CISCO-WAN-FR-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
84

frPortCnfPortGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.1.1.1 · 1 row entry · 27 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frPortCnfPortGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-PORT-MIB::frPortCnfPortGrpTable' 
This table is used for creating/configuring 
Frame Relay Logical(referred to as frame relay port)Ports. 
          
Relation with ifTable: 
          
    The modules in which ifTable is implemented,
    the creation of frame relay port in this table
    will cause an entry to be created in ifTable.
    The possible interfaces that are created in
    ifTable are identified by ifType = frameRelayService(44)
    and frForward(158).
          
    The deletion of an entry in this table causes
    the corresponding entry in ifTable to be deleted.
frPortCnfPortGrpEntry row .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1
An entry in the frame relay port table.
Indexes
Column Syntax OID
portNum
This is the frame relay(logical) port number.

For Service Modules, supporting ifTable, this
must be the ifIndex value of the frame relay port.

The port number value supported depends upon …
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.1
portLineNum
This object represents the physical line number
on which the frame relay port need to be created.

For Service Modules, supporting ifTable, this
must be the ifIndex value of the physical line
or logical …
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.2
portRowStatus
The value of this object is used for creating
modifying or deleting frame relay ports.

The possible values are :

add(1) : Create frame relay port
del(2) : Delete frame relay port
mod(…
Enumerationr/w
Enumerated Values:
1add
2del
3mod
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.3
portDs0ConfigBitMap
This respesents bit map of DS0s for a line/interface
which are used to form this logical port.

The Bit 0 represents DS0-1(First DS0 timeslot).

This object is not applicable for unchannelize…
Integer32r/w
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.4
portDs0Speed
The value of this object is used for
configuring the port speed(or data rate) of
Ds0 in frame relay port.

speed56k(1) : set to 56k
speed64k(2) : set to 64k
unUsed(3) : Not applicable.

Th…
Enumerationr/w
Enumerated Values:
1speed56k
2speed64k
3unUsed
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5
portFlagsBetweenFrames
Number of flags transmitted between FR frames
For FRSM12 card:
Only the values 1 to 8 are supported. The mapping is as follows:
MIB object value No. of HDLC flags inserted
1 1
2 …
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.6
portEqueueServiceRatio
Number of times queue 1 is serviced
for every time queue 2 is serviced.
The value 0 is supported only by FRSM-VHS.

FRSM-VHS supports two different egress queue
servicing algorithms depending on the Egr…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7
portSpeed
The value of this object contains the
Configured speed of port.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.8
portAdmin
The value of this object is used for
changing the desired state of the port.

up(1) : Up the port;Admin up
down(2) : Down the port;Admin down

For Service Modules, supporting ifTable, this …
Enumerationr/w
Enumerated Values:
1up
2down
3write-Only
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.9
portType
The value of this object identifies the network
interface for this frame relay port.

The Possible values are:

frame-relay(1) : Frame Relay Service Port

frFUNI (2) …
Enumerationr/w
Enumerated Values:
1frame-relay
2frFUNI
3frame-forward
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10
portSvcStatus
The value of this object is used for enabling/disabling
the SVC operation on a frame relay port.
For FRSM12 card: Not Supported
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.11
portSvcInUse
The value of this object is used for representing
whether SVC is in use or not.
For FRSM12 card: Not Supported
Enumerationr/w
Enumerated Values:
1not-use
2in-use
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.12
portSvcShareLcn
The value of this object identifies the
SVC shared LCN type.

For FRSM12 card: Not Supported
Enumeration
Enumerated Values:
1port-based
2card-based
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.13
portSvcLcnLow
The value of this object identifies the
low end of the reserved LCN for SVC.
For FRSM12 card: Not Supported
Integer32
Constraints:
range: 16-4015
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.14
portSvcLcnHigh
The value of this object identifies the
high end of reserved LCN for SVC.

For FRSM12 card: Not Supported
Integer32
Constraints:
range: 16-4015
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.15
portSvcDlciLow
The value of this object identifies the
low end of reserved DLCI for SVC.
For FRSM12 card: Not Supported.
Integer32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.16
portSvcDlciHigh
The value of this object identifies the
high end of reserved DLCI for SVC.

