dsx3PlcpRAISeverity
CISCO-MGX82XX-DSX3-MIB ·
.1.3.6.1.4.1.351.110.4.4.2.2.1.1.2
Object
column
r/w
Enumeration
This variable is used to setup the severity of PLCP RAI alarm. So when PLCP RAI alarm is detected the card will send the alarm with appropriate severity status. A major alarm will cause the audible notification and the MAJOR ALARM LED will be turned ON. A minor alarm will just turn on the MINOR ALARM LED.
Context
- MIB
- CISCO-MGX82XX-DSX3-MIB
- OID
.1.3.6.1.4.1.351.110.4.4.2.2.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dsx3PlcpAlarmConfigEntry
- Table
- dsx3PlcpAlarmConfigTable
- Siblings
- 17
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | minor |
2 | major |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsx3PlcpRedSeverity This variable is used to setup the severity of PLCP RED
alarm. So when PLCP_OOF alarm is detected the card will
declare the alarm with appropriate severity status.
A major alarm w… | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.1 |
| dsx3PlcpBip8CV24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 m… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.10 |
| dsx3PlcpBip8ES15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.11 |
| dsx3PlcpBip8ES24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 mi… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.12 |
| dsx3PlcpBip8SES15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.13 |
| dsx3PlcpBip8SES24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 m… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.14 |
| dsx3PlcpSEFS15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.15 |
| dsx3PlcpSEFS24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 mi… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.16 |
| dsx3PlcpUAS15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.17 |
| dsx3PlcpUAS24HrThreshold The value set in this object determines the
value which when exceeded in a sliding 24 hour
window causes a statistical alarm to be declared.
The threshold is checked every 15 mi… | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.18 |
| dsx3PlcpLssSeverity This variable is used to setup the severity of
PLCP RAI alarm. So when PLCP LSS alarm is detected
the card will send the alarm with appropriate severity
status.
A major alarm wi… | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.3 |
| dsx3PlcpLssEnable This objects specifies whether the LSS feature is
enabled/disabled. | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.4 |
| dsx3PlcpLssCodeConnected This object derfines the value of the LSS code
that is to be interpreted as Link Connected. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.5 |
| dsx3PlcpLssCodeRxLinkDn This object defines the value of the LSS code
that is to be identified as Receive Link Down. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.6 |
| dsx3PlcpLssCodeRxLinkUp This object defines the value of the LSS code that
is to be interpreted as Receive Link Up. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.7 |
| dsx3PlcpStatisticalAlarmSeverity This variable sets up the severity of PLCP Statistical
alarm. So when PLCP Statistical alarm is detected, the
card will send the alarm with appropriate severity.
A major alarm wi… | column | Enumeration | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.8 |
| dsx3PlcpBip8CV15MinThreshold The value set in this object determines the
value which when exceeded in a 15 minute window
causes a statistical alarm to be declared. | column | Integer32 | .1.3.6.1.4.1.351.110.4.4.2.2.1.1.9 |