pagpDistributionAlgorithm

CISCO-PAGP-MIB · .1.3.6.1.4.1.9.9.98.1.2.1.1.5
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
pagpDistributionAlgorithm describes, in human terms, the method
used on this interface's agport to distribute outgoing data
frames
among its component interfaces.  'Source MAC address', 'Source
and
Destination MAC addresses', or 'IP flow: Source, Destination,
protocol type' might be typical values for
pagpDistributionAlgorithm.  If the interface is not aggregated
with an agport (pagpGroupIfIndex contains either 0 or the
interface's own ifIndex), pagpDistributionAlgorithm may contain
a
DisplayString of length 0.
              
See the managed device's operation manual to determine the exact
meaning of the information supplied in this variable.  A device
may implement more than one algorithm; selecting among those
algorithms is not possible within this MIB.
              
The maximum length of this DisplayString is 255 octets.

Context

MIB
CISCO-PAGP-MIB
OID
.1.3.6.1.4.1.9.9.98.1.2.1.1.5
Type
column
Access
readonly
Status
current
Parent
pagpProtocolConfigEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PAGP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PAGP-MIB::pagpDistributionAlgorithm'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-PAGP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PAGP-MIB::pagpDistributionAlgorithm.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-PAGP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-PAGP-MIB::pagpDistributionAlgorithm'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
ciscoPagpPagpGroupV1R1