For FRSM12 card: Not Supported.
Integer32
Constraints:
range: 0-1023
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.17
portDeleteSvcs
The value of this object indicates
that all the SVC connections on a given frame
relay port has to be deleted.

For FRSM12 card: Not Supported
Enumerationr/w
Enumerated Values:
1delete
2other
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18
portIngrSvcBandW
The value of this object identifies the
Ingress bandwidth reserved for SVC.
For FRSM12 card: Not Supported
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.19
portEgrSvcBandW
The value of this object identifies the
Egress bandwidth reserved for SVC.
For FRSM12 card: Not Supported.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.20
portBERTEnable
The value of this object enables/disables the
Bit Error Rate Testing (BERT) on the frame
relay port.

For FRSM12 card: Not Supported
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21
portEnhancedSIW
This variable enables/disables enhanced SIW feature.
Enabling this permits support for SIW translation of
Appletalk. This feature is supported only in
the FRSM-VHS card.

This object is not required in FR…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.22
portM32EgrQueueThresh
This represents the M32 logical port Egress Queue
threshold in bytes. Frames will not be queued
until the number of bytes in the queue is less than
the threshold. The default value is 6000. Using a very low
value coul…
bytesInteger32r/w
Constraints:
range: 1-6000
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.23
portHeaderLen
The value of this object identifies the
Q.922 address field length and DLCI length
for this UNI/NNI logical port.

This object can not be modified if there are any
frame relay connections that are configur…
OctetsEnumerationr/w
Enumerated Values:
1twoOctets
2fourOctets
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.24
portFrameChkSumType
The value of this object identifies the CRC Length
in the HDLC Packet. Applicable for FrameForwarding
ports only.

This object can not be modified if there are any
frame relay connections that are configur…
Enumerationr/w
Enumerated Values:
1crc16
2crc32
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25
portFileId
The value of this object identifies the
Service Class Template(SCT) file ID.
The SCT holds the module specific configuration
parameters for the frame relay port.

This object is not applicable to MGX Rele…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.26
portOverSubEnable
The value of this object enables/disables the
port to be over subscribed.

This object is not applicable to MGX Release 1.x.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.27

frPortsUsedLineGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.1.1.11 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frPortsUsedLineGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-PORT-MIB::frPortsUsedLineGrpTable' 
This table Contains information on the DS0 time slots
used in each DS1 interface.
frPortsUsedLineGrpEntry row .1.3.6.1.4.1.351.110.5.1.1.1.1.11.1
An entry for each DS1 interface.
Indexes
Column Syntax OID
frPortsUsedLineIndex
This object uniquely identifies the
DS1 interface.
Integer32
Constraints:
range: 1-56
 .1.3.6.1.4.1.351.110.5.1.1.1.1.11.1.1
frPortsUsedLine
The value of this object provides the information
on DS0 time slots used by the DS1 identified by
'frPortsUsedLineIndex' object.

A bit set represents a DS0 that is used by all the
logical ports defined s…
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.110.5.1.1.1.1.11.1.2

frPortServiceQueGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.1.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frPortServiceQueGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-PORT-MIB::frPortServiceQueGrpTable' 
The config table is for logical port interface. 
In FRSM-VHS, there are 256 entries for FRSM-2CT3 card and
2 entries for FRSM-T3/E3/HS2/T3B/E3B/HS2B-HSSI cards and
8 entries for FRSM-HS2B-12IN1. The table is 
supported only in FRSM-VHS when the object egrQosFeature
in the cardSpecific group is set to egrQosFeatureEnabled.
frPortServiceQueGrpEntry row .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1
An entry for logical port.
Indexes
Column Syntax OID
frServPortNum
This is the frame relay port number.

