
Ds0 in frame relay port.
speed56k(1) : set to 56k
speed64k(2) : set to 64k
unUsed(… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5 |
| portFlagsBetweenFrames Number of flags transmitted between FR frames
For FRSM12 card:
Only the values 1 to 8 are supported. The mapping is as follows:
MIB object value No. of HDLC flags inserted
… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.6 |
| portEqueueServiceRatio Number of times queue 1 is serviced
for every time queue 2 is serviced.
The value 0 is supported only by FRSM-VHS.
FRSM-VHS supports two different egress queue
s… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7 |
| portSpeed The value of this object contains the
Configured speed of port. | column | kbps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.8 |
| portAdmin The value of this object is used for
changing the desired state of the port.
up(1) : Up the port;Admin up
down(2) : Down the port;Admin down
For Se… | column | Enumeration | .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.9 |