portDeleteSvcs

CISCO-WAN-FR-PORT-MIB · .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18

Object

column r/w Enumeration

The value of this object indicates 
that all the SVC connections on a  given frame 
relay port has to be deleted.
              
For FRSM12 card: Not Supported

Context

MIB: CISCO-WAN-FR-PORT-MIB
OID: .1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.18
Type: column
Access: readwrite
Status: current
Parent: frPortCnfPortGrpEntry
Table: frPortCnfPortGrpTable
Siblings: 26

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	delete
`2`	other

Related Objects

Sibling Objects

Object	Type	Syntax	OID
portNum This is the frame relay(logical) port number. For Service Modules, supporting ifTable, this must be the ifIndex value of the frame relay port. The p…	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.1`
portType The value of this object identifies the network interface for this frame relay port. The Possible values are: frame-relay(1) : Frame Relay Servic…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.10`
portSvcStatus The value of this object is used for enabling/disabling the SVC operation on a frame relay port. For FRSM12 card: Not Supported	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.11`
portSvcInUse The value of this object is used for representing whether SVC is in use or not. For FRSM12 card: Not Supported	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.12`
portSvcShareLcn The value of this object identifies the SVC shared LCN type. For FRSM12 card: Not Supported	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.13`
portSvcLcnLow The value of this object identifies the low end of the reserved LCN for SVC. For FRSM12 card: Not Supported	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.14`
portSvcLcnHigh The value of this object identifies the high end of reserved LCN for SVC. For FRSM12 card: Not Supported	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.15`
portSvcDlciLow The value of this object identifies the low end of reserved DLCI for SVC. For FRSM12 card: Not Supported.	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.16`
portSvcDlciHigh The value of this object identifies the high end of reserved DLCI for SVC. For FRSM12 card: Not Supported.	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.17`
portIngrSvcBandW The value of this object identifies the Ingress bandwidth reserved for SVC. For FRSM12 card: Not Supported	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.19`
portLineNum This object represents the physical line number on which the frame relay port need to be created. For Service Modules, supporting ifTable, this must be the ifInde…	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.2`
portEgrSvcBandW The value of this object identifies the Egress bandwidth reserved for SVC. For FRSM12 card: Not Supported.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.20`
portBERTEnable The value of this object enables/disables the Bit Error Rate Testing (BERT) on the frame relay port. For FRSM12 card: Not Supported	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.21`
portEnhancedSIW This variable enables/disables enhanced SIW feature. Enabling this permits support for SIW translation of Appletalk. This feature is supported only in the FRSM-VHS card. …	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.22`
portM32EgrQueueThresh This represents the M32 logical port Egress Queue threshold in bytes. Frames will not be queued until the number of bytes in the queue is less than the threshold. The default va…	column	bytes Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.23`
portHeaderLen The value of this object identifies the Q.922 address field length and DLCI length for this UNI/NNI logical port. This object can not be modified if there are any f…	column	Octets Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.24`
portFrameChkSumType The value of this object identifies the CRC Length in the HDLC Packet. Applicable for FrameForwarding ports only. This object can not be modified if there are any f…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.25`
portFileId The value of this object identifies the Service Class Template(SCT) file ID. The SCT holds the module specific configuration parameters for the frame relay port. T…	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.26`
portOverSubEnable The value of this object enables/disables the port to be over subscribed. This object is not applicable to MGX Release 1.x.	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.27`
portRowStatus The value of this object is used for creating modifying or deleting frame relay ports. The possible values are : add(1) : Create frame relay port …	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.3`
portDs0ConfigBitMap This respesents bit map of DS0s for a line/interface which are used to form this logical port. The Bit 0 represents DS0-1(First DS0 timeslot). This o…	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.4`
portDs0Speed The value of this object is used for configuring the port speed(or data rate) of Ds0 in frame relay port. speed56k(1) : set to 56k speed64k(2) : set to 64k unUsed(…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.5`
portFlagsBetweenFrames Number of flags transmitted between FR frames For FRSM12 card: Only the values 1 to 8 are supported. The mapping is as follows: MIB object value No. of HDLC flags inserted …	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.6`
portEqueueServiceRatio Number of times queue 1 is serviced for every time queue 2 is serviced. The value 0 is supported only by FRSM-VHS. FRSM-VHS supports two different egress queue s…	column	Integer32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.7`
portSpeed The value of this object contains the Configured speed of port.	column	kbps SNMPv2-SMIInteger32	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.8`
portAdmin The value of this object is used for changing the desired state of the port. up(1) : Up the port;Admin up down(2) : Down the port;Admin down For Se…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.1.1.1.1.1.1.9`