The value of this object must match with the
value of object 'portNum' in frPortCnfPortGrpTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.1
portServiceQueueNo
This identifies the Q depending on the Service Type
1 High Priority Queue
2 rt VBR Queue
3 nrt VBR and ABR Queue
4 UBR Queue
queue5(5) to queue8(8) are reserved for future use
There are 8 queues but only four are being …
Enumerationr/w
Enumerated Values:
1highpriorityQ
2rtVBRQ
3nrtVBRandABRQ
4uBRQ
5queue5
6queue6
7queue7
8queue8
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.2
portEgresQDepth
Indicates the peak Egress queue depth for
the frame relay port. The total queue depth of
all connections mapped to this queue should not
exceed this value.
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.3
portEgresECNThresh
ECN threshold for the frame relay port.
If the total queue depth of all connections
mapped to this port queue exceeds this threshold,
then the appropriate ECN bit (FECN in the downstream direction and
BECN in the upstr…
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.4
portEgresDEThresh
DE threshold for the frame relay port.
If the total queue depth of all connections
mapped to this port queue exceeds this threshold,
and the DE bit is set in the incoming frame, then
the frame gets dropped.
Integer32r/w
Constraints:
range: 0-2097151
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.5
portQBwInc
Denotes the bandwidth increment for this
port queue. The bandwidth increment is the
percentage of the port bandwidth used by all
connections mapped to a particular queue scaled
by the value 16384.
Integer32
Constraints:
range: 0-16383
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.6
portBytesDiscXceedQueFull
Counter maintained for the no of bytes
discarded due to port queue depth exceeded.
BytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.7
portBytesDiscXceedDEThresh
Counter maintained for the no of bytes
discarded due to DE threshold exceeded.
BytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.1.4.1.1.8

frPortCntPortGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.2.1.1 · 1 row entry · 41 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frPortCntPortGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-PORT-MIB::frPortCntPortGrpTable' 
The config table is for logical port interface
there are upto 248 entries (for 8 E1s) or 192 
(for 8 T1s). In FRSM-VHS, there is support for
upto 256 entries.
frPortCntPortGrpEntry row .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1
An entry for logical port
Indexes
Column Syntax OID
cntPortNum
This is the frame relay(logical) port number.

The value of this object must be same as the
value of object 'portNum' in frPortCnfPortGrpTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.1
rcvPortFrames
The number of frames Received on the ingress.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.2
rcvPortBytes
The number of bytes Received on the ingress.
BytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.3
rcvPortFramesDE
The number of frames with DE bit set
received on the ingress.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.4
rcvPortFramesFECN
The number of frames with FECN bit set
received on the ingress.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.5
rcvPortFramesBECN
The number of frames with BECN bit set
received on the ingress.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.6
rcvFramesDiscCRCError
The number of frames discarded on the ingress
due to CRC error.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.7
rcvFramesDiscAlignmentError
The number of frames discarded on the ingress
due to Alignment error.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.8
rcvFramesDiscIllegalLen
The number of frames discarded on the ingress
due to illegal length.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.9
rcvFramesDiscIllegalHeader
The number of frames discarded on the ingress
due to illegal header.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.10
rcvFramesAbort
The number of received frames aborted
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.11
rcvFramesUnknownDLCI
The number of frames received with an unknown DLCI.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.12
rcvLastUnknownDLCI
The last unknown DLCI received.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.13
rcvPortFramesTaggedFECN
The number of frames received that were
tagged with FECN bit.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.14
rcvPortFramesTaggedBECN
The number of frames received that were
tagged with BECN bit.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.15
rcvPortFramesTaggedDE
The number of frames received that were
tagged with DE bit.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.16
rcvPortFramesDiscXceedDEThresh
The number of frames discarded on the ingress
due to exceeded DE Threshold.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.17
rcvPortKbpsAIR
Received Average Information Rate in KBPS.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.18
rcvBufNotAvailable
The number of times the receiver is turned off
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.19
xmtPortFrames
The number of frames transmitted.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.20
xmtPortBytes
The number of bytes transmitted.
BytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.21
xmtPortFramesFECN
The number of frames transmitted with
FECN bit already set.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.22
xmtPortFramesBECN
The number of frames transmitted with
BECN bit already set.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.23
xmtPortFramesDiscXceedQDepth
The number of frames discarded on the egress
due to exceeded queue depth

