Standard view Table view

CISCO-PAGP-MIB

Recognized by Observium 
        The MIB module for configuration of Fast Etherchannel
and the operation of the Port Aggregation Protocol (PAgP).
These features allow two or more physical interfaces to
be aggregated together to form a single agport.  This
agport behaves like a single interface with improved
bandwidth and/or availability over each of its component
physical interfaces.
        
You can monitor interfaces, agports, and related statistics
through the ifStackTable and ifTable entries.
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
Source file
CISCO-PAGP-MIB
Last revised
Identity
ciscoPagpMIB
Base OID
1.3.6.1.4.1.9.9.98
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC InterfaceIndexOrZero
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString MacAddress TEXTUAL-CONVENTION TimeStamp
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-PAGP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-PAGP-MIB::ciscoPagpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-PAGP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-PAGP-MIB::ciscoPagpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (46)
ciscoPagpMIB
.1.3.6.1.4.1.9.9.98
ciscoPagpMIBObjects
.1.3.6.1.4.1.9.9.98.1
pagpGroupCapabilityConfiguration
.1.3.6.1.4.1.9.9.98.1.1
pagpEtherChannelTable
.1.3.6.1.4.1.9.9.98.1.1.1
pagpEtherChannelEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.98.1.1.1.1
pagpEthcOperationMode r/w
PagpEthcOperationMode
 .1.3.6.1.4.1.9.9.98.1.1.1.1.1
pagpDistributionAddress r/w
Enumeration
 .1.3.6.1.4.1.9.9.98.1.1.1.1.10
pagpRate r/w
Enumeration
 .1.3.6.1.4.1.9.9.98.1.1.1.1.11
pagpInPacketTimeout r/w
SecondsUnsigned32
 .1.3.6.1.4.1.9.9.98.1.1.1.1.12
pagpDeviceId
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.9.9.98.1.1.1.1.2
pagpPhysGroupCapability
PagpGroupCapability
 .1.3.6.1.4.1.9.9.98.1.1.1.1.3
pagpOperGroupCapability
PagpGroupCapability
 .1.3.6.1.4.1.9.9.98.1.1.1.1.4
pagpAdminGroupCapability r/w
PagpGroupCapability
 .1.3.6.1.4.1.9.9.98.1.1.1.1.5
pagpPortPriority r/w
PagpPortPriority
 .1.3.6.1.4.1.9.9.98.1.1.1.1.6
pagpLearnMethod r/w
PagpLearnMethod
 .1.3.6.1.4.1.9.9.98.1.1.1.1.7
pagpGroupIfIndex
CISCO-TCInterfaceIndexOrZero
 .1.3.6.1.4.1.9.9.98.1.1.1.1.8
pagpDistributionProtocol r/w
Enumeration
 .1.3.6.1.4.1.9.9.98.1.1.1.1.9
pagpProtocol
.1.3.6.1.4.1.9.9.98.1.2
pagpProtocolConfigTable
.1.3.6.1.4.1.9.9.98.1.2.1
pagpProtocolConfigEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.98.1.2.1.1
pagpOperationMode r/w
PagpOperationMode
 .1.3.6.1.4.1.9.9.98.1.2.1.1.1
pagpPartnerIfIndex
CISCO-TCInterfaceIndexOrZero
 .1.3.6.1.4.1.9.9.98.1.2.1.1.10
pagpPartnerGroupCapability
PagpGroupCapability
 .1.3.6.1.4.1.9.9.98.1.2.1.1.11
pagpPartnerGroupIfIndex
CISCO-TCInterfaceIndexOrZero
 .1.3.6.1.4.1.9.9.98.1.2.1.1.12
pagpPartnerDeviceName
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.9.9.98.1.2.1.1.13
pagpPartnerPortName
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.9.9.98.1.2.1.1.14
pagpPartnerAgportMACAddress
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.9.9.98.1.2.1.1.15
pagpPortState
Enumeration
 .1.3.6.1.4.1.9.9.98.1.2.1.1.2
pagpLastStateChange
SNMPv2-TCTimeStamp
 .1.3.6.1.4.1.9.9.98.1.2.1.1.3
pagpHelloFrequency
Enumeration
 .1.3.6.1.4.1.9.9.98.1.2.1.1.4
pagpDistributionAlgorithm
SNMPv2-TCDisplayString
 .1.3.6.1.4.1.9.9.98.1.2.1.1.5
pagpPartnerCount
Enumeration
 .1.3.6.1.4.1.9.9.98.1.2.1.1.6
pagpPartnerDeviceId
SNMPv2-TCMacAddress
 .1.3.6.1.4.1.9.9.98.1.2.1.1.7
pagpPartnerLearnMethod
PagpLearnMethod
 .1.3.6.1.4.1.9.9.98.1.2.1.1.8
pagpPartnerPortPriority
PagpPortPriority
 .1.3.6.1.4.1.9.9.98.1.2.1.1.9
pagpProtocolStatsTable
.1.3.6.1.4.1.9.9.98.1.2.2
pagpProtocolStatsEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.98.1.2.2.1
pagpInPackets
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.98.1.2.2.1.3
pagpOutPackets
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.98.1.2.2.1.4
pagpInFlushes
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.98.1.2.2.1.5
pagpReturnedFlushes
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.98.1.2.2.1.6
pagpOutFlushes
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.98.1.2.2.1.7
pagpInErrors
packetsSNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.98.1.2.2.1.8
ciscoPagpMIBConformance
.1.3.6.1.4.1.9.9.98.3
ciscoPagpMIBCompliances
.1.3.6.1.4.1.9.9.98.3.1
ciscoPagpMIBGroups
.1.3.6.1.4.1.9.9.98.3.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-TCcisco
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. CISCO-PAGP-MIBciscoselected
Type Definitions (5)
PagpEthcOperationMode
Enumeration
off(1)
manual(2)
pagpOn(3)
PagpGroupCapability
Integer32
PagpLearnMethod
Enumeration
physPort(1)
agPort(2)
undefined(3)
PagpOperationMode
Enumeration
desirable(1)
desirableSilent(2)
automatic(3)
automaticSilent(4)
PagpPortPriority
Integer32 range: 0..255
Conformance Groups (4)
ciscoPagpEthcGroupV1R1 obsolete
pagpEthcOperationMode pagpDeviceId pagpPhysGroupCapability pagpOperGroupCapability pagpAdminGroupCapability pagpPortPriority pagpLearnMethod pagpGroupIfIndex
The collection of objects which are used
to configure and monitor the Fast Etherchannel
operation and interface group-capability.
 .1.3.6.1.4.1.9.9.98.3.2.1
ciscoPagpPagpGroupV1R1
pagpOperationMode pagpPortState pagpLastStateChange pagpHelloFrequency pagpDistributionAlgorithm pagpPartnerCount pagpPartnerDeviceId pagpPartnerLearnMethod pagpPartnerPortPriority pagpPartnerIfIndex pagpPartnerGroupCapability pagpPartnerGroupIfIndex pagpPartnerDeviceName pagpPartnerPortName pagpPartnerAgportMACAddress pagpInPackets pagpOutPackets pagpInFlushes pagpReturnedFlushes pagpOutFlushes pagpInErrors
The collection of objects which are used
to configure and monitor the Port Aggregation Protocol
(PAgP) for the automatic negotiation and configuration of
Fast Etherchannel.
 .1.3.6.1.4.1.9.9.98.3.2.2
ciscoPagpEthcGroupV2R2
pagpEthcOperationMode pagpDeviceId pagpPhysGroupCapability pagpOperGroupCapability pagpAdminGroupCapability pagpPortPriority pagpLearnMethod pagpGroupIfIndex pagpDistributionProtocol pagpDistributionAddress
The collection of objects which are used
to configure and monitor the Fast Etherchannel
operation and interface group-capability.
 .1.3.6.1.4.1.9.9.98.3.2.3
ciscoPagpRateAndTimeOutGroup
pagpRate pagpInPacketTimeout
A collection of objects which provide the information about
rate and timeout configuration for PAgP protocol on capable
interfaces.
 .1.3.6.1.4.1.9.9.98.3.2.4
Compliance Statements (3)