For FRSM12 Card: Not Supported
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.24
xmtPortBytesDiscXceedQDepth
The number of bytes discarded on the egress
due to exceeded queue depth

For FRSM12 Card: Not Supported
BytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.25
xmtPortFramesDuringLMIAlarm
The number of frames transmitted during
LMI logical port alarm
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.26
xmtPortBytesDuringLMIAlarm
The number of bytes transmitted during
LMI logical port alarm
BytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.27
xmtFramesAbort
The number of transmit frames aborted
For FRSM12 Card: Not Supported
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.28
xmtFramesUnderrun
The number of frames discarded due to underrun.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.29
xmtPortKbpsAIR
Transmit Average Information Rate in KBPS.
KbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.30
xmtBufNotAvailable
The number of times the transmitter is turned off

For FRSM12 Card: Not Supported
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.31
portClrButton
The value of this object is used for clearing
all the port related statistics counters.

clear(2) : Clears the Counters.
noaction(1) : No action taken.
Enumerationr/w
Enumerated Values:
1noaction
2clear
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.32
rcvFramesDiscNoChan
The number of frames received when no
channel is setup.
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.33
rcvFramesDiscOverrun
The number of frames discarded in Ingress direction
due to FIFO overrun in HDLC Controller.

This object is not applicable to MGX Release 1.x
FramesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.34
rcvPortFramesDiscard
Number of framesdiscarded in the ingress direction by
the port
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.35
xmtPortFramesDE
Number of frames transmitted in the egress direction
by the port with DE bit set to 1
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.36
xmtPortBytesDE
Number of bytes transmitted in the egress direction
by the port with DE bit set to 1
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.37
rcvPortBytesDE
Number of bytes received in the ingress direction
by the port with DE bit set to 1
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.38
xmtPortFramesDiscXceedDEThresh
Number of frames discarded in the egress direction
by the port due to exceeded DE Threshold
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.39
xmtPortBytesDiscXceedDEThresh
Number of bytes discarded in the egress direction
by the port due to exceeded DE Threshold
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.40
rcvPortBytesDiscXceedDEThresh
Number of bytes discarded in the ingress direction
by the port due to exceeded DE Threshold
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.351.110.5.1.1.2.1.1.1.41

frPortStateGrpTable

table
.1.3.6.1.4.1.351.110.5.1.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk frPortStateGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-WAN-FR-PORT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-WAN-FR-PORT-MIB::frPortStateGrpTable' 
Table of transmit/receive states of ports.
frPortStateGrpEntry row .1.3.6.1.4.1.351.110.5.1.1.3.1.1
An entry for logical port.
Indexes
Column Syntax OID
statePortNum
This is the frame relay(logical) port number.

The value of this object must match with the
value of object 'portNum' in frPortCnfPortGrpTable.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.351.110.5.1.1.3.1.1.1
portState
This variable indicates the state of the
logical port
Enumeration
Enumerated Values:
1notConfigured
2active
3remoteLoopback
4failedDueToLine
5failedDueToSignalling
6inactive
7inBert
8farEndRemoteLoopback
9latchDS0DropFeLoop
10latchDS0LineFeLoop
11latchOcuFeLoop
12latchCsuFeLoop
13latchDsuFeLoop
14latchHL96FeLoop
15v54PolynomialFeLoop
 .1.3.6.1.4.1.351.110.5.1.1.3.1.1.2
portSignallingState
Bit 0 = 0 -> LMI O.K. or not enabled
Bit 0 = 1 -> LMI failed
Bit 1 = 0 -> CLLM O.K. or not enabled
Bit 1 = 1 -> CLLM failed
Integer32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.351.110.5.1.1.3.1.1.3
portOversubscribed
This variable indicates the whether the port is
over subscribed or not.
Enumeration
Enumerated Values:
1false
2true
 .1.3.6.1.4.1.351.110.5.1.1.3.1.1.4
portIngrPercentUtil
Percentage Utilization of the Port in the Ingress
direction.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.351.110.5.1.1.3.1.1.5
portEgrPercentUtil
Percentage Utilization of the Port in the Egress
direction.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.351.110.5.1.1.3.1.1.6