OID .1.3.6.1.4.1.9.9.98.3.1.1
Conformance statement for the Fast Ethernet and Port
Aggregation Protocol MIB.
Required groups
mandatory ciscoPagpEthcGroupV1R1
optional ciscoPagpPagpGroupV1R1 This group is mandatory for all interfaces which
implement the Port Aggregation Protocol (PAgP), and which
the value pagpOn(3) in the pagpEthcOperationMode variable.
Object refinements
ObjectAccessSyntaxDescription
pagpEthcOperationMode
PagpEthcOperationMode
off(1), manual(2)
Interfaces which do not implement the Port Aggregation
Protocol (PAgP) do not require the value pagpOn(3).

OID .1.3.6.1.4.1.9.9.98.3.1.2
Conformance statement for the Fast Ethernet and Port
Aggregation Protocol MIB.
Required groups
mandatory ciscoPagpEthcGroupV2R2
optional ciscoPagpPagpGroupV1R1 This group is mandatory for all interfaces which
implement the Port Aggregation Protocol (PAgP), and which
the value pagpOn(3) in the pagpEthcOperationMode variable.
Object refinements
ObjectAccessSyntaxDescription
pagpEthcOperationMode
PagpEthcOperationMode
off(1), manual(2)
Interfaces which do not implement the Port Aggregation
Protocol (PAgP) do not require the value pagpOn(3).

OID .1.3.6.1.4.1.9.9.98.3.1.3
Conformance statement for the Fast Ethernet and Port
Aggregation Protocol MIB.
Required groups
mandatory ciscoPagpEthcGroupV2R2
optional ciscoPagpPagpGroupV1R1 This group is mandatory for all interfaces which
implement the Port Aggregation Protocol (PAgP), and which
the value pagpOn(3) in the pagpEthcOperationMode variable.
optional ciscoPagpRateAndTimeOutGroup This group is mandatory for platforms which support the rate
and timeout configuration for Port Aggregation Protocol (PAgP)
on capable interfaces.
Object refinements
ObjectAccessSyntaxDescription
pagpEthcOperationMode
PagpEthcOperationMode
off(1), manual(2)
Interfaces which do not implement the Port Aggregation
Protocol (PAgP) do not require the value pagpOn(3).